Operation Manual

29
3 Driver Software Installation – MS-DOS
3.4 Installation in MS-DOS
Special DOS driver software is supplied with the ISDN-
Controller. Once installed, the driver provides the appli-
cation interface COMMON-ISDN-API (CAPI) Version 2.0 to
all programs (see the Appendix). This CAPI driver also
supports applications designed for CAPI Version 1.1.
Before starting the software installation, make sure that
the ISDN-Controller card has been installed correctly in
your computer and set to an I/O address that is not used
by any other adapter in your PC (see Chapter 2, “Hard-
ware Installation”).
3.4.1 Installing the Driver Software
The driver software for the AVM ISDN-Controller B1 is
installed on your computer using a simple installation
program.
1. Insert the driver CD supplied with the ISDN-Control-
ler into your CD-ROM drive.
2. Change the current drive to your CD-ROM drive by
entering the drive letter (with colon) at the DOS
prompt, e.g. D:. Then use the DOS command cd to
change to the directory containing the DOS drivers:
\CARDWARE\A1\DOS\<Language>
<Language>: Specify the directory with the driver
software for your country (“English” for European
countries or “USA”).
Start the installation program by entering
install <RETURN>
at the DOS prompt. If the installation files are
located on a different drive or in a subdirectory, use
the appropriate path name.
3. The installation routine’s sign-on screen appears.
Installation can be aborted at any time by pressing
Ctrl+X. To proceed with installation, press Return.
Check I/O address
CAPI