Operation Manual

28
3 Driver Software Installation – Windows 3.x
In order to implement the changes, you must restart
Windows.
The AVM ISDN-Controller is loaded automatically when-
ever Windows is started and deactivated when Windows
is closed.
If the Controller’s I/O address and interrupt have to be
changed at a later date, e.g. because of new hardware
components, reset the jumpers on the Controller first.
Then start the A1 Setup program and enter the new
values as described above.
3.3.3 Uninstalling the Controller
To uninstall the AVM ISDN-Controller A1 in Windows
3.x, start the setup program on the driver CD.
The setup indicates that an installed Controller was
found. Select the “Deinstallation” option and follow the
instructions on the screen.