Operation Manual

Installing the Driver Software
Controller A1 PCMCIA – 4 Installing the Driver Software in Windows 98 19
US only: The next dialog asks you to enter your first
complete ISDN directory number (area code plus tele-
phone number) in the first input field. In the second
field, enter your first complete SPID.
In the following dialog box, enter your second complete
ISDN directory number and your second SPID. If you
have been assigned only one directory number and one
SPID, leave the input fields in this dialog blank and
click “Continue”.
4. At the end of the installation procedure, and informa-
tion window displaying the controller settings appears.
Click “Continue”.
The AVM ISDN-Controller A1 PCMCIA has therefore been in-
stalled in Windows 98.
The new “AVM” program group is created in the “Start / Pro-
grams” menu. The program group contains the “A1 PCMCIA
Readme”, “A1 PCMCIA Setup”, “A1 PCMCIA Test” programs
and “AVM Internet Homepage” (a link with the AVM's Inter-
net site).
US only: In addition to the above files, your AVM pro-
gram folder also contains the program A1 PCMCIA SPID Tool.
With this tool, you can change the Directory Number(s) and
SPID(s) for the ISDN-Controller. Restart Windows 98 to acti-
vate the changes.
Note that the “Startup” folder also contains the program
SPID Test. This test program runs automatically each time
Windows is started and the ISDN-Controller A1 PCMCIA is
loaded. SPID Test runs in the background, contacting the
ISDN switch and checking the validity of your SPIDs. If your
SPIDs are valid, no message is displayed; otherwise, a mes-
sage appears. If you want to change the SPIDs at this time,
select “Yes” in the message window. The program A1 PCMCIA
SPID Tool is opened. Enter the desired changes and restart
Windows.
a1pcm_e.book Seite 19 Mittwoch, 18. Juli 2001 11:22 11