Operating Instructions and Installation Instructions

USB Hub
FRITZ!Box Fon WLAN 7570 vDSL 55
1. Insert the your stick into the USB port on the
FRITZ!Box.
The WLAN security settings are transmitted automati-
cally to the FRITZ!WLAN USB Stick. The “INFO” LED on
the FRITZ!Box begins flashing rapidly.
As soon as the “INFO” LED stops flashing, transmis-
sion of the settings has been concluded.
2. Remove the FRITZ!WLAN USB Stick from the device.
3. After the security settings have been transmitted auto-
matically, you can insert the FRITZ!WLAN USB Stick in
a computer.
Now the FRITZ!WLAN USB Stick is ready to establish a con-
nection to the FRITZ!Box. No further settings are necessary.
8.7 USB Hub
A USB hub can be connected to the USB host controller. A
USB hub is a device to extend existing USB ports.
You can connect two USB mass storage devices and one
USB printer, or three USB mass storage devices (like a hard
drive or memory stick) to the USB hub.
We strongly advise to use a USB hub with its own power
supply.