Operating Instructions and Installation Instructions

Displaying the Incoming Caller ID (CLIP)
80
Displaying the Incoming Caller ID (CLIP)
The CLIP (Calling Line Identification Presentation) function
makes the number of callers—external and internal—visi-
ble on your telephone display.
The CLIP function is enabled in the factory settings. This
function can be permanently disabled and enabled again.
Enabling CLIR Permanently
N Pick up the handset.
r51<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dial-
ing the sequence shown at left.
O Hang up the handset.
Disabling CLIR Permanently
N Pick up the handset.
r51<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dial-
ing the sequence shown at left.
O Hang up the handset.
CLIR on a Case-by-case Basis
N Pick up the handset.
s31r Dial the sequence shown at left. Now
you hear the external dial tone.
M Dial the number you want to call.
This feature is only effective if your telephone supports
CLIP.