Operation Manual

Connecting the Computer(s)
16 FRITZ!Box Fon WLAN – 2 FRITZ!Box Fon WLAN 7140: Connecting
Connecting
1. Connect the longer, gray end of the cable to the socket
labeled “DSL/TEL”, located at the far left of the back
panel of the FRITZ!Box Fon WLAN.
2. Then connect the gray end of the Y-branch to the socket
on the DSL splitter labeled “DSL”.
The black end of the cable’s Y-branch is not needed for
connection to the DSL splitter.
The green “Power” LED stops flashing after a short time
and remains lit to signalize that FRITZ!Box Fon WLAN is
ready for Internet connections over DSL.
2.4 Connecting the Computer(s)
If you would like to surf the web using the FRITZ!Box Fon
WLAN or to open the FRITZ!Box Fon WLAN user interface,
then you must connect a computer with the FRITZ!Box Fon
WLAN.
A computer can be connected with the FRITZ!Box Fon WLAN
in two different ways:
z using a LAN port of the FRITZ!Box Fon WLAN
z wirelessly via WLAN
One computer can be connected to FRITZ!Box Fon WLAN by
only one of these means.
One computer can be connected to each of the four LAN
ports of FRITZ!Box Fon WLAN, and several computers can be
connected with FRITZ!Box Fon WLAN at the same time via
WLAN.
The way a computer is connected to the FRITZ!Box Fon WLAN
is the same regardless of the operating system on the com-
puter.
All of the computers connected with the FRITZ!Box Fon WLAN
constitute a network.