Operation Manual

Product Details
FRITZ!Box Fon WLAN – 13 Product Details 115
13 Product Details
This chapter provides you with product details on FRITZ!Box
Fon WLAN. You receive detailed technical data and informa-
tion on the LEDs.
13.1 The FRITZ!Box Fon WLAN LEDs
The LEDs on your FRITZ!Box Fon WLAN indicate the following
conditions:
LED State Event Type
Power/
DSL
on FRITZ!Box Fon WLAN 7140 ready for opera-
tion; power supply is connected and the
DSL line is ready for operation
flashes Power supply connected;
the connection to DSL is being established
or has been interrupted
Internet on a telephone connection to the Internet is
active
flashes there are messages in your mailbox (this
function must be supported by your Inter-
net telephony provider)
Fixed
Line
on a telephone connection to the fixed-line
network is active
flashes there are messages in your mailbox (this
function must be supported by your tele-
phony provider)
WLAN on the WLAN function is enabled
flashes the WLAN function is being enabled or dis-
abled
INFO flashes firmware is being updated or
the value specified for the online meter has
been reached
on a telephone connection between two Inter-
net telephony subscribers is active, the call
is free of charge (this function must be sup-
ported by your Internet telephony provider)