Operation Manual

FRITZ!Box Fon ata LEDs
FRITZ!Box Fon ata – 1 This Is FRITZ!Box Fon ata 13
1.3 FRITZ!Box Fon ata LEDs
The LEDs on your FRITZ!Box Fon ata indicate the following con-
ditions:
1.4 Technical Specifications of FRITZ!Box Fon ata
z Approximate dimensions: 160 x 122 x 31 mm
z One USB port (USB version 1.1)
z One network port (WAN) for connection to the Internet
via RJ45 socket (standard Ethernet, 10/100 base-T); con-
nection via DSL modem, cable modem or router
z One LAN port over RJ45 socket
(standard Ethernet, 10/100 base-T)
z Two extensions over RJ12 sockets
z Five LEDs indicate the condition of the device
z Supply voltage: 230 V / 50 Hz
z Maximum power consumption: 9 W
z Average power consumption: 6 W
z Data transmission rate: max. 8 Mbit/s (downstream),
1 Mbit/s (upstream)
LED Event Type
Power shows the operation status of FRITZ!Box Fon ata
remains lit when power current is flowing
Internet remains lit when a telephone connection to the Inter-
net is active
Fixed
Line
remains lit when a telephone connection to the Inter-
net over the fixed-line network is active
Internet remains lit when the PBX is connected with the Inter-
net or the local network
INFO flashes when the system software is being updated
remains lit when phone calls are conducted complete-
ly over the Internet (this feature must be supported by
the Internet telephony provider)