Operation Manual

LEDs
FRITZ!Box 7560 15
Meaning of the LEDs
LED Condition Meaning
Power/DSL on Device has electrical power and the DSL line is ready for
operation
flashing Device has electrical power and the connection to DSL is
being established or has been interrupted
Fon on Telephone connection to the Internet is active
flashing Messages in your voice mail or inbox
This function must be supported by your telephony provider
DECT on DECT function is enabled
flashing Registration procedure for a DECT device in progress
WLAN on Wireless LAN is enabled
flashing
• Switching wireless LAN function on or off
• Applying changes to the wireless LAN settings
• performing WPS
• WPS procedure aborted: More than two wireless LAN
devices are performing WPS at the same time. Repeat
the WPS procedure.
Info glows green
• Stick & Surf procedure with FRITZ!WLAN USB Stick from
AVM concluded
• The LED signals an event specified in the user interface
under “System / Buttons and LEDs / “Info” Display”
flashing
green
• Updating FRITZ!OS
• Stick & Surf procedure with FRITZ!WLAN USB Stick from
AVM in progress
• Signals an event specified in the user interface under
“System / Buttons and LEDs / “Info” Display”
lights or
flashes red
Error:
• Open the FRITZ!Box user interface.
• Follow the instructions on the “Overview” page in the
user interface