Operation Manual

FRITZ!Box 7560 130
Sharing a USB Printer
8. Click “Add” or “Add Port...”.
The USB printer has been configured and can be used as a
network printer.
Configuring a USB Printer in Other Operating Systems
• As the port type, select “Raw TCP”.
• Enter “9100” as the port.
• Enter fritz.box as the printer name.
If the printer is not displayed, you must first install the
printer drivers for this device. Consult the documenta-
tion of your printer for instructions.
The names of entries or menus in operating systems not de-
scribed above may be slightly different than the terms we
use here.
If the FRITZ!Box is configured as a wireless repeater or an IP
client, enter here the IP address at which the FRITZ!Box can
be reached within the network.