Operation Manual

Network Settings in the FRITZ!Box
FRITZ!Box 7560 117
Automatically from page 120.
Fixed IPv4 Addresses When the DHCP Server Is Enabled
If you would like to configure fixed IPv4 addresses on individ-
ual computers connected with the FRITZ!Box even though the
DHCP server is enabled, please note the following:
• The IPv4 addresses must be from the IPv4 network of the
FRITZ!Box.
• The IPv4 addresses may not come from the address
range of the DHCP server.
• Each IPv4 address can be assigned only once.
Changing the IP Address Range of the DHCP Server
If the DHCP server does not have enough IP addresses, you
can expand the address range.
Disabling the DHCP Server
You can disable the DHCP server of the FRITZ!Box.
• If you use a different DHCP server in your home network,
you must disable the DHCP server of the FRITZ!Box.
• If you want to manage the IP address assignments of all
devices in the home network yourself, you can disable
the DHCP server of the FRITZ!Box.
Please note that the FRITZ!Box must be located in the same IP
network as all of the device connected with it. Integrate the
FRITZ!Box in your network by adjusting the IP address of the
FRITZ!Box to your home network.