FRITZ!Box 7490 www.avm.de © AVM GmbH · Alt-Moabit 95 · 10559 Berlin · Telefon 030 39976-0 · info@avm.
Table of Contents Security and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Handling the FRITZ!Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Conventions in the Manual . . . . . . . . . . . . . . . . . . . . . . 11 1 The FRITZ!Box 7490 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2 Ports, Interfaces, Buttons and LEDs . . . . . . . . . . . .
7 The FRITZ!Box User Interface . . . . . . . . . . . . . . . . . . . . . 32 7.1 7.2 7.3 Opening the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Overview: FRITZ!Box at a Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Standard View and Advanced View . . . . . . . . . . . . . . . . . . . . . . . . . 34 8 Using System Functions of the FRITZ!Box . . . . . . . . . . . 35 8.1 8.2 8.3 8.4 8.5 8.6 Diagnostics: Checking FRITZ!Box Functions. . . . . . . .
12 Password Protection: Using FRITZ!Box Safely . . . . . . . . 58 12.1 12.2 12.3 12.4 12.5 Login with Password: FRITZ!Box Procedures . . . . . . . . . . . . . . . . . . 58 Using a FRITZ!Box Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Using FRITZ!Box Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Forgot Password—What to Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Mode “No login” . . . . . . . . . . . . . . . . . . . . .
16 FRITZ!Box as a Telephone System . . . . . . . . . . . . . . . . 114 16.1 16.2 16.3 16.4 16.5 16.6 16.7 16.8 16.9 16.10 16.11 Telephone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Call List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Answering Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Fax Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21 Assigning a FRITZ!Box Name . . . . . . . . . . . . . . . . . . . . 156 22 Controlling Smart Home Devices . . . . . . . . . . . . . . . . . 157 23 Configuring Internet Access for Guests . . . . . . . . . . . . 158 23.1 23.2 23.3 Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Wireless Guest Access: Private Hotspot . . . . . . . . . . . . . . . . . . . . . 158 Configuring Guest Access on the LAN 4 Port . . . . . . . . . . . . . . . . .
28 Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 28.1 28.2 28.3 28.4 28.5 Documentation on the FRITZ!Box . . . . . . . . . . . . . . . . . . . . . . . . . . 182 Information in the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 Feedback on FRITZ!Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 Assistance from the Support Team . . . . . . . . . . . . . . . . . . . . . . . . . 184 Manufacturer’s Warranty . . . . . . . .
Security and Handling Before installing and using the FRITZ!Box, please read the following security and handling instructions. Safety Instructions Before connecting the FRITZ!Box 7490, observe the following security instructions in order to protect yourself and the FRITZ!Box from harm. • Overloaded outlets, extension cords and power strips can lead to fires or electric shocks. – Avoid using sockets strips and extension cords if at all possible.
• The base of the FRITZ!Box can heat up during normal operation. This heat can cause damage to heat-sensitive surfaces. – Do not place the FRITZ!Box on heat-sensitive surfaces. • During electrical storms, lightning and electrical surges present a danger to connected electrical devices. – Do not install the FRITZ!Box during an electrical storm. – During a storm, disconnect the FRITZ!Box from the power supply and from the DSL or VDSL line.
FRITZ!Box 7490 • If you would like to establish wireless connections between the FRITZ!Box and the computer, position the FRITZ!Box at a central location. • Make sure to keep sufficient distance from potential sources of interference like microwave devices or electric devices with large metal housings.
Conventions in the Manual This manual uses the following symbols and emphases: This symbol marks useful hints and tips. This symbol indicates important instructions that must be observed to avoid malfunctions. • Quotation marks designate elements and features in the user interface and paths. Example Select the “Home Network / Smart Home” menu and then click “Register New Device”. • 95Pointed brackets mark wild cards. Example Press the keys sr. stands for a keyboard sequence.
The FRITZ!Box 7490 1 The FRITZ!Box 7490 Welcome! We are pleased you decided on a FRITZ!Box. The FRITZ!Box 7490 is the hub of your home network, connecting your computers and network devices with the Internet. You can operate the FRITZ!Box as an Internet router on a DSL or VDSL line. The FRITZ!Box is equipped with ports for computers, telephones and USB devices and supports the wireless technologies WLAN and DECT.
Ports, Interfaces, Buttons and LEDs 2 Ports, Interfaces, Buttons and LEDs This chapter describes the ports, interfaces, buttons and LEDs of the FRITZ!Box. 2.1 Ports and Interfaces DECT DSL/VDSL 2 x analog ISDN WLAN AC+N 4 x Gigabit 2 x USB 3.0/2.
Ports and Interfaces • USB 2 USB 3.0/2.0 ports for connecting USB devices like printers or storage media • Wireless access point Integrated wireless access point for connecting to wireless LAN devices that use the radio standard IEEE 802.11a, IEEE 802.11b, IEEE 802.11g or IEEE 802.11n (in the 2.
Buttons 2.2 Buttons Info Fixed Line WLAN Internet Power //DSL DSL The FRITZ!Box has two buttons on the top of the housing. FRITZ!Box buttons Button Functions “WLAN” Button • • Switch wireless LAN of the FRITZ!Box on and off Establish a wireless LAN connection using WPS, see Establishing a Wireless LAN Connection Using WPS from page 28 “DECT” Button FRITZ!Box 7490 • Register cordless telephones with the FRITZ!Box; see page 52. • Page cordless telephones you can’t find; see page 136.
LEDs 2.3 LEDs The FRITZ!Box 7490 has five LEDs, which flash or light up to display various connection statuses and events.
Before You Connect the FRITZ!Box 3 3.1 3.2 Before You Connect the FRITZ!Box • • See the information on Security and Handling on page 8. • Make sure that the requirements for operating the FRITZ!Box have been met; see page 17. Check the contents of your FRITZ!Box package. See page 17 to find out what is included in the package.
Requirements for Operation – or a USB modem for mobile Internet access (UMTS/HSPA) – or another Internet connection • for the wireless LAN connection to tablets, smartphones and computers: Tablets, smartphones or computers that support wireless LAN compliant with IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11a, or IEEE 802.11b.
Connecting the FRITZ!Box 4.1 Connecting the FRITZ!Box • Before you connect the FRITZ!Box, read the instructions on Security and Handling on page 8. • • • Connect the FRITZ!Box to the power supply. Connect the FRITZ!Box to your Internet connection. Connect the FRITZ!Box to your telephone line. Connecting to Electrical Power WLAN Fixed Line Internet Power/DSLL Info DECT 4 N WLA WPS Power DSL/TTEL FON S0 FON 2 FON 1 LANN44 LAN 3 LAN 2 LAN 1 Connecting to the power supply 1.
Connecting to the Internet 4.2 Connecting to the Internet The FRITZ!Box can be connected using various types of Internet connections: • • • • DSL/VDSL line Internet cable access using a cable modem Internet via mobile network using a UMTS/HSPA modem Internet connection of another router Connecting to a DSL or VDSL Line How to connect the FRITZ!Box depends on the type of your line. Line Sockets DSL or VDSL line with landline Connecting the FRITZ!Box Read the instructions on page 21.
Connecting to the Internet Connecting to a DSL or VDSL Line with a Landline Internet Power/DS LL Fixed Line DECT WLAN Info WLAN WPS Power /TTELL DSL/TE FON 2 FON 1 FON S0 LAN 2 LAN 1 LAN 3 LAN 4 Connecting to the DSL splitter If you have a DSL line and a telephone line, then connect the FRITZ!Box as follows: 1. Connect the long end of the DSL/telephone cable to the socket on the FRITZ!Box labeled “DSL/TEL”. 2.
Connecting to the Internet Connecting to the IP-based DSL or VDSL Line Power/DS Internet LL Festnetz DECT WLAN Info WLAN WPS Pow Powerer /TTELL DSL/TE FON S00 FON 2 FON 1 LAN 33 LAN 22 LAN LAN 1 LAN LAN LAN44 Connecting to the DSL or VDSL line If you have a DSL or VDSL line without a connection to the landline telephone network (also known as IP-based or direct access), then connect the FRITZ!Box as follows: 1.
Connecting to the Internet 3. Connect a computer with the FRITZ!Box either via wireless LAN or using a network cable; see Connecting a Computer with a Network Cable from page 26 and Connecting Computers with the FRITZ!Box over Wireless LAN from page 28. 4. Set up the Internet connection for connections via cable in the FRITZ!Box; see page 47.
Connecting to the Landline Telephone Network Connecting via Wireless LAN If the router is a wireless access point, you can also connect the FRITZ!Box with the router over wireless LAN. To do this the radio network of the router must work in the 2.4-GHz frequency band and use WPA encryption. Section Internet Connection over Wireless LAN on page 50 describes how to establish the wireless LAN connection and what to watch out for. 4.
Connecting to the Landline Telephone Network Connecting to the ISDN Line Fixed Line Internet Power/DSLL DECT WLAN Info N WLA WPS Power DSL/TTEL FON S0 FON 2 FON 1 LANN44 LAN 3 LAN 2 LAN 1 ISDN line 1. Insert the long, gray end of the DSL/telephone cable into the socket on the FRITZ!Box labeled “DSL/TEL”. 2. Insert the short, black end of the cable into a socket (S0 interface) on your ISDN NTBA.
Connecting a Computer with a Network Cable 5 Connecting a Computer with a Network Cable You can connect computers and other network devices with the FRITZ!Box using a network cable. 5.1 Connecting to the Computer One computer or other network device can be connected to each LAN port of the FRITZ!Box. Power/D Festnetz Internet SLL DECT WLAN Info WLAN WPS Power DSL/TTEL FON S0 FON 2 FON 1 LAN 4 LAN 3 LAN 2 LAN 1 Connecting a computer using a network cable 1.
Connecting a Network Hub or Switch 5.2 Connecting a Network Hub or Switch You can connect a network hub or network switch to the FRITZ!Box. Power/D Internet WLAN SLL Fixed Line Info WLAN WPS Power DSL/TTEL 1. FON S0 FON 2 FON 1 LAN 2 LAN 1 LAN 3 LAN 4 Insert the network cable included in the package into the uplink port of the network hub or network switch. You can also use any other network cable. For more information, see page 180. 2.
Connecting Computers with the FRITZ!Box over Wireless LAN 6 Connecting Computers with the FRITZ!Box over Wireless LAN Computers and other devices with wireless LAN, for instance smartphones and network printers, can be connected wirelessly with the FRITZ!Box. 6.
Establishing a Wireless LAN Connection Using WPS 2. Open the wireless LAN software on the computer. In Windows 8 and 7, for instance, click the wireless LAN symbol in the task bar. 3. Select the wireless radio network of the FRITZ!Box. The preconfigured name of the wireless LAN radio network is “FRITZ!Box Fon WLAN 7490”. 4. Click “Connect”.
Establishing a Wireless LAN Connection Using WPS Connecting to Other Wireless Devices Here is how to establish a wireless connection with WPS on a wireless LAN device without Windows: 1. If the “WLAN” LED on FRITZ!Box the is off, press the “WLAN” button briefly. The wireless radio network of the FRITZ!Box will be switched on. 2. Use your wireless device to search for wireless networks at your location. See the documentation of the wireless LAN device for instructions on how to do this. 3.
Establishing a Wireless LAN Connection with a Network Key 6.3 Establishing a Wireless LAN Connection with a Network Key You can establish a wireless LAN connection by entering the FRITZ!Box network key on the wireless device: 1. If the “WLAN” LED on the FRITZ!Box is off, press the “WLAN” button briefly. The wireless radio network of the FRITZ!Box will be switched on. 2. Open the wireless LAN software on your wireless device. In Windows 8.
The FRITZ!Box User Interface 7 The FRITZ!Box User Interface The FRITZ!Box has a user interface you can open in a web browser on your computer. In the user interface you can set up the FRITZ!Box, enable or disable functions and receive information on the FRITZ!Box and on your connections. 7.1 Opening the User Interface The FRITZ!Box user interface can be opened on any computer connected with the FRITZ!Box. 1. Start a web browser on your computer. 2. Enter fritz.box in the address line of the browser.
Overview: FRITZ!Box at a Glance The “Overview” page of the FRITZ!Box In the upper area of the window the complete product name of your FRITZ!Box is displayed, along with the currently installed version of FRITZ!OS, and its current energy consumption.
Standard View and Advanced View 7.3 Standard View and Advanced View Combinations of various settings in the “Internet” and “Home Network” areas can produce a situation in which the user interface of the FRITZ!Box can no longer be opened. Enabling the advanced view in these areas is recommended only if you have advanced network expertise. The FRITZ!Box user interface has two views: the standard view and the advanced view. Upon delivery, the FRITZ!Box interface is set to display the standard view.
Using System Functions of the FRITZ!Box 8 Using System Functions of the FRITZ!Box The FRITZ!Box offers a slew of system functions like notification services, diagnostics functions and updating services, which inform you about the activities and functional status of the FRITZ!Box and help you operate the FRITZ!Box safely and always keep it up to date. 8.
Using Energy-Saving Functions of the FRITZ!Box 8.2 Using Energy-Saving Functions of the FRITZ!Box The FRITZ!Box combines a variety of devices in one device: VDSL and ADSL modem, WLAN router, media server, answering machines, fax machine and base station for DECT cordless telephones. This means that you generally use much less power with the FRITZ!Box than you would with several separate devices.
Using Energy-Saving Functions of the FRITZ!Box Enabling Energy-Saving Mode for USB Hard Drives In the FRITZ!Box you can enable an energy-saving function for USB hard drives connected to the FRITZ!Box. When the energy-saving function is enabled, connected USB hard drives will be switched off when they are idle—as long as the hard drives support the energy-saving function. Enable the energy-saving function in the “Home Network / USB Devices” menu in the FRITZ!Box user interface.
Push Services: Notification Services of the FRITZ!Box 8.3 Push Services: Notification Services of the FRITZ!Box Push services are notification services that inform you about the activities of your FRITZ!Box and assist you in saving your passwords and FRITZ!Box settings. With the push services you can have e-mail sent to you at regular intervals informing you about the latest connections, usage and configuration of your FRITZ!Box.
Push Services: Notification Services of the FRITZ!Box Push Service Information Save settings The settings of your FRITZ!Box are saved automatically and sent to the specified e-mail address before every update and each time the factory settings are restored. Forgot password Sends you an access link to the specified e-mail address if you have forgotten your password. Current IP address Sends the IP address assigned by the Internet service provider every time the Internet connection is established.
Locking the Buttons on the FRITZ!Box 8.4 Locking the Buttons on the FRITZ!Box With the “Keylock” function in the “System / Buttons and LEDs” menu you can lock the buttons on your FRITZ!Box. Locking the keys prevents the settings for your FRITZ!Box or your home network from being changed unintentionally or without authorization. Example With the “WLAN” button the wireless network of the FRITZ!Box can be switched off at the touch of a button.
Saving and Restoring the FRITZ!Box Settings Saving Settings Backup files that are not protected by assigning a password constitute a security gap. Protect your backup file with a password to avoid security problems. A wizard is available in the FRITZ!Box user interface to assist you in saving your FRITZ!Box settings, guiding you through the process step by step. 1. Open the FRITZ!Box user interface, see page 32. 2. On the “Overview” page, select the “Wizards” menu. 3.
Update: Updating FRITZ!OS • Backup files created with a different FRITZ!Box model. If you apply settings from a backup file that was created with a FRITZ!Box of a different model, then you can restore several selected settings to your FRITZ!Box. A wizard is available in the FRITZ!Box user interface to assist you in restoring your FRITZ!Box settings, guiding you through the process step by step. 1. Open the FRITZ!Box user interface, see page 32. 2. On the “Overview” page, select the “Wizards” menu. 3.
Update: Updating FRITZ!OS Performing the Update 1. Open the FRITZ!Box user interface, see page 32. 2. On the “Overview” page, select the “Wizards” menu. 3. Start the “Update” wizard. The Wizard checks whether a FRITZ!OS update is available for your FRITZ!Box. If the Wizard finds an update, it displays the version number of the new FRITZ!OS. Click the link under the FRITZ!OS version to view information about further developments and new functions contained in the FRITZ!OS update.
Update: Updating FRITZ!OS 2. Switch to the folder for your FRITZ!Box model, then to the sub-folder “firmware”, and then to the folder named “english”. The complete model name of your FRITZ!Box is shown in the user interface on the “Overview” page and is also printed on the sticker on the underside of the housing. 3. Download the latest FRITZ!OS file for your FRITZ!Box with the file extension “.image” to the computer.
Update: Updating FRITZ!OS 6. Click the “Start Update” button. The new FRITZ!OS is transmitted to your FRITZ!Box. The update is complete when the “Info” LED stops flashing. Using the Automatic Search for Updates With the AVM service “Search for updates automatically” you will always be informed about the latest FRITZ!OS updates for your FRITZ!Box: When a new FRITZ!OS for your FRITZ!Box was found, you will be notified on the “Overview” page.
Configuring an Internet Connection in the FRITZ!Box 9 Configuring an Internet Connection in the FRITZ!Box Once you have connected the FRITZ!Box to your Internet connection, you must configure the Internet connection in the FRITZ!Box user interface so that the FRITZ!Box can establish the connection to your Internet service provider and connect to the Internet.
Internet Connection for Cable Configuring Your Internet Connection Without the Wizard Choose this method if the FRITZ!Box is connected to a DSL modem or a DSL router, or integrated into an existing network. 1. Open the FRITZ!Box user interface, see page 32. 2. Switch to the advanced view; see page 34. 3. Select the “Internet / Account Information” menu and enter your account information. 4. Click “Apply” to save your entries. In the Help of the FRITZ!Box user interface detailed instructions. 9.
Internet Connection over LAN 1: FRITZ!Box as a Router 3. Select the “Internet / Mobile Communications” menu. The “Mobile Communications” menu is not available until the UMTS/HSPA modem has been connected to the USB port of the FRITZ!Box. 4. Select the setting “Mobile connection enabled”. 5. Configure the settings for your Internet connection over the mobile communications network. In the Help of the FRITZ!Box user interface you will find detailed instructions.
Internet Connection over LAN 1: FRITZ!Box as a Router 2. Open the FRITZ!Box user interface, see page 32. 3. Select the “Internet / Account Information” menu. 4. Select the “Existing connection over LAN” entry from the “Internet service provider” drop-down list. 5. Click “Apply”. The FRITZ!Box is configured as a router and the network range is changed automatically. The FRITZ!Box, along with the connected network devices, forms its own self-contained network.
Internet Connection over Wireless LAN 9.5 Internet Connection over Wireless LAN You can use the FRITZ!Box at an already existing Internet access over a wireless LAN connection. The FRITZ!Box is connected with the radio network of the router or network. In this type of connection the FRITZ!Box works as an independent router to provide a network with its own network address range. The radio network of the router or network must fulfill the following requirements: • The frequency range is the 2.4-GHz band.
Connecting Telephones and Other Terminal Devices 10 Connecting Telephones and Other Terminal Devices This chapter describes how to connect telephones, fax machines, answering machines and telephone systems (PBXs) to the FRITZ!Box. Connecting an Analog Telephone or Terminal Device WLAN Fixed Line Internet Power/DSLL Info DECT 10.1 N WLA WPS Power DSL/TTEL 1. N S0 F ON N 2 FO ONN 1 FO FFO LLAANN44 LAN 3 L AN 2 N 1 LA LLAAN Connect the terminal device to the “FON 1” or “FON 2” port.
Registering FRITZ!Fon and Other Cordless (DECT) Telephones Fixed Line Internet Power/DSLL DECT WLAN Info N WLA WPS Power DSL/TTEL 2. FON 2 FON 1 FON S0 LANN44 LAN 3 LAN 2 LAN 1 Configure the ISDN telephone in the FRITZ!Box; see page 57. Connecting Multiple ISDN Telephones With S0 bus cabling you can connect up to eight ISDN telephones to the FRITZ!Box. Please note for configuration: 10.
Registering an iPhone or Android Smartphone 10 s Registration WLAN DEC T WPS 3. Info WLAN Internet Fixed Line Power / DSL DECT If you are asked for the PIN of the base station, enter the PIN pin of the FRITZ!Box. The preset value is 0000. The PIN is listed in the FRITZ!Box user interface under “DECT / Base Station”. The cordless telephone is registered with the FRITZ!Box. 4. 10.4 Configure the cordless telephone in the FRITZ!Box; see page 57.
Registering an iPhone or Android Smartphone Registering a Smartphone with FRITZ!Box 1. Establish a wireless LAN connection to the FRITZ!Box on your smartphone; see page 28. 2. Install FRITZ!App Fon on your smartphone. FRITZ!App Fon is available at the Google Play Store and in the Apple App Store. 3. Start the FRITZ!App Fon.
Connecting an IP Telephone 10.5 Connecting an IP Telephone IP telephones are telephones for making calls over the Internet and other computer networks. If your FRITZ!Box 7490 is connected with a landline, you can use the connected IP telephone to make calls over the landline network as well. Connecting via LAN or Wireless LAN 1. Connect the IP telephone to the FRITZ!Box using a LAN cable or wireless LAN.
Configuring the FRITZ!Box for Telephone Calls 11 Configuring the FRITZ!Box for Telephone Calls This chapter describes how to configure your FRITZ!Box for making telephone calls. 11.1 Configuring Your Telephone Numbers Configure the following telephone numbers in the FRITZ!Box using the wizard: • All Internet telephone numbers that are not configured in the FRITZ!Box automatically by the provider. • Landline telephone numbers you would like to assign to telephones and other terminal devices.
Configuring Telephones and Other Terminal Devices in the FRITZ!Box 11.2 Configuring Telephones and Other Terminal Devices in the FRITZ!Box Configure your telephones and other terminal devices in the FRITZ!Box. To do this, for each terminal device define: • Internal name, which will be displayed in the call list of the FRITZ!Box. • Telephone number the terminal device uses for outgoing calls to the public telephone network.
Password Protection: Using FRITZ!Box Safely 12 Password Protection: Using FRITZ!Box Safely Password protection for access to the user interface is a security feature of your FRITZ!Box. This section describes how to use a password for the FRITZ!Box user interface and why you should use password protection. Additional security information on using the FRITZ!Box, see the AVM web site at en.avm.de/guide/security. 12.
Using a FRITZ!Box Password Password Tips • Select a password with at least eight characters, which includes capitals and lower-case letters as well as numerals and special characters. See “Characters for Passwords” in the Help of the FRITZ!Box user interface for more information about which characters you’re allowed to use. • Be sure to keep your passwords in a safe place! – Use the “Forgot password” push service, see Push Services: Notification Services of the FRITZ!Box from page 38.
Using a FRITZ!Box Password 4. Save your changes by clicking “Apply”. You will be directed to the welcome screen of your FRITZ!Box. 5. Enter your user name to log in to the user interface of your FRITZ!Box. Password protection is enabled in your FRITZ!Box. With the FRITZ!Box password it is not possible to access the FRITZ!Box from the Internet. For users who require access to the FRITZ!Box via Internet, you must also set up an account as a FRITZ!Box user; see page 61.
Using FRITZ!Box Users 12.3 Using FRITZ!Box Users If you would like to access your FRITZ!Box from the Internet, you have to configure password-protected login with FRITZ!Box user accounts. Also use this login method if multiple users with different rights are to have access to the FRITZ!Box. A FRITZ!Box user reaches the user interface of the FRITZ!Box by entering her or his personal password. There she or he can view and change those contents or settings for which she or he has been granted access rights.
Using FRITZ!Box Users 5. In the “Rights” area, specify for each FRITZ!Box user which FRITZ!Box contents she or he is allowed to use. Make sure that those users who are allowed to configure settings on the FRITZ!Box are assigned at least the right “FRITZ!Box settings”. For more information on rights, see the section from page 64. 6. Save your entries by clicking “OK”. The FRITZ!Box user account has been set up.
Using FRITZ!Box Users 3. Enter a name, a valid e-mail address and a password for the new user. For more information on the characters you may use for the password, see the Help in the FRITZ!Box user interface. 4. Specify whether or not the new FRITZ!Box user is allowed to access from the Internet the FRITZ!Box contents for which she or he has access rights. Keep in mind that a corresponding service must also be enabled in the FRITZ!Box for Internet access.
Using FRITZ!Box Users Rights for FRITZ!Box Users The rights define which contents of the FRITZ!Box a FRITZ!Box user is allowed to access. The rights checked in the user account are granted to the FRITZ!Box user for access from the home network and—if enabled—also for access from the Internet; see page 65. You can grant the following rights: • FRITZ!Box settings A user with these rights can open the fritz.box or myfritz.box view of the FRITZ!Box user interface.
Using FRITZ!Box Users • VPN A user with this right can use her or his mobile device or computer to establish a safe VPN connection to the FRITZ!Box and its home network. Accessing the FRITZ!Box from the Internet To be able to access your FRITZ!Box from the Internet, the following conditions must be fulfilled: • You have set up an account with the MyFRITZ! service; see page 71. Your FRITZ!Box is registered with this MyFRITZ! account.
Using FRITZ!Box Users • If you set up a FRITZ!Box user account for every member of the family, with at least the rights to access voice messages, faxes, FRITZ!App Fon and the call list, the entire family can listen to the answering machine or view the call list even when they’re away from home. • With a FRITZ!Box user account that has only the right to access a certain area of the NAS you can grant your friends Internet access to your latest vacation pictures, for instance.
Using FRITZ!Box Users Quick Access to Your Own User Account In the upper navigation bar of the FRITZ!Box is the name of the FRITZ!Box user account with which the user is currently logged in to the user interface. Click the blue triangle to control basic functions of this user account: • Changing the e-mail address Select the “Change e-mail address” entry to assign a different e-mail address to the current user account.
Forgot Password—What to Do 1. In the FRITZ!Box user interface, open the “System / FRITZ!Box Users / User” menu. 2. Click the “Edit” button for the user account to be disabled. 3. In the “User” area, remove the check mark in front of the “User account enabled” option. 4. Apply the change by clicking “OK”. The user account has been disabled. 12.
Mode “No login” 1. Disconnect the FRITZ!Box from the power supply. 2. Reconnect to the power supply after about five seconds and wait until the “Power / DSL” LED lights up. In the first ten minutes after restarting you can restore the factory settings to the FRITZ!Box. 3. Open the browser on a computer connected with the FRITZ!Box by LAN or wireless LAN and enter fritz.box in the address field. 4.
MyFRITZ!: Accessing the FRITZ!Box from Anywhere 13 MyFRITZ!: Accessing the FRITZ!Box from Anywhere MyFRITZ! is a web service by AVM, with which you can access your FRITZ!Box from anywhere in the world over the Internet, just as if you were at home. This chapter describes what MyFRITZ! does and how to configure MyFRITZ!. Why MyFRITZ!? Using an active Internet connection on any computer, tablet or smartphone, with MyFRITZ! accessing your FRITZ!Box from anywhere is safe and simple.
Configuring MyFRITZ! 13.1 Configuring MyFRITZ! The MyFRITZ! service can be used only with a MyFRITZ! account. Register your MyFRITZ! with this FRITZ!Box account. Once your FRITZ!Box is registered with your MyFRITZ! account, the FRITZ!Box determines the public IP address each time it is changed and conveys it to the MyFRITZ!. The FRITZ!Box can be reached at this IP address in the Internet from anywhere in the world. When you log in to MyFRITZ! you will be forwarded to the FRITZ!Box using the IP address.
Using MyFRITZ! 6. If you do not have a FRITZ!Box user account yet, you will be prompted to set one up by assigning a user name and an additional password. If you already have a FRITZ!Box user account, follow the instructions in the FRITZ!Box user interface. For security reasons access to the FRITZ!Box from the Internet is possible only for users with a FRITZ!Box user account. 7. You receive an e-mail from MyFRITZ! containing a registration link.
Using MyFRITZ! 2. Log in with your e-mail address and your MyFRITZ! password. 3. Click the “To My FRITZ!Box” button. 4. To register with your FRITZ!Box, enter the data of your FRITZ!Box user account. You will be directed to the MyFRITZ! page of your FRITZ!Box. Here you have access to the FRITZ!Box contents that are released for sharing in your FRITZ!Box user account; see page 64.
Using MyFRITZ! Here you have access to the FRITZ!Box contents that are released for sharing in your FRITZ!Box user account; see page 64. MyFRITZ! in the Home Network MyFRITZ! can also be used over the web browser of any device in the home network that is connected with the FRITZ!Box. 1. Enter myfritz.box in the address field of your browser. 2. Log in to your FRITZ!Box.
Security with MyFRITZ! 13.3 Security with MyFRITZ! For the following MyFRITZ! activities the HTTPS security protocol is used: • • • setting up a MyFRITZ! account with myfritz.net • accessing the user interface of the FRITZ!Box over myfritz.net and over the MyFRITZ!App. registration of the FRITZ!Box with the MyFRITZ! account accessing the MyFRITZ! page of your FRITZ!Box over myfritz.net The FRITZ!Box generates its own HTTPS certificate.
FRITZ!Box as an Internet Router 14 FRITZ!Box as an Internet Router The FRITZ!Box connects computers in your home network with the Internet. This chapter explains the possibilities presented by using the FRITZ!Box as an Internet router and how to take advantage of them. 14.1 Parental Control: Access Profiles for Internet Use Using access profiles you can control the use of the Internet by devices in your network.
Parental Control: Access Profiles for Internet Use • Network devices that log in to the FRITZ!Box guest network are automatically assigned the “Guest” access profile. This is the only access profile possible in the guest network. Preconfigured Access Profiles In the FRITZ!Box there are four preconfigured access profiles available for use. The “Standard” Access Profile FRITZ!Box 7490 Property Description Limitations In the factory settings the “Standard” profile is allowed to do everything.
Parental Control: Access Profiles for Internet Use The “Guest” Access Profile Property Description Limitations The profile has the following settings configured upon delivery: • There are not time restrictions. • HTTPS queries are permitted. • Surfing and mail are allowed. Web access is blocked for all other network applications. Changeable The “Guest” profile can be changed.
Parental Control: Access Profiles for Internet Use Online Time The online time is defined as follows: Setting Description Period On a timetable you define at what times the Internet connection may be used. Online time For each day of the week you define how long the Internet is allowed to be used. Shared budget You decide and define whether all network devices that use the same access profile must share this online time limit.
Parental Control: Access Profiles for Internet Use • Permit web sites with a whitelist: – The whitelist is a filter list that should be used when access should be limited to just a few web sites. – Access to web pages entered in the whitelist is permitted. – When a whitelist is used, only those web sites included in the list can be opened, and no others.
Parental Control: Access Profiles for Internet Use Configuring Parental Control Requirements The “Internet / Filters” menu is available only if you have set up the Internet connection in the FRITZ!Box and already established an Internet connection. Limitations The “Internet / Filters” menu is not available if you have configured the FRITZ!Box as IP client. In this case, use the corresponding functions of the router whose Internet connection is being shared.
Parental Control: Access Profiles for Internet Use Limitations The “Internet / Filters” menu is not available if you have configured the FRITZ!Box. In this case, use the corresponding functions of the router whose Internet connection is being shared. Configuring an Access Profile 1. Open the FRITZ!Box user interface, see page 32. 2. Select the “Internet / Filters” menu. 3. Select the “Access Profiles” tab. 4. Click 5. Configure the settings for the access profile in the“New Access Profile” window.
AVM FRITZ!Box Parental Control for Windows Users Adding Network Applications Requirements The “Internet / Filters” menu is available only if you have set up the Internet connection in the FRITZ!Box and already established an Internet connection. Limitations The “Internet / Filters” menu is not available if you have configured the FRITZ!Box as an IP client. In this case, use the corresponding functions of the router whose Internet connection is being shared. Adding a Network Application 1.
Port Forwarding: Making Computers Accessible from the Internet • The AVM FRITZ!Box parental control is installed on the computer as a service. The service must be enabled at all times. If it is not enabled, the FRITZ!Box will not detect the user accounts. Windows users that are not detected are treated like user accounts without any parental controls. Downloading AVM FRITZ!Box Parental Controls from the AVM Web Sites 1. Enter the address ftp://ftp.avm.de/fritz.box in your web browser. 2.
Port Forwarding: Making Computers Accessible from the Internet Port Forwarding Using port forwarding you allow incoming connections from the Internet. By releasing certain ports for incoming connections, you grant controlled access to the computers in your network to other Internet users. The following port forwarding methods are possible in the FRITZ!Box: PING IPv4: The FRITZ!Box responds to ping inquiries from the Internet addressed to the IPv4 address of the FRITZ!Box.
Port Forwarding: Making Computers Accessible from the Internet Exposed host IPv4: (Open firewall completely) Within IPv4 networks you can open the firewall completely for one computer. This computer is then no longer protected by the FRITZ!Box firewall. If individual ports are already open for other computers, then data packets for these ports are not forwarded to the exposed host, but to the other computer instead. IPv6: Within IPv6 networks you can open the firewall completely for each computer.
Port Forwarding: Making Computers Accessible from the Internet Can Always Be Reached, Even When the IP Address Changes Every time the Internet connection is interrupted, the Internet service provider re-assigns the IP address. The IP address may change in the process. Therefore it is a good idea to use MyFRITZ! or dynamic DNS so that the IP address can always be reached under the same name. For more information about MyFRITZ!, see the chapter MyFRITZ!: Accessing the FRITZ!Box from Anywhere on page 70.
Dynamic DNS: Name instead of IP Address 14.3 Dynamic DNS: Name instead of IP Address Dynamic DNS is an Internet service that makes it possible for the FRITZ!Box to remain accessible from the Internet at all times under a fixed name, even though the public IP address changes. Dynamic DNS can be used as an alternative to MyFRITZ!. Both services can be used in parallel. You must register with a dynamic DNS provider to use this service.
Access from the Internet via HTTPS, FTP and FTPS • Access to storage: Every user who would like to access the storage of the FRITZ!Box externally from the Internet requires a FRITZ!Box user account with the right to access from the Internet access to the contents on the storage media. • The protocols for the desired access must be enabled in the FRITZ!Box. HTTPS, FTP and FTPS The protocols HTTPS, FTP and FTPS are used for access over the Internet.
Prioritization: Right of Way for Internet Access 14.5 Prioritization: Right of Way for Internet Access Prioritization is a function you can use to specify that network applications and network devices be treated with higher or lower priority when they access the Internet connection. For example, you may wish to ensure that applications like Internet telephony, IPTV and video on demand are always treated with higher priority than other applications.
Prioritization: Right of Way for Internet Access Prioritized Applications This category is suitable for applications that require a fast reaction time (for example, company access, terminal applications, games). • For network applications prioritized in this category, 90% of the FRITZ!Box’s upload bandwidth is available, as long as no application from the “Real-time applications” category requires bandwidth.
Prioritization: Right of Way for Internet Access Prioritization Method in the FRITZ!Box The following techniques are used in the FRITZ!Box to send data packets according to their prioritization: • Change in the order in which packets are sent to the Internet (upstream direction) The order of the packets the FRITZ!Box receives from the Internet (downstream direction) cannot be changed. • Discard low-priority packets in order to ensure the transmission of higher-priority packets.
VPN: Remote Access to the Home Network 14.6 VPN: Remote Access to the Home Network Via a VPN (Virtual Private Network) a secure remote access to the network of the FRITZ!Box can be established. VPN in the FRITZ!Box IPSec VPN in the FRITZ!Box is based on the IPSec standard. Computer-LAN Computer-LAN linkup: VPN connections can be configured for individual remote computers. LAN-LAN LAN-LAN linkup: VPN connections can be configured for remote networks.
VPN: Remote Access to the Home Network Supplementary Software for VPN All of the information required for a VPN is saved in a configuration file. The terminals involved in any VPN must receive this file. Individual computers that are networked over a VPN require a VPN client. • The “Configure FRITZ!Box VPN Connection” Wizard AVM provides the “Configure FRITZ!Box VPN Connection” software for creating configuration files. This program is a Wizard that takes you step by step through the VPN configuration.
Freely Selectable DNS Servers 14.7 Freely Selectable DNS Servers DNS servers are preset in the FRITZ!Box for IPv4 and IPv6. These are the DNS servers assigned by the Internet service provider. For both IPv4 and IPv6, the preset DNS server can be replaced by a free DNS server. Free DNS servers include, for instance, OpenDNS and Google DNS. Here is how to change the DNS server entry: The “DNSv6” page is displayed only if you enabled IPv6 support for the FRITZ!Box on the “IPv6” page. 14.8 1.
IPv6: The New Internet Protocol Support with the FRITZ!Box The FRITZ!Box supports DNSSEC queries over UDP. The FRITZ!Box has a DNS proxy. The computers in the home network use the FRITZ!Box as a DNS server. The FRITZ!Box forwards DNSSEC queries from the home network to the Internet. The FRITZ!Box forwards DNSSEC responses from the Internet to the home network. The DNSSEC information must be validated on the computer in the home network. For this DNSSEC must be supported in the operating system. 14.
IPv6: The New Internet Protocol • For guest access to the wireless LAN, the home network and wireless guests are separated by IPv6 subnetworks.
Mobile Network: Replacing Faulty DSL 14.10 Mobile Network: Replacing Faulty DSL Internet access over the mobile telephone network can be set up so that the mobile telephone connection is established automatically whenever the DSL connection fails. This guarantees Internet access even when the DSL connection is fails. A USB modem for mobile Internet access (UMTS/HSPA) and a SIM card from a mobile communications provider are required for this.
LISP: FRITZ!Box as a LISP Router 14.11 LISP: FRITZ!Box as a LISP Router LISP is a routing architecture which separates information about location and identity. There are two IP addresses: one for the location and one for the identity. The FRITZ!Box can be configured as a LISP router. • • • This chapter address system administrators. • This chapter includes instructions on how to configure the FRITZ!Box as a LISP router. It presents a short introduction to LISP.
LISP: FRITZ!Box as a LISP Router Properties of RLOC and EID RLOC EID • specifies the location where the addressed network (network segment or network device) is located • is assigned by the Internet service provider • is a public IP address • is contained in the external header of the LISP packet • can be an IPv4 address • can be an IPv6 address • identifies a network (network segment or network device) • is assigned by the LISP provider • is contained in the internal header of the LISP
LISP: FRITZ!Box as a LISP Router PETR (Proxy ETR) A PETR (Proxy ETR) is required for communication between LISP sites and non-LISP sites. On the LISP site it works like a LISP router; on the non-LISP site it works like a native IP router. PITR (PROXY ITR) A PITR (Proxy ETR) is required for communication between LISP sites and non-LISP sites. On the LISP site it works like a LISP router; on the non-LISP site it works like a native IP router. xTR xTR is what we call a component that is both ETR and ITR.
LISP: FRITZ!Box as a LISP Router Configuring FRITZ!Box as a LISP Router FRITZ!Box as a LISP Router • • The FRITZ!Box can be configured as a LISP router. As a LISP router is the FRITZ!Box is an xTR (ETR and ITR). Preparations You need a LISP provider. Register with a LISP provider. All of the information you need to configure the FRITZ!Box as a LISP router is supplied by the LISP provider. Configuring a LISP Router FRITZ!Box 7490 1. Open the FRITZ!Box user interface, see page 32. 2.
FRITZ!Box as a WLAN Access Point 15 FRITZ!Box as a WLAN Access Point The FRITZ!Box is a wireless access point for wireless devices like notebooks, tablets or smartphones. The FRITZ!Box can establish wireless LAN connections compliant with the fast wireless AC standard and the wireless N standard in two frequency bands at the same time. The FRITZ!Box is preconfigured with an encryption method from today’s safest method WPA2. This encryption method is supported by most of the latest wireless devices.
Extending a Wireless Radio Network Switching Wireless LAN On and Off You can switch the wireless radio network of the FRITZ!Box on and off at any time, even when the device is hibernating. • Press the “WLAN” button on the FRITZ!Box briefly or • Switch on the wireless LAN radio network using a connected telephone wireless LAN on r96s1s wireless LAN off r96s0s 15.2 Extending a Wireless Radio Network The range of a wireless radio network is not fixed.
Wireless LAN—Getting Technical Using an Existing FRITZ!Box as a Repeater You can extend the wireless LAN radio network of your FRITZ!Box with an additional FRITZ!Box you already have. To extend your wireless LAN, configure the repeater function in this device. You can configure a FRITZ!Box as a repeater by working through the following steps: 1. Open the FRITZ!Box user interface, see page 32. 2. Enable the advanced view. 3.
Wireless LAN—Getting Technical IEEE 802.11a Because this standard works exclusively in the seldom used 5-GHz range, it offers the opportunity to transmit data relatively free of interference from external influences. Wireless devices that support 802.11a are much less common than devices that work in accordance with the 802.11b/g standard. IEEE 802.11b With a maximum throughput rate of 11 Mbit/s, this is the oldest wireless standard.
Wireless LAN—Getting Technical IEEE 802.11ac This standard provides for transmission rates in the gigabit range. The high throughput rates are achieved using wider wireless LAN channels, deeper modulation and more MIMO streams. Channels can be 20, 40, or 80 MHz wide. Modulations of up to 8 bit/256QAM are applied. The standard uses only the 5-GHz range, which reduces interference with other users. The standard is compatible with the 802.11a and 802.
Wireless LAN—Getting Technical band. This means the FRITZ!Box can be implemented as an especially flexible wireless access point for the various wireless devices and applications in your network. • Set the standards of the two wireless radio networks in the FRITZ!Box such that they are compatible with all of the wireless LAN devices used in the wireless network.
Wireless LAN—Getting Technical 11n, 11a In your radio network there are wireless LAN devices that are compatible with one or both of the following standards: • • 802.11n 802.11a Set the wireless LAN standard for the 5-GHz frequency band to: 802.11n+a 11ac In your radio network there are wireless devices that support the 802.11ac standard: Set the wireless LAN standard for the 5-GHz frequency band to: 802.
Wireless LAN—Getting Technical FRITZ!Box supports the AES encryption procedure as part of the WPA2 mechanism, and the TKIP encryption procedure as part of the WPA mechanism. This means that the FRITZ!Box can be used in combination with any wireless devices that also support WPA2 with AES or WPA with TKIP. Frequency Ranges Wireless LAN uses the frequency ranges at 2.4 GHz and 5 GHz for transmission.
Wireless LAN—Getting Technical Wireless Auto Channel With the wireless auto channel function, the FRITZ!Box automatically searches for the channel subject to the least interference. This process takes into consideration interference from radio networks in the vicinity (wireless access points) and potential sources of interference (for instance video bridges, baby monitors, microwave ovens).
Wireless LAN—Getting Technical 2.4 GHz and 5 GHz The FRITZ!Box works in the wireless network in the 2.4-GHz range and parallel in the 5-GHz range. Both frequency ranges can be used simultaneously for wireless LAN connections. This means you always have the optimum data connection at your disposal: For applications that rely on a steady, high throughput rate (“streaming”), use the 5-GHz frequency band.
Wireless LAN—Getting Technical Increasing bandwidths also increases the probability of interference by wireless networks in the vicinity. Large bandwidths reduce the frequency range available to other wireless networks in the vicinity. Allocation of the Wireless LAN Channels in the 2.4-GHz Range Channel Frequency (GHz) Channel Frequency (GHz) 1 2.412 8 2.447 2 2.417 9 2.452 3 2.422 10 2.457 4 2.427 11 2.462 5 2.432 12 2.467 6 2.437 13 2.472 7 2.
FRITZ!Box as a Telephone System 16 FRITZ!Box as a Telephone System This chapter describes how to use the FRITZ!Box as a telephone system. 16.1 Telephone Book How Can I Use the Telephone Book? • Quick-dial: With quick-dial numbers you assign in the telephone book entries you can make calls on all telephones. • FRITZ!Fon: The telephone book is available in the menu of your FRITZ!Fon cordless telephones. You can set up a separate telephone book for each FRITZ!Fon.
Telephone Book 5. Under “Telephone Assignment”, select all FRITZ!Fon cordless telephones on which you would like to use the telephone book. 6. Save with “OK”. The telephone book is available in the menu of the FRITZ!Fon cordless telephones. Configuring Online Telephone Books (e.g. Google Contacts) 1. Open the FRITZ!Box user interface, see page 32. 2. Select “Telephony / Telephone Book”. 3. Click the “New Telephone Book” link. 4. Select “Use the telephone book of an e-mail account”. 5.
Call List Configuring Click to Dial 1. Open the FRITZ!Box user interface, see page 32. 2. Select “Telephony / Telephone Book / Click to Dial”. 3. Enable click to dial and select a telephone. 4. Save with “OK”. You can use click to dial. In the Help of the FRITZ!Box user interface detailed instructions. 16.2 you can find Call List The call list of the FRITZ!Box contains your telephone calls and calls you missed (missed calls).
Answering Machine 16.3 Answering Machine You can use the FRITZ!Box as an answering machine without connecting any additional devices. Features • If desired you can receive any new messages automatically by e-mail. • If you have more than one telephone number, you can configure up to five different answering machines. • Schedule: Specify when the answering machine is on and off on the individual days of the week. • Remote playback: Check the answering machine from on the go.
Answering Machine Answering Machine Keys Answering machine 3 ss602 Answering machine 4 ss603 Answering machine 5 ss604 2. Pick up the handset. 3. Follow the voice menu. Or you can press a key right away; see the section Voice Menu on page 119. Operating the Answering Machine on FRITZ!Fon You can operate the answering machine in the menu of your FRITZ!Fon cordless telephones. For comprehensive instructions, see the current FRITZ!Fon manual on en.avm.de/service/manuals/fritzfon.
Answering Machine Voice Menu Main menu 1 Play back messages If no messages are available, you will hear two short audio signals and return to the main menu.
Fax Function 16.4 Fax Function With the FRITZ!Box you can send and receive faxes without a fax machine. The FRITZ!Box can be configured to forward received faxes by e-mail. Configuring the Fax Function 1. Open the FRITZ!Box user interface, see page 32. 2. Select “Telephony / Telephony Devices”. 3. Click “Configure New Device”. 4. Under “Integrated in the FRITZ!Box”, select the “Fax function” option and confirm by clicking “Next”. 5.
Fax Function Configuring Automatic Fax Detection Here is how automatic fax detection works: The answering machine checks each incoming call to see whether it is a telephone call or a fax. Callers can leave a message, and faxes are forwarded to the fax function. Here is how to enable automatic fax detection: 1. Open the FRITZ!Box user interface, see page 32. 2. Set up the fax function; see page 120. 3. Select “Telephony / Telephony Devices”. 4.
Call Diversion 8. File attachment: If you use the Internet browser Google Chrome or Mozilla Firefox, you can attach an image to the fax. Select an image by clicking the “Browse...” button. The image must be available as a graphic file in JPG or PNG format. Other files like PDF or Word files cannot be sent by fax. If the image is smaller than A4 format, it will be centered on the sent fax. If the image is larger than A4 format, it will be reduced in size. 9. Click “Send”. Fax sending begins. 16.
Dialing Rules for Outgoing Calls Configuring Call Diversion 1. Open the FRITZ!Box user interface, see page 32. 2. Select the “Telephony / Call Handling / Call Diversion” menu. 3. Click “New Call Diversion”. 4. Define which calls should be diverted. In the Help of the FRITZ!Box user interface find detailed instructions. 16.6 you can 5. Define the destination and the type of call diversion. 6. Click “OK” to save the settings.
Blocking Telephone Numbers and Callers 16.7 Blocking Telephone Numbers and Callers In the FRITZ!Box you can block telephone numbers for outgoing and for incoming calls. How Does a Call Block Work? You can configure various kinds of call blocks: Call Block for Function Outgoing calls The blocked telephone number can no longer be called from the FRITZ!Box. Ranges of telephone numbers, for instance, mobile networks, can also be blocked.
Do Not Disturb 16.8 Do Not Disturb Do Not Disturb for All Telephones In the FRITZ!Box night service you can set up a Do Not Disturb function so that none of the connected telephones and other terminal devices signal calls. Do Not Disturb is switched on and off daily at previously specified times. When Do Not Disturb is switched on, connected telephones and terminal devices will work in the following way: • Telephones will not ring. This is not the case for IP telephones.
Alarm 16.9 Alarm When you configure an alarm, your telephone rings at the specified time. Configuring the Alarm 1. Open the FRITZ!Box user interface, see page 32. 2. Select “Telephony / Alarm”. 3. Enable the alarm and enter a time. 4. Select which telephone should ring at the specified time. 5. Define here whether the alarm should be repeated. 6. Click “Apply” to save the settings. The alarm is configured and enabled. 16.
Baby Monitor 5. Enter an external telephone number, an internal telephone number or ss9 for an internal broadcast call. The internal numbers of the telephones you have connected are listed in telephone book of the FRITZ!Box user interface. 6. Press “OK”. 7. Select “Activation” and “OK”. 8. Set the sensitivity. The baby monitor is enabled. The display of your FRITZ!Fon shows the text “Baby monitor enabled”. To disable the baby monitor, exit the “Baby Monitor Enabled” menu.
Making Telephone Calls with Convenience Functions Sensitivity Keys Highest s41sr s42sr ... s48sr Lowest To disable the baby monitor, hang up the handset. 16.11 Making Telephone Calls with Convenience Functions This chapter describes convenience functions you can use when placing and making telephone calls, for instance internal calling, forwarding calls, alternating between calls and three-party conferences.
Making Telephone Calls with Convenience Functions Transferring: Forwarding Calls Internally Here is how to transfer a call to a different telephone: 1. While you are conducting the call, press the Hold button R. The call is on hold. 2. Enter an internal number. The internal numbers of the telephones you have connected are listed in telephone book of the FRITZ!Box user interface. When the called party accepts the call the second call is connected. 3.
Making Telephone Calls with Convenience Functions Calling Line Identification Restriction (CLIR) Once for FON 1 or FON 2 For outgoing calls on the lines “FON 1” and “FON 2” you can restrict identification of your calling line once (for one call). 1. Press the keys s31r on the telephone. 2. Enter the telephone number you would like to call. 3. Pick up the handset. For this call your telephone number will not be transmitted to the other caller.
Making Telephone Calls with Convenience Functions Function Keys Ending call 2 and switching to call 1 R1 Switching between call 1 and call 2 (al- R2 ternating) Making a three-party conference call R3 Accepting or Rejecting Waiting Calls on FON 1 and FON 2 Requirements • The “Call waiting” feature must be enabled for the individual telephone in the FRITZ!Box. The telephone settings can be edited in the user interface of the FRITZ!Box under “Telephony / Telephony Devices”.
Making Telephone Calls with Convenience Functions Holding, Consultation and Alternating You can put a call on hold in order to call another party and establish a second call (consultation). You can alternate between the two calls as often as you like. Holding and Consultation 1. While you are conducting the call, press the Hold button R on the telephone. Call 1 is on hold. 2. Enter an internal or external telephone number. When the called party accepts the call the second call is connected.
Making Telephone Calls with Convenience Functions Using Keypad Shortcuts Keyboard shortcuts are commands consisting of multiple characters and numerals. They can be used to control services and features in the telephone network. For information about which keypad sequences you can use, contact your carrier. 1. Press the keys sr< Seq>. stands for a keyboard sequence.
Making Telephone Calls with Convenience Functions One-Time Explicit Transfer on the ISDN Line If ECT is not activated for your ISDN line, you can transfer a call to a second external party over the FRITZ!Box. Attention: While the two parties are talking with each other, your ISDN line is busy, and the charges contracted for your line incurred for two separate calls. Transferring Calls to an External Party 1. Press the keys s32r on the telephone and enter the telephone number of the first party. 2.
Making Telephone Calls with Convenience Functions Enabling Call-Back 1. Press the 5 key. You have 20 seconds for this. Wait for the second-long positive acknowledgment tone. 2. Hang up the handset. Call-back is enabled. Deleting Call-Back 1. On the same telephone, press the keys Rr37r. 2. Pick up the handset and hang it up again. If you are awaiting multiple return calls, the oldest call-back will be deleted.
FRITZ!Box as a DECT Base Station 17 FRITZ!Box as a DECT Base Station The FRITZ!Box is equipped with a DECT base station, on which you can register and configure a total of up to six cordless telephones. 17.1 Paging Cordless Telephones If you have misplaced a cordless telephone, you can find it by using a paging call: 17.2 1. Briefly press the “DECT” button of the FRITZ!Box. All cordless telephones registered on the FRITZ!Box will ring. 2.
Enabling DECT Eco How Does DECT Eco Work? When all registered cordless telephones are in standby operation, the DECT radio transmission of the FRITZ!Box and the telephones is switched off. When a call arrives or you press a key on a cordless telephone, the FRITZ!Box switches DECT radio transmission back on. Standby operation of a cordless telephone: • • • You are not making any calls. You are not using any other telephone functions. You are not pressing any keys on the telephone.
FRITZ!Box Connects Network Devices 18 FRITZ!Box Connects Network Devices All network devices connected with the FRITZ!Box comprise a network. Network devices include, for instance, computers, game consoles and smartphones. The devices can be connected with the FRITZ!Box by cable or wirelessly. This chapter describes the network settings in the FRITZ!Box and how you can change them. You will also learn how you can change the IP settings for the computer in the most common operating systems. 18.
Network Settings in the FRITZ!Box The columns have the following meanings: Icon A green LED before the device name indicates that a device is actively connected with the FRITZ!Box, but not using the Internet connection at this time. A green-blue globe indicates that the device is currently using the Internet connection. Name This column displays the name under which the user or the network device is known to the FRITZ!Box.
Network Settings in the FRITZ!Box When this setting is enabled for a network device, the DHCP server of the FRITZ!Box will assign the same IP address to this device each time the connection is established. Starting the Computer—Wake on LAN Wake on LAN is a function that allows a computer in the local network to be started when it is accessed from the Internet.
Network Settings in the FRITZ!Box The IP address and the corresponding subnet mask yield the following values: Network address of the subnet 192.168.178.0 Entire IPv4 address range for the computers 192.168.178.2 – 192.168.178.254 The following IPv4 addresses cannot be assigned because they are reserved for certain purposes: This IP address is used by the FRITZ!Box itself 192.168.178.1 This IP address is the broadcast ad192.168.178.
Network Settings in the FRITZ!Box • Fixed IPv4 addresses are registered in the network settings of the computer, and you do not want to or are not permitted to change these addresses. • You want to connect the FRITZ!Box to the local IPv4 network in order to make the FRITZ!Box features available to all of the computers in the IPv4 network. Reserved IP Addresses The entire IP network 192.168.180.0 in the FRITZ!Box is reserved for internal purposes.
Network Settings in the FRITZ!Box Fixed IPv4 Addresses When the DHCP Server Is Enabled If you would like to configure fixed IPv4 addresses on individual computers connected with the FRITZ!Box despite the enabled DHCP server, please note the following: • The IPv4 addresses must be from the IPv4 network of the FRITZ!Box. • The IPv4 addresses may not come from the address range of the DHCP server. • Each IPv4 address can be assigned only once. Disabling the DHCP Server You can disable the DHCP server.
Network Settings in the FRITZ!Box Note that changes to the network settings in the FRITZ!Box may make it necessary to adjust the network settings of your computers so that you can continue to access the FRITZ!Box user interface. IPv6 Settings in the FRITZ!Box The following settings options for IPv6 are found in the advanced view in the “Home Network / Network” menu on the “Network Settings” page.
Obtaining an IP Address Automatically The DHCPv6 server assigns the network devices their IPv6 settings. These settings are used instead of the data in the router advertisement messages. The DNS server, IPv6 prefixes or IPv6 addresses can all be assigned by DHCPv6. Define which IPv6 settings should be assigned by the DHCPv6 server. UPnP Settings The Universal Plug-and-Play (UPnP) service included in your FRITZ!Box provides status information about the FRITZ!Box to all connected computers.
Obtaining an IP Address Automatically Obtaining an IP Address Automatically in Windows 1. In Windows 7 and Vista, click “Start”, enter “ncpa.cpl” in the search line of the Start menu, and press Enter. In Windows 8 and 8.1, press the Windows key and the Q key at the same time. The search menu for apps appears. Enter “ncpa.cpl” in the search field and press Enter. Entering “ncpa.cpl” in Windows 8 FRITZ!Box 7490 2.
Obtaining an IP Address Automatically 6. Click “OK” to save the settings. 7. Enable the options “Obtain an IP address automatically” and “Obtain DNS server address automatically” for the Internet protocol version 6 (TCP/IPv6) as well. The computer receives an IP address from the FRITZ!Box. Obtaining an IP Address Automatically in Mac OS X 1. Select the “System Preferences...” in the Apple menu. 2. In the “System Preferences” window, click the “Network” icon. 3.
Connecting USB Devices to the FRITZ!Box 19 Connecting USB Devices to the FRITZ!Box The FRITZ!Box has two USB ports to which you can connect various USB devices. All network devices in the FRITZ!Box home network can use these USB devices jointly and simultaneously. This chapter describes how to share a printer in the network, which USB devices can be used in your FRITZ!Box home network, and how to use these devices safely. 19.
Using USB Devices Safely • You can connect a USB hub to the FRITZ!Box and use up to four USB devices at this hub. You can use USB hubs with or without a separate power supply. We recommend deploying a USB hub with its own power supply if the USB devices to be connected exceed a total current consumption of 900 mA; see Power Supply for USB Devices on page 148. • 19.3 You can connect a USB modem.
Accessing USB Memory • configure various FRITZ!Box users. You can configure a password for each FRITZ!Box user and then specify which connected USB storage media each user is allowed to access. A USB storage medium connected to the FRITZ!Box can be reached in the home network by entering the shared FRITZ!Box password. From the Internet you can reach the USB storage medium only by logging in with your individual user name and password.
Sharing a USB Printer Suitable playback devices like TV sets, web radios, smartphones and the Windows Media Player can then call up the data from the media server for streaming. Playback devices to be used in connection with the media server must support the UPnP AV standard. The term “DLNA” is often used to designate this support. Enable the “Media Server” function in the FRITZ!Box user interface under “Home Network / Media Server”. 19.
Sharing a USB Printer If the FRITZ!Box is configured as a wireless repeater or an IP client, enter here the IP address at which the FRITZ!Box can be reached within the network. 7. Enter any name you wish in the “Port name” field and click “Next”. 8. Select the “Custom” option and click “Settings...”. 9. Enable the “Raw” option. 10. Enter “9100” in the “Port number” field and click “OK”. 11. Click “Next” and confirm with “Finish” and “Close”. 12.
Sharing a USB Printer The USB printer has been configured and can be used as a network printer. Setting Up a USB Printer in Mac OS X version 10.5 or higher 1. In the dock, click “System preferences”. 2. Click “Print & Fax”. 3. Click the “+” sign. 4. Click “IP Printer”. 5. In the “Protocol:” drop-down list, select the entry “HP Jet Direct – Socket”. 6. Enter “fritz.box” in the “Address:” input field.
Sharing a USB Printer Setting Up a USB Printer in Other Operating Systems The names of entries or menus in operating systems not described above may be slightly different than the terms we use here. • • • As the port type, select “Raw TCP”. Enter “9100” as the port. Enter “fritz.box” as the printer name. If the FRITZ!Box is configured as a wireless repeater or an IP client, enter here the IP address at which the FRITZ!Box can be reached within the network.
Managing Memory with FRITZ!NAS 20 Managing Memory with FRITZ!NAS With FRITZ!NAS you can display the data on the storage media of your FRITZ!Box in a clearly arranged interface. All participants in the FRITZ!Box home network can start FRITZ!NAS in a web browser and use it as a platform to access music, images, videos and documents in the FRITZ!Box memory. 20.
Assigning a FRITZ!Box Name 21 Assigning a FRITZ!Box Name You can assign an individual name for your FRITZ!Box in the FRITZ!Box user interface.
Controlling Smart Home Devices 22 Controlling Smart Home Devices With Smart Home devices from AVM you can automate tasks in your household and control them over the Internet. AVM Smart Home devices can be inserted in any outlets and connected wirelessly with the FRITZ!Box. All connected Smart Home devices can be configured directly at “Home Network / Smart Home” in the FRITZ!Box user interface, for instance, to automatically switch on and off a lamp and measure its energy consumption.
Configuring Internet Access for Guests 23 Configuring Internet Access for Guests With the FRITZ!Box you can provide houseguests with an Internet connection of their own. At this guest access they can surf the web with their own devices, but cannot access the contents of your home network. 23.1 Requirements The guest access in the FRITZ!Box can be configured and provided only if the FRITZ!Box establishes the Internet connection itself.
Configuring Guest Access on the LAN 4 Port 3. Assign a name for the guest wireless network (SSID) and enter a network key under “Security”. This concludes the setup of your guest access. Now guests can register their wireless devices with the FRITZ!Box. Registering a Wireless Device with the Wireless Guest Access 1. Your guest starts the wireless LAN software of her or his wireless device and searches for the guest network. 2. Your guests authorizes themselves using the network key you assigned.
Help in Case of Errors 24 Help in Case of Errors Here you can find assistance if no DSL connection is established, if the FRITZ!Box cannot be opened, or if errors occur with wireless LAN connections. For more help, see the AVM Knowledge Base in the Internet: en.avm.de/nc/service/fritzbox/fritzbox-7490/knowledgebase. 24.1 DSL Connection Not Established If the “Power / DSL” LED keeps flashing, the FRITZ!Box cannot establish a DSL connection.
The User Interface Does Not Open 24.2 The User Interface Does Not Open If the FRITZ!Box user interface cannot be opened, this can have various causes. Work through the following steps in sequence until the error has been resolved. Entering http://fritz.box in the Web Browser Enter http://fritz.box in the web browser instead of fritz.box. Google Chrome, for instance, performs a Google search if the address of the FRITZ!Box is not known and entered incompletely. Restarting the FRITZ!Box 1.
The User Interface Does Not Open Internet Explorer 1. Click the “Tools” button and select “Internet options”. 2. On the “General” tab, click the “Delete...” button in the “Browsing history” area. 3. Enable the “Temporary Internet files and website files” option and click “Delete”. Google Chrome 1. Open the Chrome menu (“Customize and Control Google Chrome” button) and select “History / Clear browsing data...”. 2.
The User Interface Does Not Open Internet Explorer 1. Click the “Tools” button and select “Internet options”. 2. Switch to the “Connections” tab and click the “LAN settings” button. 3. If the “Use a proxy server for your LAN” option is enabled, click the “Advanced” button. Under “Exceptions” enter the address “fritz.box” and click “OK”. If no proxy server is used, click “Cancel”. Google Chrome Check whether the use of a proxy server is enabled. If so, enter “fritz.
Cannot Establish a Wireless LAN Connection 3. Make sure that the computer obtains its IP address automatically; see page 145. 4. Clear all other connections between your FRITZ!Box and other network devices. 5. In the web browser, enter the address 169.254.1.1. 6. When the FRITZ!Box user interface is displayed, enable the DHCP server of the FRITZ!Box: In the user interface, select “Home Network / Network / Network Settings”.
Wireless LAN Connection Interrupted Announcing the Name of the Wireless Radio Network If the wireless LAN software on your computer cannot find the wireless radio network of the FRITZ!Box, make the following setting in the FRITZ!Box: 1. Connect a computer to the FRITZ!Box with a network cable; see page 26. 2. Open the FRITZ!Box user interface, see page 32. 3. Select “WLAN / Radio Network”. 4. Enable the option “Name of the radio network visible”. 5. Click “Apply”. 6.
Wireless LAN Connection Interrupted Positioning the FRITZ!Box and Wireless Devices Correctly Often all that is needed is to position the FRITZ!Box and wireless devices in different locations to improve the wireless LAN connection: • • Do not set up the FRITZ!Box in the corner of a room. • Position the FRITZ!Box and your wireless devices so that there are as few obstacles between them as possible.
Configuring FRITZ!Box on the Telephone 25 Configuring FRITZ!Box on the Telephone Various functions can be configured using a telephone connected to the FRITZ!Box. 25.1 Alarm Requirements • You set up an alarm in the FRITZ!Box; see the section Alarm on page 126. Can I Switch More than One Alarm On and Off? No. With the telephone keys you always switch on or off the first alarm.
Call Diversion Timetable and Do Not Disturb for Other Telephones In the FRITZ!Box user interface you can also configure the Do Not Disturb function for other telephones; see the section Do Not Disturb on page 125. There you also have the following options: • • configuring Do Not Disturb using a timetable configuring Do Not Disturb for other telephones Switching Do Not Disturb On and Off for FON 1 1. 2.
Call Diversion Enabling: Call Diversion for All Calls Here is how to configure call diversion to an external number (destination number) that applies to all incoming calls: 1. 2. Press the following keys on the telephone: Type of Call Diversion Keys immediately s21ssr delayed (after 20 seconds) s61ssr only when busy s67ssr Pick up the handset. Wait for the second-long positive acknowledgment tone. 3. Hang up the handset.
Call Diversion 2. Type of Call Diversion Keys immediately s21s sr delayed (after 20 seconds) s61s sr only when busy s67s sr Pick up the handset. Wait for the second-long positive acknowledgment tone. 3. Hang up the handset. Disabling: Call Diversion for Own Telephone Number 1. 2.
Call Diversion Type of Call Diversion Keys delayed (after 20 seconds) r421ss only when busy r431ss immediately when busy, oth- r441ss 2. Pick up the handset. Wait for the second-long positive acknowledgment tone. 3. Hang up the handset. Disabling: Call Diversion for FON 1 1. Press the keys s401rss on the telephone. 2. Pick up the handset. Wait for the second-long positive acknowledgment tone. 3. Hang up the handset.
Switching the Wireless Network On and Off Disabling: Call Diversion for FON 2 1. Press the keys s402rss on the telephone. 2. Pick up the handset. Wait for the second-long positive acknowledgment tone. 3. 25.4 Switching the Wireless Network On and Off 1. 2. 25.5 Hang up the handset. Press the following keys on the telephone: Function Keys Wireless LAN on r96s1s Wireless LAN off r96s0s Pick up the handset and hang it up again.
Disabling and Enabling Automatic Outside Dialing 25.6 Disabling and Enabling Automatic Outside Dialing On the “FON 1” and “FON 2 lines you can enable and disable automatic outside dialing. The default setting is “enabled”. When automatic outside dialing is enabled, dial “**” before internal numbers; when automatic outside dialing is disabled, dial “0” before external numbers.
Taking FRITZ!Box Out of Operation 26 Taking FRITZ!Box Out of Operation In this chapter you receive tips and recommendations for taking the FRITZ!Box out of operation. 26.1 Loading Factory Settings When the factory settings are restored to the FRITZ!Box, all of the settings in the FRITZ!Box are restored to their condition upon delivery. This way you can delete incorrect settings that prevent the FRITZ!Box from functioning properly.
Loading Factory Settings Saving FRITZ!Box Settings Before loading the factory settings, save all of the settings you made in your FRITZ!Box to a backup file. With this backup file you can restore your settings to the FRITZ!Box at any time or load them to another FRITZ!Box. For more information on this, see the Saving and Restoring the FRITZ!Box Settings from page 40 section. Saving Data from Internal Memory 1. Open the FRITZ!Box user interface, see page 32. 2.
Uninstalling Supplementary Software 26.2 Uninstalling Supplementary Software Additional software for the FRITZ!Box is available on the web pages of AVM at en.avm.de/service/downloads/?product=FRITZ%2521Box% 2B7490. If you have installed supplementary programs on one or more computers, uninstall this software using the control panel of your Windows operating system. Uninstalling Programs in Windows 8.1 or 8 1. Press the Windows key time.
Uninstalling Supplementary Software Uninstalling Programs in Windows Vista 1. Open “Start / Settings / Control Panel / Programs and Functions”. 2. Mark the AVM program you want to remove in the list. 3. Click the “Uninstall/Change” button and confirm with “Continue”. The program will be removed. Uninstalling Programs in Windows XP 1. Open “start / Control Panel / Add or Remove Programs”. Make sure that the “Change or Remove Programs” button is selected in the column at left. 2.
Technical Specifications 27 Technical Specifications Facts worth knowing: Here you will find comprehensive technical data on your FRITZ!Box 7490. 27.1 Ports and Interfaces • DSL/telephone port – VDSL/ADSL modem for use with ADSL/ADSL2/ADSL2+ (also IP-based, Annex J) or ITU G.992.1, ITU G.992.3, ITU G.992.5 (Annex B or J) or VDSL2 (also IP-based) or ITU G.993.
Router Functions 27.2 Router Functions • • • • • • • • 27.3 27.4 27.
Cables • • Maximum power consumption: 27 W Average power consumption: 9.3 W The average power consumption was determined at room temperature (23 °C to 27 °C) with the following load: – DSL connection active – wireless LAN on; no devices registered via wireless LAN – DECT on; one telephone registered via DECT; no active calls – one network device connected to a LAN port; no data transfer; other LAN ports not in use 27.
Cables You can extend one or both ends of the network cable. You will need the following components to extend the cable: • Standard Cat-5 network cable, type STP (shielded twisted pair) – When components of a category smaller than Cat 5 are used, reduced transmission rates may result. – You can use both straight cables and crosslink cables. • 1 standard RJ45 CAT-5 double coupling with a 1:1 pinout All components are available from specialized vendors. Replacement The network cable is a standard cable.
Customer Service 28 Customer Service Be it product documentation, frequently asked questions, tips or support: This chapter presents information on all important service topics. 28.1 Documentation on the FRITZ!Box To take advantage of all commands and features of your FRITZ!Box, consult the following documentation: Help In the FRITZ!Box user interface you can open the comprehensive Online Help by clicking the “Help” icon and the “Help” buttons.
Feedback on FRITZ!Box AVM Knowledge Base In our AVM Knowledge Base you can find answers to your questions and specific solutions to your problems. The AVM Knowledge Base is located in the “Service” area for each product on the AVM web site: en.avm.de/nc/service/fritzbox/fritzbox-7490/knowledgebase 28.3 Feedback on FRITZ!Box In various places in the user interface, the FRITZ!Box offers you the opportunity to send your concrete feedback to AVM. Your feedback helps us to continually improve the FRITZ!Box.
Assistance from the Support Team Evaluating the Voice Quality of Internet Calls In the advanced view of the FRITZ!Box (see page 34), the “Telephony / Own Telephone Numbers / Voice Quality” page offers you the opportunity to evaluate the quality of the Internet call. Your evaluation will help us continue to improve the quality of voice transmission in Internet calls made over the FRITZ!Box. The contents of the call and numbers participating will not be transmitted to AVM. 28.
Assistance from the Support Team Support by e-mail You can send us an English-language e-mail request at any time using the “Service” area of our web site. You can reach the support request in the service area at en.avm.de/service/support-request/your-support-request 1. Select the product group and your product for which you need support from the “Support” area. You will receive a selection of FAQs. 2. If you need more help, click the “Contact Support” button to open the e-mail support form. 3.
Manufacturer’s Warranty 28.5 Manufacturer’s Warranty We offer a manufacturer’s warranty of 5 years on the hardware of this original product. The warranty period begins with the purchase date from the first end user. Compliance with the warranty period can be proven by submission of the original invoice or comparable documents. This warranty does not restrict your warranty rights based on the contract of sale or other statutory rights.
Legal Notice Legal Notice This documentation and the software it describes are protected by copyright. AVM grants the nonexclusive right to use the software, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. AVM reserves all rights that are not expressly granted to the licensee.
Declaration of CE Conformity The manufacturer AVM GmbH Alt-Moabit 95 D 10559 Berlin Germany herewith declares that the product FRITZ!Box 7490 ADSL-WLAN router complies with the following directives: 1999/5/EC R&TTE Directive: Radio Equipment and Telecommunications Terminal Equipment 2009/125/EC EU directive: ecodesign requirements for energy-related products 2011/65/EU EU directive: on the restriction of the use of certain hazardous substances in electrical and electronic equipment The following norms
Disposal Information In accordance with European regulations, the FRITZ!Box 7490, as well as all devices and electronic components contained in the package, may not be disposed with household waste. After use, please dispose of FRITZ!Box 7490 and all electronic components and devices included with delivery at a collection point in your local community for the disposal of electric and electronic appliances.
Drilling Template A drilling template is presented below. Use the drilling template as a guide to mark the holes needed to mount the FRITZ!Box on a wall.
Index A connecting answering machine . . . . . . . . . . . . 51 behind modem . . . . . . . . . . . . . 22, 47 behind router . . . . . . . . . . . . . . . . . 23 computer. . . . . . . . . . . . . . . . . . . . . 26 door intercom system . . . . . . . . . . 55 DSL . . . . . . . . . . . . . . . . . . . . . . . . . 20 electrical power . . . . . . . . . . . . . . . 19 fax machine . . . . . . . . . . . . . . . . . . 51 hub/switch . . . . . . . . . . . . . . . . . . . 27 landline . . . . . . . . . . . . . . . . .
D F declaration of CE conformity . . . . . . . 188 DECT base station . . . . . . . . . . . . .14, 136 DECT button. . . . . . . . . . . . . . . . . . . . . . 15 DECT cordless telephone deregistering. . . . . . . . . . . . . . . . . 136 paging . . . . . . . . . . . . . . . . . . . . . . 136 registering . . . . . . . . . . . . . . . . . . . . 52 DECT Eco . . . . . . . . . . . . . . . . . . . . . . . 136 device properties . . . . . . . . . . . . . . . . 179 DHCP server (integrated) . . . . . . . . . .
G I Green AP (wireless LAN) . . . . . . . . . . . . 36 green mode (LAN) . . . . . . . . . . . . . . . . . 37 guest access LAN4 . . . . . . . . . . . . . . . . . . . . . . . 159 see guest network . . . . . . . . . . . . 158 wireless LAN . . . . . . . . . . . . . . . . . 158 guest network configuring . . . . . . . . . . . . . . . . . . 158 imprint . . . . . . . . . . . . . . . . . . . . . . . . . 187 information in the Internet knowledge base . . . . . . . . . . . . . . 183 videos . . . . . . . . . . . . .
L night service . . . . . . . . . . . . . . . . . . . . 103 notice legal. . . . . . . . . . . . . . . . . . . . . . . . 187 notifications . . . . . . . . . . . . . . . . . . . . . 38 LAN connecting . . . . . . . . . . . . . . . . . . . 26 guest access . . . . . . . . . . . . . . . . . 159 landline connecting . . . . . . . . . . . . . . . . . . . 24 telephone number . . . . . . . . . . . . 129 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 legal notice . . . . . . . . . . . . . . . . . . .
S T saving data . . . . . . . . . . . . . . . . . . . . . 174 saving electricity . . . . . . . . . . . . . . . . . . 36 schedule . . . . . . . . . . . . . . . . . . . .36, 103 security FRITZ!Box password . . . . . . . . . . . . 59 FRITZ!Box user account . . . . . . . . . 61 FRITZ!OS update . . . . . . . . . . . . . . . 42 installing and connecting . . . . . . . . 8 password protection . . . . . . . . . . . 58 saving settings . . . . . . . . . . . . . . . . 40 VPN . . . . . . . . . . . . . . . . . . . . .
U W UMTS Internet access . . . . . . . . . . . . . . . . 47 Internet connection . . . . . . . . . . . . 23 substitute connection . . . . . . . . . . 98 uninstalling programs. . . . . . . . . . . . . 176 uninstalling supplementary software 176 update . . . . . . . . . . . . . . . . . . . . . . . . . . 42 updating firmware. . . . . . . . . . . . . . . . . 42 UPnP settings . . . . . . . . . . . . . . . . . . . 145 usage data. . . . . . . . . . . . . . . . . . . . . . . 38 USB accessing memory . . . . . . . .
