Operation Manual

FRITZ!Box 7430 26
Entering the Network Key on the Wireless Device
3. Select the wireless radio network of the FRITZ!Box and
start connecting with WPS.
4. For this step you have two minutes: Press the “WLAN”
button on the FRITZ!Box and hold it down until the
“WLAN” LED begins flashing.
The wireless LAN connection will be established.
6.2 Entering the Network Key on the Wireless Device
You can establish a wireless LAN connection by entering the
FRITZ!Box network key on the wireless device.
The preset network key is printed on the bottom of the hous-
ing on the FRITZ!Box. A new network key can be entered in the
user interface.
1. If the “WLAN” LED on the FRITZ!Box is off, press the
“WLAN” button briefly.
The wireless radio network will be switched on.
2. Open the wireless LAN software on your wireless device.
In Windows 8.1, 8 and 7, do this by clicking the wireless
LAN icon in the task bar.
3. Select the wireless radio network of the FRITZ!Box.
The preconfigured name of the wireless radio network
(SSID) is consists of “FRITZ!Box 7430” and two capital
letters, and is printed on the bottom of the housing.
4. Click “Connect”.
InfoInfo
DECT
Fon
WLAN
Power/DSL
WLAN
DECT
WPS