Operation Manual

FRITZ!Box 7430 20
Connecting to the Internet
Connecting to the DSL Line
Connecting to a telephone socket
1. Insert the DSL cable (gray) into the “DSL/TEL” socket on
the FRITZ!Box.
2. Insert the free end of the cable into the socket on the
DSL splitter labeled “DSL”.
After a short time the “Power / DSL” LED on the FRITZ!Box
lights up. The FRITZ!Box is ready to connect to the Internet.
If the “Power / DSL” LED continues flashing, read DSL
Connection Not Established on page 155.
Connecting to the Cable Junction
With an additional cable modem you can also use your
FRITZ!Box 7430 on a cable connection. Use a network cable.
1. Connect the free end of the network cable to the LAN
(Ethernet) port on the cable modem.
2. Connect the other end of the network cable to the socket
on the FRITZ!Box labeled “LAN 1”.
3. Connect a computer with the FRITZ!Box either via wire-
less LAN or using a network cable; see Connecting a
Computer with a Network Cable from page 22 and
Connecting Devices with the FRITZ!Box over Wireless LAN
from page 24.
4. Set up the Internet connection for connections via cable
in the FRITZ!Box; see page 45.
INFOINFO
WLANWLAN
FestnetzFestnetz
InternetInternet
PowerPower / DSLDSL
InfoInfo
WL
ANWLAN
PowerPower / DSLDSL
DECTDECT
FonFon
W
LAN
WPS
DECT