Operation Manual

FRITZ!Box 7430 16
LEDs
Assigning Any Event to the “Info” LED
The “Info” LED on the upper panel of the FRITZ!Box signals
various events. Some events for which the “Info” LED flashes
or lights up are preset in the FRITZ!Box. You also have the op-
tion of assigning any other event to the “Info” LED.
1. Open the FRITZ!Box user interface; see page 28.
2. Under “System/Buttons and LEDs”, click the ““Info” Dis-
play” tab.
3. In the “Freely Selectable Options” area, select from the
““Info” LED” list the additional event which is to be as-
signed to the LED.
4. Then click the “Apply” button.
The “Info” LED now flashes not only for the preset events, but
also for the event you selected.
Info on • Stick & Surf procedure with FRITZ!WLAN USB Stick from
AVM concluded
• The LED signals an event specified in the user interface
under “System / Buttons and LEDs / “Info” Display”
flashing
• Updating FRITZ!OS
• Stick & Surf procedure with FRITZ!WLAN USB Stick from
AVM in progress
• Signals an event specified in the user interface under
“System / Buttons and LEDs / “Info” Display”
flashing red Error:
• Open the FRITZ!Box user interface; see page 28
• Follow the instructions under “Overview” in the user in-
terface
LED Condition Meaning