Operation Manual

LEDs
FRITZ!Box 7430 15
2.3 LEDs
The FRITZ!Box 7430 has five LEDs, which flash or light up to
display various connection statuses and events.
For the “Info” LED you can assign any event desired in addi-
tion to the preset events. For more information, read
Assigning Any Event to the “Info” LED on page 16.
Meaning of the LEDs
LED Condition Meaning
Power /
DSL
on Device has electrical power and the DSL line is ready for op-
eration
flashing Device has electrical power and the connection to DSL is
being established or has been interrupted
Fon on Telephone connection to the Internet is active
flashing Messages in your voice mail or e-mail inbox
This function must be supported by your telephony provider
DECT on DECT function is enabled
flashing Registration procedure for a DECT device in progress
WLAN on Wireless LAN is enabled
flashing
• Switching wireless LAN function on or off
• Applying changes to the wireless LAN settings
• Performing WPS
• WPS procedure aborted: More than two wireless LAN de-
vices are performing WPS at the same time. Repeat the
WPS procedure.