Operation Manual

Enabling Push Services
FRITZ!Box 7430 141
23.2 Enabling Push Services
A wizard is available in the FRITZ!Box user interface to guide
you step by step through the configuration of push services.
1. Open the FRITZ!Box user interface; see page 28.
2. Select “Wizards”.
3. Start the “Configure Push Service” Wizard.
The wizard guides you through the menus and dialogs to en-
able the push services.
23.3 Configuring Push Services
You can adjust the push services to your needs, and also dis-
able any or all push services.
1. Open the FRITZ!Box user interface; see page 28.
2. Select the “System / Push Service / Push Services”
menu.
3. To configure a push service, click the “Edit” button.
4. Configure various settings in the details.
The Help of the FRITZ!Box user interface presents com-
prehensive information on the settings of each push ser-
vice.
5. Click “OK” to save your settings.
In the Help of the FRITZ!Box user interface you can find de-
tailed instructions.
Save settings The settings of your FRITZ!Box are saved au-
tomatically and sent to the specified e-mail
address before every update and each time
the factory settings are restored.
Forgot password Sends you an access link to the specified
e-mail address if you have forgotten your
password.
Current IP address Sends the IP address assigned by the Inter-
net service provider every time the Internet
connection is established.
Push Service Information