Operation Manual

Sharing a USB Printer
FRITZ!Box 7430 123
18.7 Sharing a USB Printer
You can connect a USB printer to the FRITZ!Box to make it
available to all participants in your home network.
You can either release the printer for sharing as a network
printer or use the FRITZ!Box USB remote connection software
to connect it with a computer.
Using a USB Printer as a Network Printer
Configure the USB printer as a network printer on the
FRITZ!Box if
• the participants in the home network are to be able to
use the printer jointly and simultaneously.
• the printer is to be used by computers that use an oper-
ating system other than Windows.
For information about how to configure a USB printer as a net-
work printer, see the section Configuring a USB Printer as a
Network Printer on page 124.
Using a USB Printer with FRITZ!Box USB Remote Connection
Configure the USB printer on the FRITZ!Box with the FRITZ!Box
USB remote connection if
• the USB printer is an all-in-one device (fax/printer/scan-
ner) and the entire range of functions is to be used.
• the USB printer is equipped with convenience features
like ink level display and you would like to use these.
• the USB printer uses bidirectional data exchange. In oth-
er words: Not only does the computer send data to the
printer, the printer also sends status messages to the
computer. This communication in both directions is typi-
cal of the “Windows printers” or “GDI printers” that work
only with special Windows device drivers.
For information about how to configure a USB printer with the
USB remote connection, continue reading from the section
Configuring a USB Printer with FRITZ!Box USB Remote
Connection on page 127.