Operating Instructions and Installation Instructions

Do Not Disturb

For every analog extension of the FRITZ!Box, the Do Not

Disturb option can be enabled by telephone. When Do Not

Disturb is set, the telephone connected to the extension

will not ring. In configuring this function you can choose

between enabling the function immediately or selecting a

specific time period.

Immediately When Do Not Disturb is enabled immediately, no incoming

calls will be signaled at the specified extension. The Do

Not Disturb setting will remain enabled until it is disabled.

Period Alternatively, you can enter a Do Not Disturb period during

which the telephone will not ring. At the extension for

which a Do Not Disturb period is to be configured, define

the period during which the telephone should not ring and

save your entries. Then enable Do Not Disturb. Do Not Dis-

turb then automatically will be switched on daily at the

time entered in the “Start” field and switched off again at

the time defined in the “End” field.

Example: Do Not Disturb should be configured from

8:00 p.m. until 7:00 a.m. daily. Enter the value “2000” for

<Start> and “0700” for <End>.

Disabling Both kinds of Do Not Disturb settings can be disabled by

means of a keypad sequence.

Enabling Do Not Disturb Effective Immediately

r81<Ext.>s0s Immediately enables Do Not Disturb for

the extension entered as <Ext>.

r91ss Saves the settings.

Enabling Do Not Disturb for a Prescribed Period

r80<Ext.>s

<Start>s<End>s

Defines the period for Do Not Disturb at

extension <Ext.>.

r91ss Saves the settings.

r81<Ext.>s6s Enables Do Not Disturb for the defined

period.

r91ss Saves the settings.