FRITZ!Box Fon WLAN 7390 Installation, Configuration and Operation
Legal Notice FRITZ!Box Fon WLAN 7390 This documentation and the software it describes are protected by copyright. AVM grants the nonexclusive right to use the software, which is supplied exclusively in what is known as object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. AVM reserves all rights that are not expressly granted to the licensee.
Table of Contents I CONNECTING AND OPERATION . . . . . . . . . . . . . . . . . . . . . . 8 1 Security and Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 FRITZ!Box Fon WLAN 7390 . . . . . . . . . . . . . . . . . . . . . . . . 10 2.1 2.2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Operation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3 Connecting. . . . . . . . . . . . . . . . .
6 Internet Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 6.1 6.2 6.3 6.4 6.5 6.6 Configuring an Internet Connection Automatically over DSL . . . . . . . 42 Configuring the Internet Connection via DSL Using the Wizard . . . . . 44 Configuring the Internet Connection via DSL Manually . . . . . . . . . . . 44 Internet Connection via Cable Modem . . . . . . . . . . . . . . . . . . . . . . . . 45 Internet Connection via the Mobile Telephone Network . . . . . . . . . .
11 Removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 11.1 Disconnecting the FRITZ!Box from the Computer . . . . . . . . . . . . . . . 120 11.2 Removing the Printer Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 II PRODUCT DETAILS AND USEFUL INFORMATION . . . . . . . 122 1 Product Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Cable . . . . . . . . . . . . . . . . . . . . . .
5 More about: Virtual Private Network (VPN) . . . . . . . . . . 160 5.1 5.2 5.3 5.4 What Is VPN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Security through a VPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Tunnel Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Supplementary Software for VPN . . . . . . . . . . . . . . . . . . . . . . . . . . .
Symbols and Highlighting Symbols and Highlighting This symbol indicates useful hints to assist you in working with the FRITZ!Box. This symbol indicates important instructions that must be observed to avoid malfunctions.
Security and Handling I CONNECTING AND OPERATION 1 Security and Handling What to Watch Out For Safety Instructions Handling the FRITZ!Box When working with the FRITZ!Box Fon WLAN 7390, observe the following security instructions in order to protect yourself and the FRITZ!Box from harm. • Do not install the FRITZ!Box during an electrical storm. • Disconnect FRITZ!Box from the power supply during electrical storms. • Never let liquids get inside the FRITZ!Box.
Security and Handling • If you would like to establish wireless connections between FRITZ!Box and the computer, position the device at a central location. • Make sure to keep sufficient distance from potential sources of interference like microwave devices or electric devices with large metal housings.
FRITZ!Box Fon WLAN 7390 2 FRITZ!Box Fon WLAN 7390 An Overview The FRITZ!Box connects your computers directly with your DSL or VDSL line. Each connected computer can establish an Internet connection over the FRITZ!Box. As a WLAN access point, FRITZ!Box offers you the possibility of connecting your computer to the DSL or VDSL line wirelessly. The FRITZ!Box is a Private Branch Exchange (PBX) for making telephone calls via the Internet and the fixed-line network (ISDN and analog). UMTS/HSPA modem 2.
FRITZ!Box Fon WLAN 7390 Local Network Internet All of the computers connected with the FRITZ!Box constitute a network and can share access to any files released for file sharing. All of the computers connected to the FRITZ!Box can access the Internet. The FRITZ!Box works as a DSL router, making the Internet connection available to all connected computers. All connected computers can then use the Internet connection at the same time. Firewall The FRITZ!Box is equipped with an integrated firewall.
Package Contents 2.1 Package Contents The following is included in the FRITZ!Box Fon WLAN 7390 package: 2.
Operation Requirements • for connection via WLAN: computer with a WLAN adapter compliant with IEEE 802.11n, g, a or IEEE 802.
Connecting 3 Connecting Connecting FRITZ!Box This chapter contains instructions on the following topics: • connecting FRITZ!Box to electrical power • • • • • • connecting one or several computers to the FRITZ!Box connecting FRITZ!Box to DSL connecting FRITZ!Box to ISDN or the analog telephone line connecting analog terminal devices to the FRITZ!Box connecting ISDN terminal devices to the FRITZ!Box connecting an IP telephone Please see the instructions about setting up the FRITZ!Box in section “Securit
Connecting the Computer(s) 3.2 Connecting the Computer(s) If you would like to surf the web using the FRITZ!Box or to open the FRITZ!Box user interface, then you must connect a computer with the FRITZ!Box. A computer can be connected with the FRITZ!Box in two different ways: • • Connection Scenarios via a LAN port wirelessly via WLAN Note the following when connecting computers to the FRITZ!Box: • One computer can be connected to the FRITZ!Box by only one of these means.
Connecting Computers to the LAN Port 3.3 Connecting Computers to the LAN Port If you would like to connect a computer to the LAN port of the FRITZ!Box, make sure the computer is equipped with a LAN port (network adapter). A LAN port is usually designated by the icon at left or labeled “LAN”. d xe Fi SL /D er w Po t e rn te In e n Li N LA W FO IN Connecting a computer to a LAN port on the FRITZ!Box Connect Set aside the network cable (yellow) from the FRITZ!Box package. 1.
Connecting More Computers to the LAN Ports Connecting More Computers to the LAN Ports Additional cables are required to connect further computers. In purchasing a LAN cable, note the instructions in the section “Network Cable” on page 123. You can connect a computer to any of the four LAN ports of the FRITZ!Box at any time. Connecting a Network Hub or Switch You can connect a network hub or switch to one of the LAN ports on the FRITZ!Box if you would like to connect multiple computers via LAN.
Connecting Computer(s) Wirelessly via WLAN 3.4 Connecting Computer(s) Wirelessly via WLAN Using WLAN you can connect one or multiple computers with the FRITZ!Box wirelessly. The wireless WLAN connection is independent of the operating system used. Each computer to be connected to the FRITZ!Box via WLAN must be equipped with a compatible WLAN adapter, for instance the FRITZ!WLAN USB Stick. Many modern computers and notebooks have an integrated WLAN adapter.
Establishing a WLAN Connection Using WPS For more information, see the manual on the AVM FRITZ!WLAN USB Stick N, the manual for the AVM FRITZ!WLAN USB Stick N 2.4, or the manual for the AVM FRITZ!WLAN USB Stick. Establishing a WLAN Connection Using WPS If you are using a WLAN adapter from another manufacturer and your WLAN adapter supports WPS (Wi-Fi Protected Setup), you can also use this mechanism to establish the WLAN connection between your computer and the FRITZ!Box.
Establishing a WLAN Connection Manually SSID (name of the FRITZ!Box Fon WLAN 7390 WLAN radio network) 3. Encryption methods WPA (TKIP) or WPA2 (AES-CCMP) Encryption WPA PSK or WPA2 PSK (AES) WLAN key The key is printed on the sticker on the base of the device. Network mode Infrastructure Confirm your entries using the relevant button in the user interface (for instance, “OK” or “Connect”). Now your WLAN adapter and the FRITZ!Box are connected with each other wirelessly.
Connecting to the DSL Line 9. Configure your WLAN adapter with the security settings entered in the FRITZ!Box. The WLAN connection between your WLAN adapter and the FRITZ!Box will be established. We strongly recommend the use of a WLAN adapter that supports WPA or WPA2 (for instance, an AVM FRITZ!WLAN USB Stick, see also page 18). WEP is out of date and data encrypted with WEP can be deciphered within minutes. 3.
Connecting to the Analog Telephone Line As soon as the connection to the DSL line is ready for operation, the “Power/DSL” LED stops flashing and stays lit. You can connect the FRITZ!Box to the Internet via DSL, or using alternative access technologies. For information about how to proceed, see the section “Internet Connections” from page 41. 3.6 Connecting to the Analog Telephone Line Your telephone line is either an analog line or an ISDN line.
Connecting to the ISDN Line Now the FRITZ!Box is connected to the telephone line. 3.7 Connecting to the ISDN Line Your telephone line is either an analog line or an ISDN line. If you have an ISDN line, read here how to connect the FRITZ!Box with the ISDN line. d xe Fi SL /D er w Po t e rn te In N e n Li LA W FO IN Connecting to the ISDN NT Connecting Set aside the Y-shaped cable (gray-black) delivered in the package. This cable is a combined DSL/telephone cable. 1.
Connecting Telephone, Fax, or Answering Machine 3.8 Connecting Telephone, Fax, or Answering Machine The FRITZ!Box provides Internet and/or fixed-line telephony for analog terminal devices. er w Po SL /D In te t e rn e n st Fe tz N LA W IN FO Connecting to an analog telephone Analog telephones, fax machines and answering machines can be connected to the “FON 1” or ”FON 2” socket on the FRITZ!Box. 3.9 Connecting ISDN Telephones ISDN telephones can be connected to the FRITZ!Box.
Connecting ISDN PBXs Connect Use an ISDN cable to connect an ISDN telephone. 1. Connect one end of the ISDN cable with the ISDN telephone. 2. Connect the other end of the ISDN cable with the “FON S0” port of the FRITZ!Box. 3.10 Connecting ISDN PBXs If you have an ISDN PBX, you can connect this PBX to the FRITZ!Box. With the telephones connected to the PBX you can make calls in the usual fashion. The ISDN PBX must support a point-to-multipoint line.
Connecting IP Telephones 3.11 Connecting IP Telephones IP telephones can be connected to the FRITZ!Box Fon WLAN 7390 at the LAN ports or via WLAN. Connecting to a LAN Port At the LAN ports of the FRITZ!Box you can connect IP telephones using a LAN cable. er w Po t e rn te In SL /D e n Li N LA W d xe Fi FO IN Connecting an IP telephone to the FRITZ!Box 1. Connect one end of the LAN cable with the IP telephone. 2.
Connecting IP Telephones 1. Use your smart phone to search for WLAN devices at your location. 2. Select the FRITZ!Box Fon WLAN 7390 from the list of WLAN devices found. 3. To establish a connection, enter the WLAN key of the FRITZ!Box. The smart phone is now connected to the FRITZ!Box. Before you can make telephone calls over the FRITZ!Box using software that takes advantage of the features of an IP telephone, this phone must be configured once.
Opening the User Interface 4 Opening the User Interface fritz.box The FRITZ!Box has a user interface that can be used in a web browser. The user interface presents information about the FRITZ!Box product, access and connections. This is where you configure all of the settings for operating the FRITZ!Box. The user interface can be opened from any computer connected with the FRITZ!Box. The settings you configure are saved in the FRITZ!Box. Starting 1. Start a web browser on your computer. 2.
Password Protection 4.1 Password Protection You can protect the FRITZ!Box user interface from unauthorized and unwelcome access by setting up a password. Only users who know the password can access the user interface. This protects all settings and all information in the FRITZ!Box. We strongly recommend setting up and using password protection for the user interface.
Setting Up Password Protection Setting Up Password Protection There are several ways to set up password protection in the FRITZ!Box: • On the login screen: As long as password protection is not enabled and you have not switched off the prompt to use password protection, you will be prompted to set up password protection every time you open the user interface. • In the “System / FRITZ!Box Password” menu: In this menu you can set up password protection, or change a password that has already been set up.
Telephone Connections 5 Telephone Connections Configuring FRITZ!Box for Telephony Using the FRITZ!Box you can make telephone calls via the Internet and the fixed-line network. Once you have connected the FRITZ!Box as described in the chapter “Connecting” from page 14, you can configure the FRITZ!Box for making telephone calls.
Entering New Internet Telephone Numbers Entering New Internet Telephone Numbers In order to be able to make calls via the Internet with the FRITZ!Box, you will need an Internet telephone number from an Internet telephony provider. Enter the Internet telephone number in the FRITZ!Box. You can enter multiple Internet numbers in the FRITZ!Box. The Internet numbers can be from one or from multiple different Internet telephony providers.
Settings for Telephony Devices • answering machine If you have connected an analog answering machine (to the “FON 1” or “FON 2” socket, for instance), configure it as an answering machine. The FRITZ!Box is also equipped with integrated answering machines, which can be enabled and configured in the “Telephony / Telephony Devices” menu.
Settings for Telephony Devices – Number used to conduct outgoing calls: With this entry you specify whether outgoing calls should be conducted via the Internet or the fixed-line network. – Call acceptance: Specify here whether the telephone should react to all calls or only to calls for certain telephone numbers.
Setting Up an IP Telephone in the FRITZ!Box – USB memory on which the incoming faxes are stored. For this option a USB memory device must be connected to the USB port of the FRITZ!Box. – Automatic fax detection for an analog fixed line, which detects whether an incoming call is a fax.
Telephony Functions 7. Enter the password, the user name and the registrar in your IP telephone. Be sure to consult the documentation for your telephone on how to do this. 8. Confirm the Telephony Wizard of the FRITZ!Box by clicking “Next” and follow the instructions. The IP telephone will be set up in the FRITZ!Box so that it can be used to make telephone calls. 5.3 Telephony Functions More functions and settings options for telephony are available in the “Telephony” menu.
Call Diversion Call Diversion With this function you can divert incoming calls to another number. The following kinds of call diversion are available: Menu • diversion of all incoming calls to a certain telephone number • • diversion of calls for certain numbers • diversion of calls to other that come from a certain telephone number diversion of calls to other telephones connected with the FRITZ!Box The “Call Diversion” menu is located in the “Telephony” menu.
Alarm Alarm With the alarm function you can use the telephones connected to the FRITZ!Box as alarm clocks. Menu • You can specify several different times for the alarm to go off. • An individual telephone can be selected for the alarm function. The “Alarm” function is located in the “Telephony” menu. Dialing Rules Dialing rules specify when calls are conducted on the fixed-line network, and when they take place over the Internet.
Integrated Answering Machine the wizard for telephony devices to set up an answering machine, so that fax detection can also function when you do not accept a call. The integrated fax machine of the FRITZ!Box supports only fax reception. To send faxes you can install the “FRITZ!fax for FRITZ!Box” software. This program can be downloaded from the AVM web site for the operating systems Windows 7, Windows Vista and Windows XP.
Operating the Answering Machine via Telephone Keypad 5.4 Operating the Answering Machine via Telephone Keypad Main menu 1 Play back messages If no messages have been recorded, you hear two short audio signals and return to the main menu.
Internet Connections 6 Internet Connections Setting Up the Internet Connection In order to allow Internet access with the FRITZ!Box, you must first configure the Internet connection in the FRITZ!Box user interface. The FRITZ!Box can be operated directly at the DSL line. Alternatively, it can be connected to a cable modem, a DSL modem, or a DSL router, or integrated into an existing network.
Configuring an Internet Connection Automatically over DSL or “autoprovisioning”), we recommend always setting up the Internet connection of your FRITZ!Box in this way. The FRITZ!Box then is set up automatically and securely, with the data necessary for Internet use and any other services ordered from your provider, like Internet telephony.
Configuring an Internet Connection Automatically over DSL The Automatic Configuration Procedure Proceed as follows to perform automatic configuration: Your Internet Service Provider transmitted you information about the configuration of your Internet connection. Always perform the Internet connection setup as described by your provider! 1. Connect the FRITZ!Box to the DSL line. The automatic configuration starts automatically. 2. Wait until the automatic configuration has concluded.
Configuring the Internet Connection via DSL Using the Wizard 6.2 Configuring the Internet Connection via DSL Using the Wizard If the FRITZ!Box is connected directly to the DSL line, the account information from your Internet Service Provider is required to configure the Internet connection in the FRITZ!Box. Use the Wizard to configure the Internet connection: 6.3 1. Open the FRITZ!Box user interface. 2. Select the “Wizards” menu. 3.
Internet Connection via Cable Modem 6.4 Internet Connection via Cable Modem With an additional cable modem you can also use your FRITZ!Box Fon WLAN 7390 on a cable connection. Then the Internet connection is established and controlled by the FRITZ!Box itself, so that in this operating mode, too, all FRITZ!Box functions (like Internet telephony, firewall) are available without restriction. 1. Use a network cable to connect the cable modem with the “LAN 1” port on the FRITZ!Box. 2.
Internet Connection via the Mobile Telephone Network 6.5 Internet Connection via the Mobile Telephone Network In situations where DSL is not available, you can use your FRITZ!Box Fon WLAN 7390 to connect to the Internet via the mobile telephone network. A USB modem for mobile Internet access (UMTS/HSPA) is required for this. The USB modem is simply inserted into the USB port of the FRITZ!Box. The FRITZ!Box supports UMTS/HSPA modems from various manufacturers.
Surfing the Net Due to technical limitations on the part of the mobile telephone network carriers, some limitations may arise for Internet telephone calls and for applications requiring an incoming connection. The same is true for using port forwarding, sharing USB storage memory, remote maintenance via HTTPS, dynamic DNS and VPN. Contact your network carrier for details on any restrictions that may apply. 6.
DECT Function 7 DECT Function Cordless Telephony with FRITZ!Box Thanks to the integrated DECT function, the FRITZ!Box Fon WLAN 7390 can be used as a base station for cordless telephones that support the DECT GAP or CAT-iq standard. A total of up to five cordless telephones can be registered on the FRITZ!Box. 7.1 Registering the FRITZ!Fon MT-F Cordless Telephone The AVM FRITZ!Fon MT-F supports the DECT radio standard, making it an ideal handset for your FRITZ!Box Fon WLAN 7390.
Registering Cordless Telephones • With FRITZ!Fon MT-F you can use your FRITZ!Box telephone book. New numbers recorded in a call list on FRITZ!Fon MT-F can be transferred directly from the call list to the FRITZ!Box telephone book. For detailed descriptions of this and other features, see the documentation for your FRITZ!Fon MT-F. 7.2 Registering Cordless Telephones With FRITZ!Box Fon WLAN 7390 you can use all cordless telephones that support the DECT-GAP and CAT-iq radio standards.
Searching for Cordless Telephones by Paging Call The internal numbers of the telephones connected to the FRITZ!Box are displayed. 7.4 Searching for Cordless Telephones by Paging Call Using the DECT button on the top of the device you can search for lost handsets by starting a paging call. Press the DECT button briefly and all of the cordless telephones connected with the FRITZ!Box will ring. A paging call cannot work if a handset has dead batteries.
USB Devices 8 USB Devices USB Devices at the FRITZ!Box The FRITZ!Box Fon WLAN 7390 is equipped with two USB ports (also known as USB host controllers). The USB ports of the FRITZ!Box support the standards USB 2.0 and USB 1.1. Various USB devices can be connected to the USB ports: • a FRITZ!WLAN USB Stick N 2.
Accessing USB Devices If you would like to use multiple devices at one USB port, you can also use a USB hub (see the section “USB Hubs” on page 63). Please read the “Tips for Using USB Devices” on page 66 first. 8.
USB Mass Storage Devices briefly into one of the USB ports on the FRITZ!Box, where it receives all of the security settings required for the WLAN connection to this FRITZ!Box. For instructions on establishing a WLAN connection using Stick & Surf, see the section “Connecting the FRITZ!WLAN USB Stick” from page 18. For more information on the various FRITZ!WLAN USB Sticks by AVM and the WLAN standards each of them supports, see the FRITZ!WLAN USB Stick N manual, the FRITZ!WLAN USB Stick N 2.
Accessing the Data on the USB Mass Storage 5. Configure the access rights and password protection for the USB mass storage devices. The access rights and password are are not enabled if the USB remote connection is enabled for all USB storage devices. Accessing the Data on the USB Mass Storage USB storage devices connected to the FRITZ!Box directly or via a USB hub are displayed with their device name in the “Home Network / USB Devices” menu on the user interface.
USB Printer With the media server, media files of all kinds of formats can be made available from the connected USB storage device via UPnP. The USB network storage, media server and FTP functions can be used only if the USB remote connection is not enabled for USB storage devices. 8.5 USB Printer To connect a USB printer to one of the USB ports of the FRITZ!Box, you can either enable the USB remote connection or use the USB printer as a network printer.
USB Printer as a Network Printer turer has provided driver software. Such printers connected to the FRITZ!Box are not supported as network printers. USB Printer as a Network Printer When you connect a USB printer to the FRITZ!Box and set it up without using the “USB Remote Connection” software, the FRITZ!Box manages the printer itself and makes it available as a network printer to all computers connected to the FRITZ!Box.
USB Printer as a Network Printer Configuring the Windows Printer Port for a Network Printer If the “FRITZ!Box” entry is already listed in the “Programs” group of the start menu of the computer, this means that the printer port is already configured on this computer. Otherwise, work through the instructions below to configure the printer port. Note that this manual describes only how to configure and install the printer port in the 32-bit versions of the Windows operating systems.
USB Printer as a Network Printer 4. Select the “Use an existing port:” setting and then choose the entry “AVM: (FRITZ!Box USB Printer Port)” from the list. Click “Next”. 5. Select the manufacturer for the USB printer connected to the FRITZ!Box from the “Manufacturers” list and then select the exact model from the “Printers” list. Click “Next”. If the manufacturer or the model is not included in the lists, use an installation disk or CD with the required files and click “Have Disk...”. 6.
USB Printer as a Network Printer 8. Conclude the installation by clicking “Finish”. Installing Printer Drivers in Windows XP/2000 1. Open the start menu of the computer and click the “Printers and Faxes” entry (Windows XP) or click “Start / Settings / Printer” (Windows 2000). 2. In the “Printers and Faxes” window, click “Add a printer”. The “Add Printer” Wizard will be started. 3. Click “Next”. 4.
USB Printer as a Network Printer Setting Up Printers in SUSE Linux Systems A USB printer can be connected to the FRITZ!Box for use as a network printer. The printer is then available to all computers connected with the FRITZ!Box. You install the printer as “root” or “superuser”. 1. Open a console and enter the following command: lpadmin -p -E -v socket://: -m 2.
USB Printer as a Network Printer Setting Up USB Printers on Apple Computers A USB printer can be connected to the FRITZ!Box for use as a network printer. The printer is then available to all computers connected with the FRITZ!Box. The only printers that can be used are the ones whose drivers can be selected in the Printer utility or for which a compatible driver is available there. 1. Open “Programs / System Preferences / Print & Fax”. 2.
USB Printer as a Network Printer 3. Click “IP Printer”.
USB Hubs 4. In the “Protocol:” field, select the entry “HP Jet Direct – Socket”. 5. Enter in the “Address:” field the IP address of the FRITZ!Box: 192.168.178.1 6. Leave the “Queue:” field empty. 7. Enter the desired values in the “Name:” and “Location:” fields. 8. Enter a driver compatible with your printer in the “Print Using:” field. If the printer cannot be selected, it may be possible to select a compatible printer or printer driver. 9. Click the “Add” button to save your settings.
FRITZ!Box USB Remote Connection In total you can connect either four USB storage devices (hard drives, memory sticks), or three USB storage devices and a USB printer, directly to the FRITZ!Box or via a USB hub. 8.7 FRITZ!Box USB Remote Connection With the FRITZ!Box USB remote connection you can control connections between your computer and USB devices. The computer and the USB devices are all connected with the FRITZ!Box.
Enabling the USB Remote Connection Do not use the FRITZ!Box USB remote connection if multiple computers are to be able to access a single USB device connected to the FRITZ!Box at the same time (network printing function). Functions like FTP, USB network storage and the media server, which are provided by the FRITZ!Box, are not available as long as the USB remote connection is active for USB storage devices.
Disabling the USB Remote Connection Disabling the USB Remote Connection Perform the following steps to disable the USB remote connection: 1. Open a web browser on the computer for which the USB remote connection is to be disabled. 2. Enter fritz.box in the address field of the browser. 3. Enable the expert setting of the FRITZ!Box in the “System / Expert Mode” menu. Confirm by clicking “Apply”. 4. Open the “Home Network / USB Devices” menu. 5. Select the “USB Remote Connection” page. 6.
Tips for Using USB Devices • To avoid damage to the FRITZ!Box, only operate USB storage devices that require more than one USB port for operation (for instance hard drives with a Y cable) if they have their own power supply or a USB hub with its own power supply. • The FRITZ!Box can not defend the USB memory from external influences.
Configuration and Operation on the Telephone 9 Configuration and Operation on the Telephone FRITZ!Box Keypad Sequences Many of the FRITZ!Box functions and features can be configured and used over a telephone connected to a FRITZ!Box extension. Only tone-dialing (dual-tone multifrequency = DTMF) telephones can be used in configuration and operation. Pulse dialing telephones are not suitable.
Instructions for Operation at the Telephone 9.1 Instructions for Operation at the Telephone The table explains the icons used in this chapter: Icon Action M Dial a number. N Pick up the handset. O Hang up the handset. P Talk. D Three-party conference call Q Wait for the acknowledgement tone. K You hear the ring tone. Enter the number of an analog extension of the FRITZ!Box. In place of
Audio Signals 9.2 Audio Signals The following diagram illustrates the duration and intervals of the various audio signals and ring tones of the telephones connected to the FRITZ!Box Fon WLAN 7390. Audio signals and ring tones of the connected telephones 9.3 Configuring on the Telephone Saving New Settings In this section, saving refers to all current settings made in the FRITZ!Box. It is not necessary to save the configuration immediately after every change.
Restoring Factory Settings Saving Permanently N Pick up the handset. r91ss Save all settings permanently by dialing the sequence shown at left. O Hang up the handset. Restoring Factory Settings All of the settings in the FRITZ!Box can be reset to their condition upon delivery by restoring the factory settings. All settings you made in the FRITZ!Box—including the configured Internet connection—are deleted when the factory settings are restored.
Do Not Disturb Do Not Disturb For every analog extension of the FRITZ!Box, the Do Not Disturb option can be enabled by telephone. When Do Not Disturb is set, the telephone connected to the extension will not ring. In configuring this function you can choose between enabling the function immediately or selecting a specific time period. Immediately When Do Not Disturb is enabled immediately, no incoming calls will be signaled at the specified extension.
Alarm Disabling Do Not Disturb r81s1s Disables Do Not Disturb for extension . r91ss Saves the settings. Alarm The telephones connected to the FRITZ!Box can be used for an alarm call. The alarm can be configured individually for each connected telephone. First enter on the telephone the time at which you would like to be awakened and save this entry. Then enable the alarm function. Example: The telephone should ring at 07:00 a.m. Enter the value “0700” as the
Call Forwarding on the ISDN Line Call Forwarding on the ISDN Line Call forwarding is performed by the ISDN operator’s switching station. To use call forwarding, FRITZ!Box must be connected to an ISDN line. Then this feature can be used to forward calls to an external line. Call forwarding is subject to charges by the carrier and cannot be used to forward calls to Internet numbers. In addition to call forwarding, there is also call diversion via the FRITZ!Box.
Call Forwarding on the ISDN Line Call Forwarding Immediately for All MSNs N Pick up the handset. s21ssr Dial the sequence shown at left. Q Wait for the acknowledgement tone. O Hang up the handset. Disabling Call Forwarding Immediately for Your Outgoing Caller ID N Pick up the handset. s21sr Dial the sequence shown at left. Q Wait for the acknowledgement tone. O Hang up the handset. Disabling Call Forwarding Immediately for Any MSN N Pick up the handset.
Call Forwarding on the ISDN Line Call Forwarding When Busy for Your Outgoing Caller ID N Pick up the handset. s67sr Dial the sequence shown at left. Q Wait for the acknowledgement tone. O Hang up the handset. Call Forwarding When Busy for Any MSN N Pick up the handset. s67s sr Dial the sequence shown at left. Q Wait for the acknowledgement tone. O Hang up the handset. Call Forwarding When Busy for All MSNs N Pick up the handset. s67ssr Dial the sequence shown at left.
Call Forwarding on the ISDN Line Disabling Call Forwarding When Busy for All MSNs Call Forwarding Delayed N Pick up the handset. s67ssr Dial the sequence shown at left. Q Wait for the acknowledgement tone. O Hang up the handset. Incoming calls are forwarded to the specified number if not answered at the number originally dialed within 20 seconds (about five rings).
Call Diversion Disabling Call Forwarding Delayed for Your Outgoing Caller ID N Pick up the handset. s61sr Dial the sequence shown at left. Q Wait for the acknowledgement tone. O Hang up the handset. Disabling Call Forwarding Delayed for Any MSN N Pick up the handset. s61ssr Dial the sequence shown at left. Q Wait for the acknowledgement tone. O Hang up the handset. Disabling Call Forwarding Delayed for All MSNs N Pick up the handset. s61ssr Dial the sequence shown at left.
Call Diversion number over your ISDN line’s second B channel and are subject to normal transmission charges. If the FRITZ!Box is operated on an analog telephone line, incoming calls can only be diverted to a different extension or to Internet numbers. Do not activate both call forwarding and call diversion at the same time. Note that only numerical Internet telephone numbers can be entered for diversion to an Internet telephone number.
Call Diversion Call Diversion When Busy N Pick up the handset. r43s /s Dial the sequence shown at left. r91ss Save your settings if desired by dialing the sequence shown at left. O Hang up the handset. Call Diversion After the Third Ring or When Busy N Pick up the handset. r44s /s Dial the sequence shown at left. r91ss Save your settings if desired by dialing the sequence shown at left. O Hang up the handset.
Call Waiting Call Waiting Call waiting can be switched on or off for each extension. Some older terminal equipment connected to extensions may misinterpret the call waiting signal. This is especially true of fax machines and modems. If communication errors occur, you should disable call waiting for fax and modem extensions. See the section “Waiting Calls” on page 89 for information about how to accept a call while another connection is active.
Suppressing Caller ID for Outgoing Calls (CLIR) Suppressing Caller ID for Outgoing Calls (CLIR) The CLIR (Calling Line Identification Restriction) function prevents your telephone number being displayed on the other party’s telephone during outgoing calls. The CLIR function is disabled in the factory settings. You have the option of enabling this function permanently and then disabling it again. CLIR can also be used for individual connections.
Displaying the Incoming Caller ID (CLIP) Displaying the Incoming Caller ID (CLIP) The CLIP (Calling Line Identification Presentation) function makes the number of callers—external and internal—visible on your telephone display. This feature is only effective if your telephone supports CLIP. The CLIP function is enabled in the factory settings. This function can be permanently disabled and enabled again. Enabling Display of Incoming Caller ID (CLIP) N Pick up the handset. r50
Disabling Automatic Outside Dialing Transmission of the connected line’s number can be switched on and off for each extension individually. Transmission of the connected line’s number is permanently enabled in the factory settings. Enabling Connected Line Identification Restriction (COLR) Permanently N Pick up the handset. r53s1s Dial the sequence shown at left. r91ss Save your settings if desired by dialing the sequence shown at left. O Hang up the handset.
Call Rejection on Busy (Busy on Busy) Disabling Automatic Outside Dialing N Pick up the handset. r1s0s Dial the sequence shown at left. r91ss Save your settings if desired by dialing the sequence shown at left. O Hang up the handset. Enabling Automatic Outside Dialing N Pick up the handset. r1s1s Dial the sequence shown at left. r91ss Save your settings if desired by dialing the sequence shown at left. O Hang up the handset.
Operation at the Telephone 9.4 Operation at the Telephone This section describes how you can use the FRITZ!Box features via your telephone keypad. Shortening the Dialing Procedure The FRITZ!Box automatically recognizes when a number has been entered, but not until a few seconds after the final digits are entered. You have the possibility of shortening the dialing procedure by closing your entry with the r key.
Making Internal Calls Selecting the Outgoing Number and the Type of Connection s111r fixed line. s12r Establishes a connection for this dialing procedure using the first Internet telephone number. s12r Establishes an Internet telephony connection via the specified Internet telephone number. For
enter the position of the Internet telephone number in the list of Internet telephone numbers.
Group Call Dialing Internal Calls without Automatic Outside Dialing N Pick up the handset. You hear the internal dial tone. Dial the desired extension number. for instance 1 or 2. For instance, enter ss1, to call the telephone at the analog extension “FON 1”. If you would like to call an ISDN terminal device for which you defined an internal phone number, dial the internal phone number of the device (for instance, 51).
Waiting Calls Waiting Calls When the “Call Waiting” feature is enabled and you are conducting a call, you will be notified as soon as an external call arrives on your your line. This call will be signaled by an acoustic signal in the handset. You can accept the connection with the new caller within 30 seconds. If you ignore the signal, the waiting call is rejected after 30 seconds. For instructions on how to enable and disable the function, see the section “Call Waiting” on page 81.
Call-Back on No Response (CCNR) on the ISDN Line Call-Back on Busy (CCBS) M You have just dialed a number and now you hear the busy signal. 5 If the call is not answered, within 20 seconds, dial either the number 5 or Rs37r the sequence shown at left. Q Wait for the acknowledgement tone. O Hang up the handset. K As soon as the subscriber you dialed hangs up, your telephone will ring. N Pick up the handset. The subscriber’s number is dialed again automatically.
Call-Back on No Response (CCNR) on the ISDN Line Enabling Call-Back on No Response (CCNR) M You have just dialed a number and hear a ring tone. 5 If the call is not answered, within 20 seconds, dial either the number 5 or Rs37r the sequence shown at left. Q Wait for the acknowledgement tone. O Hang up the handset. As soon as the party you dialed completes the conversation being conducted from her or his telephone, your telephone rings. N Pick up the handset.
Alternating Between Calls Alternating Between Calls Whenever you have one active connection and one caller on hold, you can switch from one call to the other as often as you want using the Hold button. Alternating Between Calls Call 1 You are talking to caller 1. P R Press the Hold button. Caller 1 is now on hold. M To establish a second call, simply dial ss plus the desired extension number for an internal call, or the desired external number.
Three-Party Conference Call Three-Party Conference Call FRITZ!Box allows you to hold telephone conferences with two other people at once. Two external and one internal party, or two internal and one external party can conduct a conference call with each other. Conducting a Three-Party Conference Call N Pick up the handset. M Dial the external number of the first party. Talk. R Press the Hold button.
Consultation / Hold Consultation / Hold The consultation/hold feature allows you to place an existing call on hold. You then may consult with someone else at your workplace or dial a second call. The party on hold does not hear the second conversation. Once you have finished the consultation, you can return to the original connection. Consultation / Hold Call 1 You are talking to caller 1. P R Press the Hold button. Caller 1 is now on hold and you can consult someone else.
Transferring Calls Transferring Calls The “call transfer” function allows you to transfer a connection from one of FRITZ!Box’s extension to another. Transferring Calls Call 1 You are talking to caller 1. P R Press the Hold button. Caller 1 is now on hold. ss To establish a connection to caller 2, dial the star key twice and then her or his extension number. Call 2 You can now talk with caller 2. P O To transfer the caller 1 to caller 2, simply hang up the handset.
Explicit Call Transfer (ECT) Explicit Call Transfer from a Three-Party Conference Call N Pick up the handset. M Dial the external number of the first party. Talk. R Press the Hold button. M Dial the number for your second external call. You can now conduct a second conversation while your first call is on hold. R3 Dial the sequence shown at left to begin a threeparty conference call. D Now all three participants can confer together.
One-Time Explicit Transfer on the ISDN Line One-Time Explicit Transfer on the ISDN Line Explicit Call Transfer (ECT) is an ISDN feature that must be enabled by your ISDN provider and thus usually is subject to extra charges. If ECT has not been enabled on your line, you can program the telephone system to initiate a onetime explicit call transfer before connecting to two parties. When you end the connection, the other two parties will be connected to each other.
Suspending/Resuming a Call on the ISDN Line Suspending/Resuming a Call on the ISDN Line The “suspend/resume” feature, also technically known as “terminal portability”, allows you to suspend an existing connection and resume it at another point on the S0 bus. The connection can be resumed at a different ISDN terminal device (such as an ISDN telephone) that is connected to your BRI line along with the FRITZ!Box. You will hear an acknowledgement tone to indicate that the call has been successfully suspended.
Room Monitoring (Baby Monitor) Room Monitoring (Baby Monitor) The following keypad sequence enables the function for monitoring the sound level in a room. First enter the volume level (a value between 1 and 8). Enter a telephone number. Do not hang up the handset! When the volume in the room reaches the specified level, the number you entered will be dialed. When the telephone rings and you pick up the handset, you will be connected with the telephone on which you enabled the room monitoring function.
Using Keypad Shortcuts Using Keypad Shortcuts The Keypad function allows you to control services and features on the telephone line by entering characters and strings on the telephone keypad. These keyboard entries are called keypad messages. Ask your telephone carrier for the specific keypad messages to access ISDN features. Entering Keypad Messages on an Extension with Automatic Outside Dialing N Pick up the handset. sr Dial the sequence shown at left.
Troubleshooting 10 Troubleshooting Help for Errors This chapter provides assistance if you are not able to open the user interface of your FRITZ!Box, if you are having problems with the WLAN connection, or if you want to change the IP settings on your computer. 10.1 Errors Opening the User Interface If an error message is returned when you open the user interface, this can have various causes. Check the possible causes and attempt to resolve the error.
Checking the Cable Connections Checking the Cable Connections The user interface of the FRITZ!Box does not appear in the window of your web browser. Possible Cause The cable connections are not secure. Remedy Make sure that all cable connections are plugged in securely. Checking the Name Resolution The user interface of the FRITZ!Box cannot be opened by entering fritz.box. Possible Cause The name resolution of the FRITZ!Box does not work. Remedy 1.
Checking the IP Address Checking the IP Address The user interface of the FRITZ!Box can be reached neither at the address fritz.box nor at 192.168.178.1. Possible Cause The IP address set on the connected computer is inapplicable. Remedy Set the network adapter to DHCP so that the IP address can be obtained via the DHCP server of the FRITZ!Box. Adjust the settings to those described in the section “Obtaining an IP Address Automatically” from page 115.
Disabling Online Operation Disabling Online Operation The user interface does not appear in the window of your web browser. Possible Cause The web browser is set for offline operation. Remedy Configure the web browser for online operation. Using the example of Internet Explorer 8: 1. Open the “Tools” menu. 2. If a checkmark is displayed in front of “Work Offline”, click this line. The checkmark will be removed and Internet Explorer will switch to online operation.
Checking the CGI Settings 4. Enter as “Exceptions”: fritz.box; 192.168.178.1; 169.254.1.1 and click “OK”. Checking the CGI Settings The user interface does not appear in the window of your web browser. Possible Cause The execution of CGI scripts is disabled in the web browser. Remedy Configure the web browser so that the execution of scripts is allowed in the user interface. Using the example of the Internet Explorer 8: 1. Select the “Security” settings page under “Tools / Internet Options...”. 2.
Checking the Security Software Checking the Security Software The user interface cannot be displayed in the web browser. Possible Cause Security software is blocking access to the user interface. Remedy Security software like firewalls can prevent access to the user interface of the FRITZ!Box. Configure exceptions for the FRITZ!Box in all of the enabled security software. If you would like to exit security software to test access to the FRITZ!Box, remove the DSL cable first.
The WLAN Adapter Cannot Find FRITZ!Box 4. Start your Internet browser and enter FRITZ!Box’s fixed IP address: 169.254.1.1 The FRITZ!Box user interface opens Once you have reached the FRITZ!Box user interface again, you should check the FRITZ!Box settings and correct them if necessary. 10.2 The WLAN Adapter Cannot Find FRITZ!Box If the “FRITZ!Box Fon WLAN 7390” radio network is not found by the WLAN adapter of a computer, work through the following steps to find the source of the error and resolve it.
Enabling WLAN Enabling WLAN The wireless network of the FRITZ!Box is not found by the WLAN adapter. Possible Cause WLAN is not enabled in the FRITZ!Box. If the “WLAN” LED on the FRITZ!Box is not lit up or is flashing, this means that WLAN is not enabled. Remedy Press the WLAN button on the FRITZ!Box. The “WLAN” LED begins flashing and then lights constantly. This means that the WLAN function is enabled.
Assigning Different Names to Wireless Networks in Parallel Operation Assigning Different Names to Wireless Networks in Parallel Operation Although the FRITZ!Box you are using provides two wireless radio networks in different frequency bands (2.4 and 5 GHz) at the same time, only one FRITZ!Box wireless network is displayed in your WLAN control software (for instance, in Microsoft WLAN Service WZC).
WLAN Connection Is Not Established 5. Click the “Apply” button. 6. Remove the network cable and try again to establish a wireless connection in the desired frequency band. 10.3 WLAN Connection Is Not Established Comparing the Security Settings for WLAN Make sure that the WLAN security settings registered in the FRITZ!Box agree with the security settings of the WLAN adapter. Here is how to view the WLAN security settings of the FRITZ!Box and print them out. 1.
Installing the Current Service Pack 2. Open the user interface in a web browser. Proceed as described in the section “Opening the User Interface” on page 28. 3. Go to the “WLAN / Security” menu and select “nonenctypted”. As a final step, click “Apply”. 4. Remove the network cable and try again to establish a connection. This non-secured condition should be used only for testing, to find out whether a WLAN connection is possible at all.
Changing the WLAN Connection of a FRITZ!WLAN USB Stick in FRITZ!WLAN Changing the WLAN Connection of a FRITZ!WLAN USB Stick in FRITZ!WLAN Using a FRITZ!WLAN USB Stick and AVM Stick & Surf technology, a computer was connected with a FRITZ!Box that can manage two wireless networks (2.4 and 5 GHz) at the same time. However, the wireless connection was not established in the desired frequency range (5 GHz, for instance), but in the alternative frequency range (2.4 GHz, for instance).
Ruling Out Interference Caused by Other Wireless Networks Ruling Out Interference Caused by Other Wireless Networks If there are other devices in the immediate vicinity of your FRITZ!Box that use the same frequency band, simultaneous use of frequencies can result in mutual interference (for example, fluctuations or interrupted connections).
Avoiding WLAN Channels with DFS 4. Enable the expert settings of the FRITZ!Box in the “System / Expert Mode” menu. Confirm by clicking “Apply”. 5. Select the “WLAN / Radio Channel” menu and then choose the frequency band whose channel settings you would like to change. 6. Select a different radio channel from the “Adjust radio channel settings” list. 7. Click the “Apply” button. 8. Remove the network cable and check whether interference continues to occur.
Obtaining an IP Address Automatically 10.4 Obtaining an IP Address Automatically The FRITZ!Box has its own DHCP server, which assigns IP addresses to the connected computers. The connected computers must be configured such that they can receive their IP addresses automatically. The steps for checking and adjusting this option differ among the operating systems. See the relevant section for your operating system. If FRITZ!Box is operated in a network, no other DHCP server may be activated in this network.
Obtaining an IP Address Automatically in Windows Vista Properties of the Internet protocol (TCP/IP) 7. Confirm your selection by clicking “OK”. Repeat steps 5 through 7 for the “Internet Protocol Version 6 (TCP/IPv6)” as well. The computer now receives an IP address from the FRITZ!Box. Obtaining an IP Address Automatically in Windows Vista 1. Click the “Start” button in the task bar and select the “Control Panel / Network and Sharing Center”. 2. From the “Tasks”, select “Manage network connections”.
Obtaining an IP Address Automatically in Windows XP 4. If the “User Account Control” window is displayed, click “Continue” in this window. 5. Under “This connection uses the following items”, select the “Internet Protocol Version 4 (TCP/IPv4)” entry and click “Properties”. 6. On the “General” tab, enable the options “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Properties of the Internet protocol (TCP/IP) 7. Confirm your selection by clicking “OK”.
Obtaining an IP Address Automatically in Mac OS X 4. On the “General” tab, enable the options “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Properties of the Internet protocol (TCP/IP) 5. Confirm your selection by clicking “OK”. The computer now receives an IP address from the FRITZ!Box. Obtaining an IP Address Automatically in Mac OS X 1. Select the “System Preferences” in the Apple menu. 2. In the “System Preferences” window, click the “Network” icon. 3.
Obtaining an IP Address Automatically in Linux Obtaining an IP Address Automatically in Linux For comprehensive information and tips on the topic of network settings in Linux, see, for example: http://www.tldp.org/HOWTO/NET3-4-HOWTO-5.
Removing 11 Removing Removing Software and Program Entries This chapter describes how to remove the FRITZ!Box from the computer and uninstall the corresponding software. 11.1 Disconnecting the FRITZ!Box from the Computer LAN Port If the computer is connected to one of the LAN ports on the FRITZ!Box, simply remove the network cable. If the computer is connected to the FRITZ!Box via a network hub or switch, remove the network cable between the FRITZ!Box and the network hub or switch.
Removing the Printer Port in Windows XP 3. Click the “Uninstall/Change” button. 4. Confirm the next query by clicking “Continue”. This concludes the uninstallation of the printer port. Removing the Printer Port in Windows XP 1. Open “start / Control Panel / Add or Remove Programs”. Make sure that the “Change or Remove Programs” button is selected in the column at left. 2. Select the “AVM FRITZ!Box USB Printer Port“ entry from the list of “Currently installed programs”. 3.
Product Details II PRODUCT DETAILS AND USEFUL INFORMATION 1 Product Details FRITZ!Box Fon WLAN 7390 This chapter provides you with product details on FRITZ!Box Fon WLAN 7390. You receive information on cables and adapters, technical data and further details. 1.1 Cable See the information in the following section on the individual cables and adapters on the FRITZ!Box Fon WLAN 7390. DSL/Telephone Cable Your FRITZ!Box Fon WLAN 7390 package may include only the DSL cable (see page 122).
Network Cable Remember that the quality of the line may be decrease as the distance from the central switching station increases. Network Cable Additional network cable is required if you would like to use all of the FRITZ!Box Fon WLAN 7390 network ports. The FRITZ!Box Fon WLAN 7390 network cable (yellow) is a standard category 5 (Cat5) Ethernet cable.
LEDs LED Condition Meaning Power/DSL on • FRITZ!Box on standby • the device has electrical power and the DSL line is ready for operation • the device has electrical power • the connection to DSL is being established or has been interrupted flashing Internet on a telephone connection to the Internet is active flashing there are messages in your mailbox (this function must be supported by your telephony carrier) Fixed Line on WLAN Info a telephone connection via the telephone line (ISDN
WLAN Button “Info” LED 1.3 Here you can define what additional information should be displayed on the “Info” LED. For details, see the “ System / “Info” Display” section of the user interface of your FRITZ!Box. WLAN Button The FRITZ!Box is equipped with a WLAN button.
DECT Button 1.4 DECT Button The FRITZ!Box is equipped with a DECT button. The DECT switch has two functions: • Ring to search for misplaced handsets (paging call) If you press the DECT button once briefly, the handset will ring. • Start the login procedure to register handsets How to register a DECT handset is explained in the section “DECT Function” from page 48. 1.5 Technical Specifications Ports and Interfaces • VDLS2/telephone port – VDSL modem in accordance with ITU standard G.993.
Router Function • WLAN Access Point with support for wireless networks – IEEE 802.11a – 54 Mbit/s – IEEE 802.11b – 11 Mbit/s – IEEE 802.11g – 54 Mbit/s – IEEE 802.11n – 300 Mbit/s Router Function • • • VDSL/ADSL router DHCP server Firewall with IP masquerading/NAT User Interface and Display • Settings and status messages via a web browser on a connected computer • Five LEDs indicate the condition of the device Physical Specifications • • • • • • • Dimensions (w x h x d) approx.
Declaration of CE Conformity 1.6 Declaration of CE Conformity The manufacturer AVM GmbH Alt-Moabit 95 D-10559 Berlin herewith declares that the product FRITZ!Box Fon WLAN 7390 ADSL/VDSL-WLAN router complies with the following directives: 1999/5/EC R&TTE Directive: Radio Equipment and Telecommunications Terminal Equipment 2009/125/EC EU directive: Ecodesign Requirements for Energy-using Products The following norms were consulted to assess conformity: - EN 60950-1:2011 - EN 55024:10.
Manufacturer’s Warranty 1.7 Manufacturer’s Warranty We offer a manufacturer’s warranty of 2 years for this original product. The warranty period begins with the purchase date from the first end user. Compliance with the warranty period can be proven by submission of the original invoice or comparable documents. This warranty does not restrict your warranty rights based on the contract of sale or other statutory rights.
Disposal 1.8 Disposal Electrical and electronic equipment must be disposed of separately from household waste. Labeling of electrical and electronic scrap In accordance with European regulations and the Electrical and Electronic Equipment Act (ElektroG), the FRITZ!Box Fon WLAN 7390, as well as all devices and electronic components contained in the FRITZ!Box Fon WLAN 7390 package, may not be disposed with household waste. Please bring these to your local collection points for disposal.
More about WLAN 2 More about WLAN WLAN (Wireless Local Area Network) is a radio technology that allows networks and access to the Internet to be provided without cable connections. This allows multiple users to share one wireless Internet connection. 2.1 Standards The WLAN standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n and IEEE 802.11i were developed by the Institute of Electrical and Electronic Engineers (IEEE). The standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g and IEEE 802.
Standards for the Throughput Rate Range The range within a WLAN is highly dependent on the following factors: • • • FRITZ!WLAN Repeater N/G the WLAN adapter used the structural conditions the amount of radio traffic on the same frequency band. Other wireless networks may be active, but also microwave ovens, baby monitors, game consoles, garage door openers, audio-video bridges, or Bluetooth transmitters (for instance, in mobile telephones.
Setting the Right Standard in the FRITZ!Box However, due to heavy use of the 2.4-GHz range, interference is more common than in the less-used 5-GHz range. IEEE 802.11n This standard allows for high throughput rates and ranges. The FRITZ!Box supports 802.11n in the 2.4-GHz frequency band, or, if desired, also in the 5-GHz frequency band. Modulation processes and antenna techniques like MIMO (Multiple Input, Multiple Output) use the entire frequency band available more effectively than the older standards.
Setting the Right Standard in the FRITZ!Box Note the following for the configuration of this setting: • Your FRITZ!Box Fon WLAN 7390 can make two WLAN networks available simultaneously for data transmission. One of the WLAN radio networks works in the 2.4-GHz frequency band, and the other in the 5-GHz frequency band. This means the FRITZ!Box can be implemented as an especially flexible access point for the various WLAN adapters and applications in your network.
Setting the Right Standard in the FRITZ!Box – 802.11g In this case set the WLAN standard for the 2.4-GHz frequency band to: “802.11b+g”. If the 5-GHz frequency band is not used, in order to reduce energy consumption you can disable it in the FRITZ!Box without losing WLAN connections. • Your radio network integrates only WLAN adapters that are compatible with one or both of the following standards: – 802.11n – 802.11g – 802.11b In this case set the WLAN standard for the 2.4-GHz frequency band to: “802.
The Standard for Security The Standard for Security IEEE 802.11i The WPA2 security mechanism is defined in the IEEE 802.11i standard. WPA2 is an extension of the familiar security mechanism WPA (Wi-Fi Protected Access). The main feature of the extension of WPA to WPA2 is the AES-CCMP encryption process. Mechanism Encryption WPA TKIP (Temporary Key Integrity Protocol) WPA2 TKIP AES-CCMP based on the extremely secure AES (Advanced Encryption Standard) procedure.
Encryption Encryption The most important security setting is encryption. FRITZ!Box supports the security mechanisms WEP (Wired Equivalent Privacy), WPA (Wi-Fi Protected Access) and WPA2 as follows: • As part of the WEP mechanism a static key is determined to serve for the encryption of the user data. Enter the key in the WLAN Security settings of the FRITZ!Box. All of the WLAN adapters in your wireless network must also use this key.
Encryption Recommendation If your WLAN adapter supports an encryption method that is more secure than the one preconfigured in the FRITZ!Box, you should select the more secure encryption method in your FRITZ!Box. To configure the best security settings possible with FRITZ!Box and your WLAN adapter, please note the following recommendations: • If your WLAN adapter supports WPA2 in accordance with the 802.11i standard: – Enable WPA encryption. – Select the WPA mode “WPA2 (CCMP)” or “WPA+WPA2”.
Wireless Network Name (SSID) Wireless Network Name (SSID) Your FRITZ!Box provides two wireless networks in different frequency bands (2.4 and 5 GHz) at the same time. Upon delivery, the name of both wireless networks (SSIDs) are set to “FRITZ!Box Fon WLAN 7390”. Because some WLAN control software, like that provided by Microsoft for Windows, cannot differentiate between the frequency band used, it will show only one of the wireless networks with this SSID as an available remote partner.
Frequency Ranges if channel 1 is selected for one WLAN, the channels 6 through 13 can be selected for a second WLAN. This maintains the minimum distance between channels. WLAN Autochannel With the WLAN Autochannel function, the FRITZ!Box automatically searches for the channel subject to the least interference.
Frequency Ranges For applications that rely on a steady, high throughput rate (“streaming”), you should use the 5-GHz frequency band. This radio band provides more channels, and these channels do not overlap, as well as experiencing significantly less external interference. For applications that require a low to normal throughput rate (for instance, reading and writing e-mail), use the 2.4GHz frequency band.
Frequency Ranges Allocation of the WLAN Channels in the 2.4-GHz Range Channel Frequency (GHz) Channel Frequency (GHz) 1 2.412 8 2.447 2 2.417 9 2.452 3 2.422 10 2.457 4 2.427 11 2.462 5 2.432 12 2.467 6 2.437 13 2.472 7 2.442 Allocation of the WLAN Channels in the 5-GHz Range Channel Frequency (GHz) Channel Frequency (GHz) 36 5.18 108 5.54 40 5.20 112 5.56 44 5.22 116 5.58 48 5.24 120 5.60 52 5.26 124 5.62 56 5.28 128 5.64 60 5.30 132 5.66 64 5.
Increasing the WLAN Range 2.4 Increasing the WLAN Range The range of a WLAN radio network also always depends on external influences. The following factors have an especially strong influence on the distance over which your FRITZ!Box can establish a stable, high-throughput wireless connection: • • • the WLAN adapter used structural conditions at your location the number of devices operating near the access point in the same frequency range.
Setting up a WDS other as a WDS repeater. The WDS base station and WDS repeater are connected to each other via WLAN. The WDS base station then can use the WDS repeater to reach even computers that would be located beyond its range without the WDS repeater.
Setting up a WDS • Make sure that all WLAN access points in the WDS use the same radio channel. • Every access point participating in the WDS fulfills the tasks of a WLAN access point for its given WLAN clients. This means that the WLAN clients see each WLAN access point with an individual name (SSID) and individual encryption settings.
Setting up a WDS 7. Select from the list of “WLAN Devices” the devices that are to be used as WDS repeaters. 8. In the “Security” area, define how the WDS repeater connection should be encrypted. Please note that the WPA2 encryption method is only available for AVM AVM devices. 9. Enter a network key. 10. Click “Apply”. The “Repeater Settings” you require to set up the WDS repeaters are displayed. 11. We recommend printing out these settings.
Setting up a WDS 4. Check under “WLAN / Radio Network” to make sure that the same frequency band is set as in the WDS base station. Click “Apply”. 5. Open “WLAN / WDS” and check the checkbox in front of the “WDS enabled” option. 6. Select the “Repeater” option as the operating mode. 7. Select from the “WLAN Devices” list the WLAN device that should be used as the WDS base station. 8.
WPS (Wi-Fi Protected Setup) 11. Click “Apply”. The “Repeater Settings” window now displays all of the settings you need to set up the WDS base station. Also displayed is the current IP address of the FRITZ!Box you just set up as a WDS repeater. You must enter this IP address in the web browser to open the FRITZ!Box user interface. 12. We recommend printing out these settings. This concludes the configuration of the FRITZ!Box as a WDS repeater.
WPS with the Push Button Method WPS with the Push Button Method The push-button method (WPS PBC) can be used if your WLAN adapter is also equipped with a WPS button, or if WPS can be enabled via the control software of the WLAN adapter. INFO WLAN Festnetz Internet Press the “WLAN” button on the FRITZ!Box and hold it down for at least six seconds. Power/DSL 1. Push for approx. 6 seconds 2.
WPS with the PIN Method 3. Open “WLAN / Security”. 4. Open the “WPS Quick Connection” settings page. 5. Select the option “PIN method (WPS-PIN), FRITZ!Box specifies the PIN”. 6. The PIN will be displayed. Enter this PIN in the control software of the WLAN adapter. 7. Click “Start WPS”. The “WLAN” LED on the FRITZ!Box flashes slowly, indicating that the WPS procedure has begun. Now a secure WLAN connection is being established between the FRITZ!Box and the WLAN adapter.
More about Networks 3 More about Networks The FRITZ!Box is delivered with preconfigured network settings. According to these settings, all network devices connected with the FRITZ!Box are located in a single network. The network settings can be changed and adapted to your conditions and needs. But you should do so only if you are well versed in networking technology. 3.1 • The Glossary explains concepts and terminology having to do with IP networks.
Network Overview There is an entry in the network overview for each user and each network device. The columns have the following meanings: Symbols The symbol in front of each name indicates whether the entry is a user or a network device. In the case of network devices the symbol also indicates whether the device is connected via a network (LAN) cable or wirelessly (via WLAN), Name This column displays the name under which the user or the network device is known to the FRITZ!Box.
Always assign the same IP address Always assign the same IP address The detailed view for network devices includes the setting “Always assign this network device the same IP address”. When this setting is enabled for a network device, the DHCP server of the FRITZ!Box will always assign the same IP address to this device each time the connection is established.
UPnP Settings The following addresses cannot be assigned becuase they are reserved for certain purposes: 3.3 192.168.178.1 is used by the FRITZ!Box itself 192168178254 reserved for internal use 192.168.178.255 broadcast address used to send messages into the network UPnP Settings The Universal Plug-and-Play (UPnP) service included in your FRITZ!Box provides status information about the FRITZ!Box to all connected computers.
Reserved IP Addresses • You want to connect the FRITZ!Box to the local IP network in order to make the FRITZ!Box features available to all of the computers in the IP network. Reserved IP Addresses The entire IP network 192.168.180.0 in the FRITZ!Box is reserved for internal purposes. IP addresses from this network may not be assigned to the FRITZ!Box. 3.5 DHCP Server The FRITZ!Box is equipped with its own DHCP server. The DHCP server is enabled by default in the factory settings.
Fixed IP Addresses When the DHCP Server Is Enabled Fixed IP Addresses When the DHCP Server Is Enabled If you would like to configure fixed IP addresses on individual computers connected with the FRITZ!Box despite the enabled DHCP server, please note the following: • The IP addresses must be from the IP network of the FRITZ!Box. • The IP addresses may not come from the address range of the DHCP server. • Each IP address can be assigned only once.
Disabling “All computers are located in the same IP network” Disabling “All computers are located in the same IP network” If you switch off the setting “All computers are located in the same IP network”, the interfaces of the FRITZ!Box will receive their own IP addresses. Factory Settings Upon delivery the interfaces of the FRITZ!Box are configured as follows: Interface IP Address Subnet Mask DHCP Server LAN 1 192.168.178.1 255.255.255.0 enabled LAN 2 like LAN 1 255.255.255.
Changing the Network Settings 3.7 Changing the Network Settings In order to change the network settings of the FRITZ!Box, the expert mode must be enabled in the user interface: 1. Start a web browser on your computer and enter fritz.box in the address field of the browser. 2. Click “Expert Mode” in the “System” menu, enable the setting “Show expert settings” and confirm this setting by clicking “Apply”. Here is how to change the network settings: 1. Select the “Home Network / Network” menu. 2.
More about Internet Telephony 4 More about Internet Telephony Voice over IP (VoIP) Internet telephony has already been in use for years, but today it allows even private customers the convenience familiar from conventional telephony, usually at significantly lower prices. Internet telephony has also made it considerably more convenient to use applications like conference calls and answering machines in networks.
More about: Virtual Private Network (VPN) 5 More about: Virtual Private Network (VPN) Via VPN a secure remote access to the network of the FRITZ!Box can be established. • • The VPN solution for the FRITZ!Box is based on the IPSec standard. • • Eight simultaneous active VPN connections are supported. • A free VPN client for individual computers can also be downloaded from the AVM web site.
Security through a VPN Local network B Local network A Tunnel Internet The terminals of the tunnels can be individual computers or entire networks. For instance, telecommuters or field staff can connect to the company network via VPN. The local network at a branch office can also be connected to the local network of company headquarters via VPN. Both of the locations securely connected over VPN must have an Internet connection at their disposal. 5.
Tunnel Technology The VPN tunnel fulfills these security requirements. The VPN tunnel is implemented using a tunnel protocol. 5.3 Tunnel Technology A tunnel is created by placing an IP packet to be transmitted inside of an additional, new IP packet. An IP packet is composed of the IP header and the user data. The IP header contains the IP address of the destination and the IP address of the sender. The original packet is encrypted and authenticated before repacking.
Supplementary Software for VPN IPSec is a tunnel protocol that offers state-of-the-art encryption procedures and can be integrated seamlessly into existing IP networks. The AES encryption algorithm is used in the FRITZ!Box VPN solution. AES is the most modern encryption algorithm. 5.4 Supplementary Software for VPN All of the information required for a VPN is saved in a configuration file. The terminals involved in any VPN must receive this file.
More about: Bandwidth Management and Prioritization 6 More about: Bandwidth Management and Prioritization Integrated bandwidth management ensures high speech quality for telephone calls over the Internet with the FRITZ!Box. The FRITZ!Box also offers a prioritization function that can be used to divide network applications and network devices into three different categories.
Categories for Prioritization • Change in the order in which packets are sent to the Internet (upstream direction) The order of the packets the FRITZ!Box receives from the Internet (downstream direction) cannot be changed. • Discard low-priority packets in order to ensure the transmission of higher-priority packets. This algorithm is used whenever more packets are supposed to be sent to the Internet than the upstream transmission rate of the Internet connection alllows.
Categories for Prioritization – Whenever Internet telephony is included in this category, this application always has the highest priority, even over other real-time applications. • Prioritized applications This category is suitable for applications that require a fast reaction time (for example, company access, terminal applications, games).
Categories for Prioritization In order to use prioritization, the Expert Mode must be enabled in the user interface of the FRITZ!Box. 1. Start a web browser on your computer and enter fritz.box in the address field of the browser. 2. Click “Expert Mode” in the System menu, enable the setting “Show expert settings” and confirm this setting by clicking “Apply”. The “Prioritization” menu is located under “Internet”.
More Functions 7 More Functions This chapter introduces additional useful functions and features of the FRITZ!Box. 7.1 Child Protection The child protection feature in the FRITZ!Box allows you to specify when and for how long individual computers or Windows users may use the Internet. For instance, you can define that your children are allowed to use the Internet connection only on weekdays between 4:00 p.m. and 8:00 p.m., and then only for one hour.
Energy Monitor The energy consumption is shown as a percentage. The maximum power consumption value of the FRITZ!Box is the amount of energy used when all functions are in operation. The “Energy Monitor” page shows the following: • FRITZ!Box System Overall This graph shows how much energy all of the FRITZ!Box functions are using at the moment, and how much they use in total on an average day. When all functions and modules are working at capacity, this value equals 100%.
Push Service E-mail 7.3 Push Service E-mail With push service you can specify that the FRITZ!Box sends you e-mail messages with status and consumption data at regular intervals. The e-mail contains a table with the overview of your FRITZ!Box connections. The call list is also sent as a file in csv format. The file can then be opened and evaluated statistically with appropriate software like a spreadsheet program. The push service mail is set up in the “System / Push Service” menu. 7.
Night Service • Do Not Disturb When this setting is selected, the telephones connected with the FRITZ!Box will not ring. This setting does not apply to the IP telephones. They are connected with the FRITZ!Box either by means of a network cable or via WLAN. The Do Not Disturb setting is not applied to IP telephones. If you connected a fax machine to the FRITZ!Box, this device is disabled during night service. The Do Not Disturb setting has no effect on the fax function integrated in the FRITZ!Box.
Customer Service Guide 8 Customer Service Guide Help on All Important Service Topics AVM is here to help should any questions or problems arise. Here you will find the important information you need, in the form of frequently asked questions (FAQs), manuals, updates and support. Microsoft Updates In many cases problems that arise during operation can be resolved by installing the current Microsoft Service Pack or other Microsoft updates.
Updates and Software 8.3 Updates and Software FRITZ!Box provides firmware updates and additional software you can use with your FRITZ!Box free of charge. Firmware Use the “Update Firmware” wizard on the FRITZ!Box user interface to perform an update of your firmware. Programs The latest software is also available for download at the following address: www.avm.de/en/download FTP Experienced users can also download updates from the AVM FTP server.
Support by E-mail Please take advantage of the information sources described above before contacting AVM support. Support by E-mail You can send us an English-language e-mail request at any time using the “Service” area of our web site. The “Service” area can be reached at: www.avm.de/en/service Select the product for which you need support from the “Support” area. Click the “Mail Form” link to open the email form. Fill out the form in English and send it to AVM by clicking the “Send” button.
Glossary Glossary ADSL abbreviation for Asymmetric Digital Subscriber Line ADSL (G.992.1/G992.2) was developed on the basis of DSL technology in order to satisfy the increasing demand for higher throughput rates during uploading and downloading. designates a fast kind of data transmission that works with standard copper cables and transports signals in both directions at different speeds (upstream at 640 Kbit/s and downstream at up to 9 Mbit/s).
Glossary ADSL2+ offers a doubled frequency range used for downstream transmission, and thus double the maximum bandwidth achievable for downstream to 24 Mbit/s. ADSL2+ is completely downward compatible, meaning that terminal equipment compliant with ADSL and ADSL2 can also be operated on ADSL2+ lines, although they cannot exploit the advantages of ADSL2+. ADSL-Controller An ADSL-Controller is an electronic hardware module that allows a computer to access an ADSL line.
Glossary DNS server to be used and of the default gateway. In assigning the IP addresses the DHCP server selects from a prescribed range of IP addresses. DNS abbreviation for Domain Name System Domain Name Service takes care of determining the IP address for a given domain name. This Domain Name Service runs on every computer. It accepts the domain name entered by a user and inquires about the corresponding IP address at a DNS server known to the service.
Glossary DDNS abbreviation for Dynamic Domain Name System DDNS is a service which allows a computer always to be reached under the same domain name despite constantly changing public IP addresses. This means the home network can always be reached from the Internet, regardless of the user’s location. Even private users have an economical way of placing their own Internet offers on their computer at home.
Glossary Assigning fixed IP addresses makes sense in cases where a local network has a sufficiently large pool of IP addresses available, or when a computer is always supposed to be accessible at a certain address (such as a web server or e-mail server). Firewall A firewall protects a computer or local network against attacks from the Internet.
Glossary Gateway Gateway is a general term designating an interface between two networks. Such a network interface can be realized using a router or a bridge, for instance. If a computer wants to transfer data packets to a computer in another network, it must first transmit the packet to the gateway. To do this, the computer must know the address of the gateway.
Glossary IP address In IP-based networks, for instance in the Internet and local networks, all connected devices are addressed via their IP addresses. So that data packets are sure to be delivered to the right address, each IP address may be assigned only once within the Internet or a local IP network. The IP address consists of four three-digit groups of numbers (for instance, 192.168.178.247). Each group of numbers can assume values between 000 and 255.
Glossary Properties of IP Address Classes Every IP address consists of two parts: the network address and the host address. The sizes of the network address and the host address are variable, and determined by the first four bits (of the first byte) of the IP address. IP masquerading IP network NAS functionality By means of IP masquerading a computer or LAN can be protected from unauthorized connection requests from the Internet.
Glossary own public IP address in all outgoing data packets. The router saves all necessary information in a table so that incoming data packets can then be assigned to the correct network device. Outside dialing prefix The outside dialing prefix is the digit dialed at an extension line to obtain an outside line. Generally this is “0”. Public IP address A public IP address is an IP address valid in the Internet.
Glossary services. This is also a way of preventing any Trojans that may have infected your computer from receiving data on ports it created as means of accessing your computer for potentially damaging activities. A firewall blocks most of the atypical port numbers not required for normal operation of an application and offers specialized users the opportunity to forward specified ports.
Glossary Stick & Surf Stick & Surf is a technique developed by AVM for the fast, simple, error-free and secure configuration of radio networks. This technique allows for the straightforward transmission of all important parameters of a radio network from the access point to any computer that is to be added to the radio cell.
Glossary Example 1 Network address of the subnet: 192.168.178.0 Address of the computer in the 192.168.178.247 subnet: IP address pool in the subnet: 192.168.178.0 192.168.178.255 The IP addresses 192.168.178.0 and 192.168.178.255 are reserved. This means that the addresses from 192.168.178.1 to 192.168.178.254 are available for assignment to the computers. Therefore a maximum of 254 computers can be included in the subnetwork. Example 2 IP address: 192.168.178.247 Subnet mask: 255.255.0.
Glossary TCP/IP abbreviation for Transmission Control Protocol / Internet Protocol TCP/IP is the “language” of the Internet. TCP/IP is used to refer to a suite of protocols used for data communication over the Internet. TCP and IP are the network and transport protocols underlying most Internet services, including file transfer (FTP) and e-mail communication (SMTP). TCP/IP is available for practically all computer systems.
Glossary The high throughput rates make it possible to support multimedia services. With special cards or USB sticks the Internet connection can also be provided for laptops or computers via UMTS. Update A more recent version of software or firmware is called an update. Updates are often free of charge, resolve minor programming errors, and sometimes also offer new functions. Upload This term designates the procedure of transmitting files from one’s own computer to another computer in the Internet.
Glossary VDSL abbreviation for Very High Speed Digital Subscriber Line In Germany, the DSL technology VDSL is increasingly becoming available in the VDSL2 (G993.2) version. VDSL2 is a further development of the ADSL2+ standard, to which it is fully downward compatible. The standard provides for throughput rates of up to 100 Mbit/s for uploading and downloading, but requires a distribution network with a more closely meshed infrastructure—a demand that is hardly economical outside of major urban areas.
Glossary VoIP abbreviation for Voice over IP, also known as Internet telephony Voice over IP makes telephone calls possible via the Internet. The technology has already been in use for years, but today it allows even private customers the convenience familiar from conventional telephony, usually at significantly lower prices. VoIP has also made it considerably more convenient to use applications like conference calls and answering machines in networks.
Glossary wireless structure. A further useful purpose for WLAN technology is to link segments of existing cable-connected networks.
Index Index A access rights USB storage . . . . . . . . . . . . . . . . . 53 user interface . . . . . . . . . . . . . . . . 30 acknowledgment tone . . . . . . . . . . . . 68 adapter WLAN . . . . . . . . . . . . . . . . . . . . . . 18 alarm. . . . . . . . . . . . . . . . . . . . . . 38, 73 alternating between calls . . . . . . . . . 92 analog telephone line . . . . . . . . . . . . 22 answering machine integrated. . . . . . . . . . . . . . . 35, 39 operating via telephone keypad . 39 setting up . . . . . . .
Index D declaration of CE conformity . . . . . . 128 DECT button . . . . . . . . . . . . . . . . . . . 126 DECT function base station . . . . . . . . . . . . . . . . . 48 CAT-iq . . . . . . . . . . . . . . . . . . . . . . 49 disabling . . . . . . . . . . . . . . . . . . . 50 enabling . . . . . . . . . . . . . . . . . . . . 50 GAP . . . . . . . . . . . . . . . . . . . . . . . . 49 DECT telephones finding . . . . . . . . . . . . . . . . . . . . . 50 logging off . . . . . . . . . . . . . . . . . .
Index H help customer service . . . . . . . . . . . . 172 service team. . . . . . . . . . . . . . . . 173 troubleshooting . . . . . . . . . . . . . 101 hold function . . . . . . . . . . . . . . . . . . . 94 HSPA mobile telephone network . . . . . 46 hub network . . . . . . . . . . . . . . . . . . . . 17 USB. . . . . . . . . . . . . . . . . . . . . . . . 63 I icons in the manual. . . . . . . . . . . . . . . . . 7 operation by telephone . . . . . . . . 69 imprint . . . . . . . . . . . . . . . . . . . .
Index N P network changing settings . . . . . . . . . . . 158 connecting . . . . . . . . . . . . . . . . . . 16 factory settings . . . . . . . . . . . . . 153 hub/switch. . . . . . . . . . . . . . . . . . 17 IP settings . . . . . . . . . . . . . . . . . 153 overview . . . . . . . . . . . . . . . . . . . 151 prioritization . . . . . . . . . . . . . . . 164 settings . . . . . . . . . . . . . . . . . . . 151 UPnP settings. . . . . . . . . . . . . . . 154 network cable. . . . . . . . . . . . . . . . . .
Index R T radio network name. . . . . . . . . . . . . 139 recovery electrical equipment . . . . . . . . . 130 electronic equipment . . . . . . . . 130 recycling . . . . . . . . . . . . . . . . . . . . . . 130 remote access see VPN . . . . . . . . . . . . . . . . . . . 160 repeater FRITZ!WLAN Repeater N/G. . . . . 143 WDS . . . . . . . . . . . . . . . . . . . . . . 143 requirements for operation . . . . . . . . 12 rings . . . . . . . . . . . . . . . . . . . . . . . . . . 70 room monitoring . . . . . . . .
Index USB devices connecting . . . . . . . . . . . . . . . . . . 51 FRITZ!WLAN USB Stick . . . . . . . . . 52 media server . . . . . . . . . . . . . . . . 54 network sharing . . . . . . . . . . . . . . 52 tips for use . . . . . . . . . . . . . . . . . . 66 USB card reader . . . . . . . . . . . . . . 64 USB hard drive . . . . . . . . . . . . . . . 53 USB hub . . . . . . . . . . . . . . . . . . . . 63 USB modem . . . . . . . . . . . . . . . . . 51 USB printer. . . . . . . . . . . . . . . . . . 55 USB stick .
