Operating Instructions and Installation Instructions

Making Telephone Calls with Convenience Functions
FRITZ!Box 7330 97
Accepting or Rejecting Waiting Calls on an Analog
Extension of the FRITZ!Box
When the “call waiting” function is switched on, you hear a
signal whenever you receive an external call during an active
telephone conversation. You can then accept the call within
30 seconds. If you do not accept the call, it will be rejected.
You can enable and disable the “call waiting” function in the
FRITZ!Box user interface in the menu “Telephony / Telephony
Devices”.
Accepting Waiting Calls on Other Telephones
When making calls with a cordless DECT telephone registered
on the FRITZ!Box, you can accept waiting calls using the tele-
phone menu.
Alternating Between Calls
During a telephone call you can establish a connection to a
second party. You can alternate between the two parties as
often as you like.
Accepting or Rejecting Waiting Calls on an Analog Extension
R2 Use this keypad sequence to accept a waiting call.
The first call is on hold.
If you would like to end the first call, hang up the re-
ceiver. As soon as you have hung up your telephone
will ring. When you pick up the receiver, you will be
connected with the waiting call.
R1 If the first call was on hold, you can return to the
first call using this keypad sequence.
R0 With this keypad sequence you can reject a waiting
call.