Operating Instructions and Installation Instructions

FRITZ!Box 7330 78

WLAN—Getting Technical

Setting the Right Standard in the FRITZ!Box

The throughput rate that can be achieved in your WLAN radio

network depends on the WLAN standards used by the inte-

grated WLAN devices. These WLAN standards must also be

set in the FRITZ!Box. Proceed as follows to check which WLAN

standards are set and change them if needed:

1. Open the FRITZ!Box user interface.

2. Enable the advanced view.

3. Open the “WLAN / Radio Channel” menu and select “Ad-

just radio channel settings” to make the desired chang-

es.

Make a note of which standards the WLAN devices in your

network are compatible with and then adjust the FRITZ!Box

settings according to the following information:

• Your radio network integrates only WLAN devices that

are compatible with one or both of the following stan-

dards:

802.11n

802.11g

Set the following mode in the FRITZ!Box:

Mode: 802.11n+g

The 2.4-GHz frequency band will be used.