Operating Instructions and Installation Instructions

Mobile Nnetwork: Replacing Faulty DSL
FRITZ!Box 7330 69
Setting Up IPv6 on the Computer
You can establish connections in the IPv6 range of the Inter-
net only if IPv6 is installed and enabled on the computers in
your home network.
• IPv6 is already installed and enabled in the Windows 7
and Windows Vista operating systems.
• IPv6 is not installed and enabled in standard
Windows XP. You must install and enable IPv6 in order to
use it. The IPv6 installation requires Service Pack 2 for
Windows XP.
• IPv6 has been available in the Mac OS X operating sys-
tems since Mac OS 10.
12.10Mobile Nnetwork: Replacing Faulty DSL
Internet access over the mobile telephone network can be set
up so that the mobile telephone connection is established
automatically whenever the DSL connection fails. This guar-
antees Internet access even when the DSL connection is
missing. A USB modem for mobile Internet access
(UMTS/HSPA) and a SIM card from a mobile communications
provider are required for this. The FRITZ!Box supports
UMTS/HSPA modems from various manufacturers.
Here is how to set up the mobile telephone connection as a
substitute upon DSL failure:
1. Insert the USB modem in the USB port on the FRITZ!Box.
2. Open the FRITZ!Box user interface (see page 31).
In the “Internet” menu, the sub-menu “Mobile Tele-
phone Network” is displayed.
3. Select the setting “Automatically enable the mobile con-
nection when the DSL connection is disrupted”.
The “Mobile Telephone Network” menu is not available
until the UMTS/HSPA modem has been connected to the
USB port of the FRITZ!Box.