Operating Instructions and Installation Instructions

Configuring Connected Telephones and Terminal Devices
FRITZ!Box 7330 49
9.2 Configuring Connected Telephones and Terminal Devices
Once you have entered your telephone numbers, configure all
of the connected telephones and other terminal devices in
the FRITZ!Box. In the process you must define, depending on
the type of device:
• The telephone number the terminal device uses to place
outgoing calls to the public telephone network.
• Telephone numbers for accepting calls. A telephone can
be set to ring for all incoming calls or only for calls to cer-
tain telephone numbers.
• Internal name for the terminal device. This name will be
displayed, for instance, in the call list of the FRITZ!Box.
Setting Up Telephones and Terminal Devices with the Wizard
1. Open the FRITZ!Box user interface (see page 31).
2. Click “Wizards” in the menu.
3. Click “Manage Your Telephony Devices”.
The telephones and other terminal devices that have al-
ready been configured are displayed in the user inter-
face.
4. To set up a new terminal device, click “Configure New
Device”. Follow the wizard’s instructions.
Click the “Edit” button to open the settings of a ter-
minal device.
Editing or Deleting Telephones and Terminal Devices
All telephones and other terminal devices you set up in the
FRITZ!Box are listed under “Telephony / Telephony Devices”
in the user interface.
Here you can edit the settings of terminal devices and delete
terminal devices.