Operating Instructions and Installation Instructions

Connecting to the Internet
FRITZ!Box 7330 21
Connecting to the Internet via the Mobile
Communications Network
If no other kind of Internet connection is available, you can
use your FRITZ!Box to connect to the Internet via the mobile
communications network. A USB modem for mobile Internet
access (UMTS/HSPA) is required for this.
1. Insert the USB modem into the USB port on the
FRITZ!Box.
2. Set up the Internet connection via the mobile communi-
cations network (see page 38).
Connecting with a Router/Network
You can use the FRITZ!Box at an already existing Internet ac-
cess. For this the FRITZ!Box is not connected to the DSL line,
but to the router or network.
Connecting Using a Network Cable
Connect the FRITZ!Box to the router with a network cable.
1. Insert one end of the cable into the socket on the
FRITZ!Box labeled “LAN 1”.
2. Insert the other end of the cable into a network socket
on the router or in the network.
Once you have connected a computer to the FRITZ!Box, you
can configure the Internet connection as described in section
Configuring the Internet Connection over LAN 1: FRITZ!Box as
a Router on page 39.
The FRITZ!Box supports UMTS/HSPA modems from various
manufacturers.