Operating Instructions and Installation Instructions

FRITZ!Box 7330 20

Connecting to the Internet

Connecting to a DSL Line with Fixed Line

Connecting to the DSL splitter

If you have a DSL line and a line to the fixed-line telephone

network, then connect the FRITZ!Box as follows:

1. Connect the long, gray end of the DSL/telephone cable

to the socket on the FRITZ!Box labeled “DSL/TEL”.

2. Connect the short end of the cable to the DSL socket of

the DSL splitter.

The “Power / DSL” LED lights up after a short time to signalize

that the FRITZ!Box is ready for Internet connections.

Connecting with a Cable Connection

With an additional cable modem you can also use your

FRITZ!Box 7330 on a cable connection. Use a network cable.

1. Connect the free end of the network cable to the LAN

(Ethernet) port on the cable modem.

2. Connect the other end of the network cable to the socket

on the FRITZ!Box labeled “LAN 1”.

3. Connect a computer with the FRITZ!Box either wirelessly

via WLAN or using a network cable (see page 23).

4. Set up the Internet connection for connections via cable

in the FRITZ!Box (see page 38).

INFOINFO

WLANWLAN

FestnetzFest

netz

InternetIntern

PowerP

owe

/ DSLDSL