Operating Instructions and Installation Instructions

FRITZ!Box 7330 12
LEDs
2.3 LEDs
Five LEDs are built into the top of the FRITZ!Box 7330, which flash
or light up to display various connection statuses and events.
LED Condition Meaning
Power /
DSL
on
• Device has electrical power and the DSL line is ready
flashing
• Device has electrical power and the connection to DSL is
being established or has been interrupted
Internet on Telephone connection to the Internet is active
flashing Messages in your mailbox (this function must be supported
by your telephony provider)
Fixed
Line
on Telephone connection to the fixed-line network is active
flashing Messages in your mailbox (this function must be supported
by your telephony provider)
WLAN on WLAN function is enabled
flashing
• Switching the WLAN function on or off
• Adopting the WLAN settings
• Performing WPS
• WPS procedure aborted: More than two WLAN devices
are performing WPS at the same time. Repeat the WPS
procedure.
Info on
• Free telephone connection between two Internet tele-
phony subscribers is active (this function must be sup-
ported by your Internet telephony provider)
• The LED signals an event specified in the user interface
under “System / “Info” Display”
• Stick & Surf procedure with FRITZ!WLAN USB Stick from
AVM concluded
flashing
• Updating FRITZ!OS, the firmware of your FRITZ!Box
• New messages on the FRITZ!Box answering machine,
online meter reached the defined value, or another
event defined in the user interface under “System / “In-
fo” Display” is signaled
• Stick & Surf procedure with FRITZ!WLAN USB Stick from
AVM in progress
• Registration procedure for a DECT handset in progress
flashing red Error: Open the FRITZ!Box user interface and follow the in-
structions on the “Overview” page