Operating Instructions and Installation Instructions

Do Not Disturb
FRITZ!Box 7272 121
16.8 Do Not Disturb
Do Not Disturb keeps a telephone from ringing at specified
times. Calls you miss then appear in the FRITZ!Box call list.
Configuring Do Not Disturb
1. Open the FRITZ!Box user interface; see page 33.
2. Select “Telephony / Telephony Devices”.
3. Click the “Edit” button to open the settings of a tele-
phone:
4. Switch to the “Do Not Disturb” tab and configure the Do
Not Disturb settings.
5. Click “OK” to save the settings.
16.9 Alarm
When you configure an alarm, your telephone rings at the
specified time.
Configuring the Alarm
1. Open the FRITZ!Box user interface; see page 33.
2. Select “Telephony / Alarm”.
3. Enable the alarm and enter a time.
4. Select which telephone should ring at the specified
time.
5. Define here whether the alarm should be repeated.
6. Click “Apply” to save the settings.
The alarm is configured and enabled.