Operating Instructions and Installation Instructions

LEDs
13
WLAN Button
With the WLAN button you can turn the WLAN function on and
off and connect wireless devices with the FRITZ!Box by WPS.
WPS is an easy way to establish secure wireless connections
(see page 25).
DECT Button
With the DECT button you can register cordless telephones on
the FRITZ!Box (see page 34) and page misplaced cordless
handsets (see page 83).
1.5 LEDs
LED Condition Meaning
Power /
LTE
on
• FRITZ!Box on standby
• Device has electrical power and the LTE connection has
been established
flashing
• Device has electrical power
• LTE connection is being established or has been inter-
rupted
Phone on Telephone connection to the Internet active
flashing Messages in your voicemail/e-mail inbox (this function
must be supported by your telephony provider)
DECT on DECT function enabled
flashing Registration procedure for a DECT handset in progress
WLAN on WLAN function enabled
flashing
• Enabling or disabling WLAN function
• Adopting the WLAN settings
FB6840LTE-e2.fm Seite 13 Dienstag, 29. Mai 2012 5:34 17