Operating Instructions and Installation Instructions

102
Sharing a USB Printer
8. Select the “Custom” option and click “Settings...”, then
“Next”.
9. Enable the “Raw” option.
10. Enter “9100” in the “Port Number” field and click “OK”.
11. Click “Next” and confirm with “Finish” and “Close”.
12. In the “[Printer name] properties” window, switch to the
“Ports” tab.
13. Disable the “Enable bidirectional support” option and
click “Apply”.
The USB printer has been configured and can be used as a
network printer.
Setting Up a USB Printer in Mac OS 10.5
1. Click in the dock on “System settings”.
2. Click “Print & Fax”.
3. Click the “+” sign.
4. Click “IP Printer”.
5. In the “Protocol” drop-down list, select the entry “HP Jet
Direct – Socket”.
6. Enter “fritz.box” in the “Address:” input field.
7. In the “Print Using:” drop-down list, select the printer
that is connected to the USB port of your FRITZ!Box.
8. Click “Add”.
The USB printer has been configured and can be used as a
network printer.
If the FRITZ!Box is configured as a WDS repeater or as an
IP client, enter here the IP address at which the
FRITZ!Box can be reached within the network.
If the printer is not displayed, you must first install the
printer drivers for this device. Consult the documenta-
tion of your printer for instructions.
FB6840LTE-e2.fm Seite 102 Dienstag, 29. Mai 2012 5:34 17