Operating Instructions and Installation Instructions

FRITZ!Box 6810 LTE 10
LEDs
2.3 LEDs
“Info” LED
You can define what additional information should be dis-
played on the “Info” LED. For details, see the “System / “Info”
Display” area of the FRITZ!Box 6810 LTE.
LED Condition Meaning
Info on
• Signals an event specified by the user
flashing
• Updating FRITZ!OS, the firmware of your FRITZ!Box
• Specified value for online meter reached
• Signals an event specified by the user
flashing red Error: Open the FRITZ!Box user interface and follow the in-
structions on the “Overview” page
Phone on Telephone connection to the Internet is active
flashing Messages in your voicemail/e-mail inbox (this function
must be supported by your telephony provider)
WLAN on WLAN function enabled
flashing
• Enabling or disabling WLAN function
• Adopting the WLAN settings
• Performing WPS
• WPS procedure aborted: More than two WLAN devices
are performing WPS at the same time. Repeat the con-
nection routine.
DECT on DECT function enabled
flashing Registration procedure for a DECT handset in progress
Power/LTE on
• FRITZ!Box on standby
• Device has electrical power and the LTE connection has
been established
flashing
• The device has electrical power
• The LTE connection is being established or has been in-
terrupted