FRITZ!Box 6810 LTE Installation and Operationn www.avm.de © AVM GmbH · Alt-Moabit 95 · 10559 Berlin · Telefon 030 39976-0 · info@avm.
Table of Contents Symbols and Highlighting . . . . . . . . . . . . . . . . . . . . . . . . 6 1 The FRITZ!Box 6810 LTE . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Ports, Interfaces, Buttons and LEDs . . . . . . . . . . . . . . . . 8 2.1 2.2 2.3 Ports and Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 LEDs . . . . . . . . . . . . . . . . . . .
8 Configuring an Internet Connection Into the LTE Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 9 Connecting Telephones and Other Terminal Devices . . 32 9.1 9.2 9.3 Registering FRITZ!Fon and Other Cordless (DECT) Telephones . . . . 32 Registering Smartphones with FRITZ!App Fon . . . . . . . . . . . . . . . . . 33 Connecting an IP Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 10 Setting Up the FRITZ!Box for Telephone Calls . . . . . . . .
15 FRITZ!Box as a Telephone System . . . . . . . . . . . . . . . . . 67 15.1 15.2 15.3 15.4 15.5 15.6 15.7 15.8 15.9 15.10 FRITZ!Box Telephone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 The FRITZ!Box Call List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Setting Up FRITZ!Box Fax Reception . . . . . . . . . . . . . . . . . . . . . . . . . 69 Setting Up Call Diversion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21 Taking FRITZ!Box out of Operation . . . . . . . . . . . . . . . . 110 21.1 21.2 21.3 Removing the SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Restoring Factory Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Uninstalling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 22 Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . 112 22.1 22.2 22.3 22.4 22.5 Ports and Interfaces. . . . .
Symbols and Highlighting Symbols and emphasized text are used to mark certain information in this manual. Symbols This symbol marks useful hints and tips. This symbol indicates important instructions that must be observed to avoid malfunctions.
The FRITZ!Box 6810 LTE 1 The FRITZ!Box 6810 LTE Welcome! We are pleased you decided on a FRITZ!Box. The FRITZ!Box 6810 LTE is the hub of your home network, connecting your computers and network devices with the Internet. For fast Internet connections the FRITZ!Box uses the mobile communications standard LTE. The FRITZ!Box supports the radio technologies WLAN and DECT.
Ports, Interfaces, Buttons and LEDs 2 Ports, Interfaces, Buttons and LEDs This chapter describes the ports, interfaces, buttons and LEDs of the FRITZ!Box. 2.1 Ports and Interfaces LTE LTE radio network WLAN No Notebook, computer, smartphone, vid video/TV streaming DECT DE CT FRITZ!Fon or other DECT telephone LAN Co Computer, game console, ne network 2.
Buttons 2.2 Buttons The FRITZ!Box has two buttons on the back of the device. WLAN WLAN LAN LAN DECT DECT FRITZ!Box buttons “WLAN” Button With the “WLAN” button you can turn the WLAN function on and off and connect wireless devices with the FRITZ!Box by WPS. WPS is an easy way to establish secure wireless connections (see page 19). “DECT” Button With the “DECT” button you can register cordless telephones on the FRITZ!Box (see page 32) and page misplaced cordless handsets (see page 82).
LEDs 2.
LTE: Radio Standard for Connecting to the Internet 3 LTE: Radio Standard for Connecting to the Internet LTE (Long Term Evolution) is a radio standard specified according to the 3GPP standard, Release 8. Within this standard the FRITZ!Box belongs to category 3 UE (user equipment). Frequency Ranges FRITZ!Box 6810 LTE supports two frequency bands: • 791 - 862 MHz: the LTE band 20 is located in this range. This band is called the “digital dividend” spectrum.
Before You Connect the FRITZ!Box 4 4.1 Before You Connect the FRITZ!Box • Check the contents of your FRITZ!Box package. See the section Contents of the FRITZ!Box Package on page 12 for more information. • Make sure that the requirements for connecting and operating the FRITZ!Box have been met. See the section Requirements for Operation on page 12 for more information. • Please see the security and handling instructions in the section Security and Handling on page 13.
Security and Handling 4.3 Security and Handling Before installing and using the FRITZ!Box, please read the following security and handling instructions. Safety Instructions When connecting the FRITZ!Box 6810 LTE, be sure to observe the following security instructions in order to protect yourself and the FRITZ!Box from harm. • Avoid overloading power outlets, extension cables and socket strips. Overloaded power supply components present a fire and electrocution risk.
Security and Handling Handling the FRITZ!Box • Place the FRITZ!Box in a dry location that is free of dust and protected from direct sunlight. • When connecting the FRITZ!Box to your computer using a network cable, keep in mind that the cable can be no longer than 100 m. • Use the alignment aid of the FRITZ!Box to determine the best possible position of the FRITZ!Box for LTE reception.
Connecting the FRITZ!Box 5 Connecting the FRITZ!Box • • Insert the SIM card. Connect the FRITZ!Box to the power supply. This chapter tells you how. Before you connect the FRITZ!Box, note the additional instructions in the section Security and Handling on page 13. 5.1 Inserting the SIM Card DECT Power/LTE WLAN Phone Info You received a SIM card from your LTE provider. This card must be inserted into the SIM card slot on the FRITZ!Box.
Connecting to Electrical Power DECT Power/LTE WLAN Phone Connecting to Electrical Power Info 5.2 Power SIM-Card Connecting to the power supply 1. Pick up the power supply unit included in the FRITZ!Box package. Use only this power supply unit for connecting to electrical power. 1. Connect the power supply unit to the socket on the FRITZ!Box labeled “Power”. 2. Plug the other end into an AC power outlet. The “Power/LTE” LED begins flashing after a few seconds.
Connecting the Computer to the FRITZ!Box 6 Connecting the Computer to the FRITZ!Box You can connect a computer with the FRITZ!Box either using a network cable or wirelessly over WLAN. A computer can be connected with the FRITZ!Box using only one of these methods. It is not possible to connect using the network cable and WLAN. 6.1 Connecting Computers to the LAN Port WLAN WLAN LAN LAN DECT DECT Connecting a computer to the FRITZ!Box using a network cable 1.
Connecting Computers to the LAN Port 4. Connect the other end of the network cable to one of the sockets on the FRITZ!Box labeled “LAN”. Now the FRITZ!Box and the computer are connected to each other. Connecting a Network Hub or Switch You can also connect a network hub or switch to the LAN port on the FRITZ!Box. WLAN LAN LAN LAN DECT Connecting the FRITZ!Box to a network hub 1. Set aside the network cable from the FRITZ!Box package. 2.
Connecting Computers Wirelessly over WLAN 6.2 Connecting Computers Wirelessly over WLAN Using WLAN radio technology you can connect multiple computers with the FRITZ!Box wirelessly. Please note the following before establishing a wireless connection between the computer and the FRITZ!Box: • WLAN device A computer to be connected to the FRITZ!Box via WLAN must be equipped with a WLAN device for it to support WLAN.
Connecting Computers Wirelessly over WLAN WLAN WLAN LAN LAN DECT DECT 2. When the “WLAN” LED flashes, start WPS on the WLAN device. You have two minutes for this task. How to start WPS depends on the WLAN device. Either press a button on the WLAN device, or start WPS in the control software of the WLAN device. The connection between the FRITZ!Box and the computer is established automatically. The computer is now connected with the FRITZ!Box.
Connecting Computers Wirelessly over WLAN 5. Select the setting “PIN method (WPS-PIN), the FRITZ!Box specifies the PIN”. 6. The PIN will be displayed. Enter this PIN in the control software of the WLAN device. 7. Click “Start WPS”. The “WLAN” LED on the FRITZ!Box flashes slowly, indicating that the WPS procedure has begun. Now a secure WLAN connection is being established between the FRITZ!Box and the WLAN device. The WLAN Device Specifies the PIN 1. Open the FRITZ!Box user interface. 2.
Connecting Computers Wirelessly over WLAN Transferring the WLAN Security Settings Manually The WLAN security settings for WLAN devices can also be transferred manually. Manual transfer is unavoidable if a WLAN device does not support any methods for transferring the security settings automatically. For manual transfer the WLAN security settings have to be entered in the WLAN software.
Connecting Computers Wirelessly over WLAN 3. SSID (Name of the WLAN radio network) FRITZ!Box 6810 LTE Encryption method WPA2 (AES-CCMP) Encryption WPA2-PSK (AES) WLAN key The key is printed on the sticker attached to the bottom of the housing. Network mode Infrastructure Confirm your entries using the relevant button in the user interface (for instance, “OK” or “Connect”. Now your WLAN device and the FRITZ!Box are connected with each other wirelessly.
Connecting Computers Wirelessly over WLAN The WLAN connection between your WLAN device and the FRITZ!Box will be established. We strongly recommend using a WLAN device that supports WPA or WPA2 (for instance, a FRITZ!WLAN USB Stick from AVM). WEP is out of date and data encrypted with WEP can be deciphered within minutes.
The FRITZ!Box User Interface 7 The FRITZ!Box User Interface The FRITZ!Box has a user interface you can open in a web browser on your computer. In the user interface you can set up the FRITZ!Box, enable or disable functions and receive information on the FRITZ!Box and on your connections. 7.1 Opening the User Interface The FRITZ!Box user interface can be opened on every computer connected with the FRITZ!Box. 1. Start a web browser on your computer. 2. Enter fritz.
Overview: Everything at a Glance 7.2 Overview: Everything at a Glance All important information about the FRITZ!Box is displayed directly on the “Overview” page of the FRITZ!Box user interface. By clicking the linked entries or “more...” you can jump from this page to the corresponding menus and configure settings there.
Standard View and Advanced View The middle area of the window presents information about connections, ports and configured convenience functions like MyFRITZ!, call diversion, guest access, remote maintenance, port forwarding and push service. In the lower area of the window, the information is rounded out by the last telephone calls conducted, the list of connected devices like computers or telephones, and the telephone book entries edited last. 7.
Protecting the User Interface with a Password 7.4 Protecting the User Interface with a Password You can protect the user interface of the FRITZ!Box with a password. The password will be requested every time the user interface is opened. This protects the settings of your FRITZ!Box from unauthorized access. For reasons of security, we recommend setting up and using password protection for the user interface.
Saving the FRITZ!Box Settings 3. After restarting, reconfigure the FRITZ!Box over the user interface or load your saved settings to the FRITZ!Box (see page 29). This concludes the reset of the FRITZ!Box. Logging Off the User Interface When password protection is enabled, you can log off the user interface at any time. To do so, click the menu in the upper area of the “Overview” page and select “Log off”.
Saving the FRITZ!Box Settings To load your saved settings to another FRITZ!Box of the same model, or to apply the settings of another FRITZ!Box model to your FRITZ!Box, the backup file must always be passwordprotected. Instructions for saving, restoring and applying FRITZ!Box settings are presented in the user interface’s Online Help.
Configuring an Internet Connection Into the LTE Network 8 Configuring an Internet Connection Into the LTE Network The Internet connection for the mobile communications network has to be set up once in the FRITZ!Box, then it is always available. Along with the SIM card, you received a PIN (Personal Identification Number) and a corresponding PUK (Personal Unlock Key) from your mobile communications network provider. Keep both numbers handy.
Connecting Telephones and Other Terminal Devices 9 Connecting Telephones and Other Terminal Devices This chapter describes how to connect telephones, fax machines, answering machines and telephone systems (PBXs) to the FRITZ!Box. 9.1 Registering FRITZ!Fon and Other Cordless (DECT) Telephones Up to six cordless telephones can be registered on the FRITZ!Box. The cordless telephones must support the DECT standard.
Registering Smartphones with FRITZ!App Fon 4. If you are asked for the PIN of the DECT base station, enter the DECT pin of the FRITZ!Box. Upon delivery the PIN of the FRITZ!Box is “0000”. If you changed the PIN and forgot it, you can enter a new DECT PIN in “DECT / Base Station” menu of the FRITZ!Box user interface (see page 25). The cordless telephone is connected with the FRITZ!Box. 9.
Connecting an IP Telephone You can assign telephone numbers to this telephone to determine which telephone numbers are used to make calls with your smartphone from home. See the section Configuring Connected Telephones and Terminal Devices on page 37 for instructions. 9.3 Connecting an IP Telephone Connect an IP telephone by plugging it into a network port on the FRITZ!Box or wirelessly via WLAN.
Connecting an IP Telephone Connecting an IP Telephone with the FRITZ!Box over WLAN IP telephones that support WLAN can be connected wirelessly to the FRITZ!Box via WLAN. Info Phone WLAN DECT WLAN Power/LTE Connecting an IP telephone with the FRITZ!Box over WLAN 1. Use your IP telephone to search for WLAN devices at your location. 2. Select your FRITZ!Box 6810 LTE from the list of WLAN devices found. 3. Enter the WLAN key of the FRITZ!Box.
Setting Up the FRITZ!Box for Telephone Calls 10 Setting Up the FRITZ!Box for Telephone Calls This chapter describes how to set up your FRITZ!Box for making telephone calls. 10.1 Entering Telephone Numbers in the FRITZ!Box Enter your Internet telephone numbers in the FRITZ!Box. Entering Internet Telephone Numbers Your Internet telephone numbers must always be entered in the FRITZ!Box.
Configuring Connected Telephones and Terminal Devices You receive all account information (user name, password) from your Internet telephony provider. Editing or Deleting Telephone Numbers All telephone numbers you entered in the FRITZ!Box are listed under “Telephony / Own Telephone Numbers” in the user interface. You can edit and delete telephone numbers here. 10.
Making Telephone Calls Editing or Deleting Telephones and Terminal Devices All telephones and other terminal devices you set up in the FRITZ!Box are listed under “Telephony / Telephony Devices” in the user interface. Here you can edit the settings of terminal devices and delete terminal devices. 10.3 Making Telephone Calls Once you have set up your telephones, you can make outgoing telephone calls to the public network and accept incoming calls.
Firmware Update: Updating the FRITZ!OS 11 Firmware Update: Updating the FRITZ!OS AVM provides free updates of the firmware for your FRITZ!Box. The firmware—called FRITZ!OS—is the software stored in the FRITZ!Box that controls all of the FRITZ!Box functions. FRITZ!OS updates contain further developments of existing FRITZ!Box functions and often also introduce new functions for your FRITZ!Box. A FRITZ!OS update is necessary if you would like to take advantage of further developments and new functions. 11.
Automatic Search for Updates and Updating FRITZ!OS 11.2 Automatic Search for Updates and Updating FRITZ!OS With the AVM service “Search for updates automatically” you will always be informed about the latest FRITZ!OS updates for your FRITZ!Box. When a new firmware for your FRITZ!Box is found on the AVM website, you will be notified on the “Overview” page. New updates are not installed automatically. Updating FRITZ!OS 1. Open the “Overview” page.
Automatic Search for Updates and Updating FRITZ!OS 3. Scroll down to the end of this page and click on the “AVM Services” link. The “AVM Services” page is opened. 4. Disable the setting “FRITZ!Box searches for updates periodically” and save your setting with “Apply”. The AVM service “Search for updates automatically” is now disabled.
MyFRITZ!: Global Access to the FRITZ!Box 12 MyFRITZ!: Global Access to the FRITZ!Box MyFRITZ! is an web service by AVM with which you can access your FRITZ!Box from anywhere in the world over the Internet. • FRITZ!NAS: When you use MyFRITZ!, FRITZ!NAS is available everywhere. You can access photographs, music and documents located on the storage media connected to the FRITZ!Box.
MyFRITZ!: Global Access to the FRITZ!Box • Enter the following user data: – For the MyFRITZ! account, enter your e-mail address and assign a MyFRITZ password. – For access to the FRITZ!Box over the Internet, enter a FRITZ!Box Internet password. This password is requested by the FRITZ!Box whenever you want to access the FRITZ!Box via MyFRITZ!. • You receive an e-mail from MyFRITZ! containing a registration link. If possible, open the e-mail on the computer on which you began to set up the account.
MyFRITZ!: Global Access to the FRITZ!Box MyFRITZ! in the Home Network You can also use MyFRITZ! in the FRITZ!Box home network. 1. Enter “myfritz.box” in the address field of your browser. 2. Enter the Internet password for your FRITZ!Box. You will be directed to the MyFRITZ! page of your FRITZ!Box. In this case you do not have to log in to MyFRITZ!. Multiple FRITZ!Boxes You can register multiple FRITZ!Boxes at one MyFRITZ! account.
FRITZ!Box as an Internet Router 13 FRITZ!Box as an Internet Router The FRITZ!Box connects computers in your home network with the Internet. This chapter explains the possibilities offered by using the FRITZ!Box as an Internet router and how to take advantage of them. 13.1 Child Protection: Restricting Internet Access The child protection feature allows you to define access rules to the Internet for individual computers or Windows users.
Port Forwarding: Making Computers Accessible from the Internet Setting Up Child Protection in the FRITZ!Box 13.2 1. Open the FRITZ!Box user interface (see page 25). 2. Select the “Internet / Filters” menu. 3. Set up child protection. See the Online Help available in the FRITZ!Box user interface for more information. Port Forwarding: Making Computers Accessible from the Internet With default settings in the FRITZ!Box, programs on your computer and LAN cannot be accessed from the Internet.
Port Forwarding: Making Computers Accessible from the Internet TCP IPv4: UDP Within IPv4 networks you can open the FRITZ!Box firewall for the protocols TCP and UDP when entering the port range. One port can be opened for exactly one computer. IPv6: Within IPv6 networks you can open the FRITZ!Box firewall for the protocols TCP and UDP when entering the port range. One port can be opened for each computer in the network.
Dynamic DNS: Name Instead of IP Address Determining the IPv4 Address for Accessing the FRITZ!Box If you have enabled ports for forwarding in the FRITZ!Box, other Internet users can access your computers at the IP address assigned to your FRITZ!Box by the Internet service provider. This is a public IPv4 address. Here is how to determine the public IPv4 address of the FRITZ!Box: 1. Open any Internet page in order to establish an Internet connection. 2.
Remote Access over HTTPS Every time the IP address changes, the FRITZ!Box transmits the new IP address to the dynamic DNS provider in the form of an update request. Then the domain name is assigned to the current IP address by the dynamic DNS provider. Setting Up Dynamic DNS in the FRITZ!Box 13.4 1. Open the FRITZ!Box user interface (see page 25). 2. Enable the advanced view. 3. Select the “Internet / Permit Access” menu. 4. Select the “Dynamic DNS” page and set up dynamic DNS.
Prioritization: Right of Way for Internet Access 13.5 Prioritization: Right of Way for Internet Access Prioritization is a function you can use to specify that network applications and network devices be treated with higher or lower priority when they access the Internet connection. For example, you may wish to ensure that applications like Internet telephony, IPTV and video on demand are always treated with higher priority than other applications.
Prioritization: Right of Way for Internet Access Prioritized Applications This category is suitable for applications that require a fast reaction time (for example, company access, terminal applications, games). • For network applications prioritized in this category, 90% of the FRITZ!Box’s upload bandwidth is available, as long as no application from the “real-time applications” category requires bandwidth.
VPN: Remote Access to the Home Network • Discard low-priority packets in order to ensure the transmission of higher-priority packets. This algorithm is used whenever more packets are supposed to be sent to the Internet than the upstream transmission rate of the Internet connection allows. • As long as no packets are being sent from higher-priority applications, the full transmission rate of the Internet connection is available for low-priority packets. Setting Up Prioritization in the FRITZ!Box 13.
VPN: Remote Access to the Home Network Setting Up VPN in the FRITZ!Box 1. Open the FRITZ!Box user interface. 2. Enable the advanced view. 3. Select the “Internet / Permit Access” menu. 4. Select the “VPN” page. See the Online Help of the FRITZ!Box to set up VPN. Supplementary Software for VPN All of the information required for a VPN is saved in a configuration file. The terminals involved in any VPN must receive this file. Individual computers that are networked over a VPN require a VPN client.
DNS Server: Freely Selectable 13.7 DNS Server: Freely Selectable DNS servers are preset in the FRITZ!Box for IPv4 and IPv6. These are the DNS servers assigned by the Internet provider. For both IPv4 and IPv6, the preset DNS server can be replaced by a free DNS server. Free DNS servers include, for instance, OpenDNS and Google DNS. Here is how to change the DNS server entry: 1. Open the FRITZ!Box user interface. 2. Enable the advanced view. 3.
DNSSEC: Security for DNS Queries The home user relies on the authenticity of the IP address returned by the DNS server. Authentic means that the response is the IP address of the desired web site, and not a faked IP address that leads to a fake web site. DNSSEC can ensure that the returned addresses are authentic. Support with the FRITZ!Box The FRITZ!Box supports DNSSEC queries over UDP. The FRITZ!Box has a DNS proxy. The computers in the home network use the FRITZ!Box as a DNS server.
FRITZ!Box as a WLAN Base Station 14 FRITZ!Box as a WLAN Base Station The FRITZ!Box is a WLAN base station for WLAN devices like notebooks, tablets or smartphones. The FRITZ!Box can establish WLAN connections compliant with the fast WLAN N standard. The FRITZ!Box is preconfigured with an encryption method from today’s safest method WPA2. This encryption method is supported by most of the latest WLAN devices.
Connecting WLAN Devices Securely with the FRITZ!Box Connecting WLAN Devices Automatically (WPS) WLAN devices that support the fast connection method WPS can be connected with the FRITZ!Box automatically. 1. Start the WPS function of your WLAN device. Consult the documentation of the WLAN device to find out how to start WPS. 2. Press the WLAN button on the FRITZ!Box until the “WLAN” LED begins flashing. You have two minutes for this task. 3.
Connecting WLAN Devices with the FRITZ!Box Guest Access 4. Enter the WLAN key of the FRITZ!Box. With this, the WLAN connection is established. Your WLAN device is integrated into your home network and can use the Internet connection of the FRITZ!Box. 14.2 Connecting WLAN Devices with the FRITZ!Box Guest Access With the FRITZ!Box you can provide your guests with an Internet connection of their own.
Switching the WLAN Radio Network On and Off by Schedule 14.3 Switching the WLAN Radio Network On and Off by Schedule You can switch the WLAN radio network of the FRITZ!Box automatically according to a schedule. This function is called “night service” and reduces the power consumption of the FRITZ!Box by completely turning off the WLAN module.
Enlarging the WLAN Radio Network 14.4 Enlarging the WLAN Radio Network The range of a WLAN radio network is not specified. It depends on • the WLAN devices you are using for your WLAN connections • • interference in the vicinity of your WLAN radio network • the number of WLAN devices in the vicinity of your FRITZ!Box that work in the same frequency range the structural conditions where you operate the WLAN radio network You can extend the range of your WLAN radio network with a WLAN repeater.
WLAN—Getting Technical The wireless LAN connection between your FRITZ!Box and a FRITZ!Box in WDS operation can be encrypted by WPA2. The wireless LAN connection between your FRITZ!Box and another wireless LAN router is only possible with less secure WEP encryption. 14.5 WLAN—Getting Technical A wireless LAN radio network is based on standards defined by the Institute of Electrical and Electronic Engineers (IEEE).
WLAN—Getting Technical IEEE 802.11b With a maximum throughput rate of 11 Mbit/s, this is the oldest WLAN standard. Older WLAN devices of the first generation can communicate with the FRITZ!Box using 802.11b. However, if the WLAN device supports newer standards such as 802.11g, the latest standard should be used. IEEE 802.11g This is currently the most common WLAN standard. It communicates with a maximum of 54 Mbit/s gross in the 2.
WLAN—Getting Technical Make a note of which standards the WLAN devices in your network are compatible with and then adjust the FRITZ!Box settings according to the following information: • Your radio network integrates only WLAN devices that are compatible with one or both of the following standards: 802.11n 802.11g Set the following mode in the FRITZ!Box: Mode: 802.11n+g The 2.4-GHz frequency band will be used.
WLAN—Getting Technical The Standard for Security IEEE 802.11i The WPA2 security mechanism is defined in the IEEE 802.11i standard. WPA2 is an extension of the familiar security mechanism WPA (Wi-Fi Protected Access). The main feature of the extension of WPA to WPA2 is the AESCCMP encryption process. Mechanism Encryption WPA TKIP (Temporary Key Integrity Protocol) WPA2 TKIP AES-CCMP based on the extremely secure AES (Advanced Encryption Standard) procedure.
WLAN—Getting Technical In the 2.4-GHz frequency range the European regulation authorities have designated 13 channels for WLAN. A channel can have a bandwidth of 20 MHz (throughput of up to 130 Mbit/s) or 40 MHz (throughput of up to 300 Mbit/s). Channels located directly next to each other in the 2.4-GHz band may overlap and result in mutual interference. For instance, if several WLANs are operated close to each other in the 2.
WLAN—Getting Technical Channel Frequency (GHz) Channel Frequency (GHz) 5 2.432 12 2.467 6 2.437 13 2.472 7 2.
FRITZ!Box as a Telephone System 15 FRITZ!Box as a Telephone System The FRITZ!Box is a telephone system (or PBX: Private Branch Exchange) for Internet telephony. This chapter describes convenience functions for the telephone system that can be configured in the FRITZ!Box user interface, for instance telephone books, answering machines and call diversion.
The FRITZ!Box Call List 6. Click the “OK” button. The new telephone book is saved in the FRITZ!Box. Selecting a Telephone Book for FRITZ!Fon 1. Open the FRITZ!Box user interface (see page 25). 2. Select “DECT”. 3. Choose a FRITZ!Fon and click the “Edit” button. 4. Select a telephone book from the drop-down list. 5. Click the “OK” button. The telephone book is now available on the FRITZ!Fon. 15.
Setting Up FRITZ!Box Fax Reception 15.3 Setting Up FRITZ!Box Fax Reception With the FRITZ!Box you can receive faxes without having to connect a fax machine. The fax machine automatically forwards faxes received to one or multiple e-mail addresses, which you can define in the FRITZ!Box. 1. Open the FRITZ!Box user interface (see page 25). 2. Select the “Telephony / Telephony Devices” menu. 3. Click “Configure New Device”. 4. Select the “Fax function” option and confirm by clicking “Next”. 5.
Setting Up Call Diversion 15.4 Setting Up Call Diversion You can configure multiple call diversion modes with different settings in the FRITZ!Box. Call diversion can either divert all incoming calls or only certain calls. You can divert the calls to an external telephone number, to a certain telephone, or to an answering machine. Examples for Call Diversion Settings • All incoming calls will be diverted to another telephone line.
Saving Costs with Dialing Rules 15.5 Saving Costs with Dialing Rules A dialing rule defines which telephone number the FRITZ!Box uses for outgoing calls in a certain number range (for instance, mobile telephone numbers, international telephone numbers). If you have multiple telephone numbers, you can use dialing rules to have each outgoing call automatically placed using the most economical telephone rate. Setting Up New Dialing Rules in FRITZ!Box 1. Open the FRITZ!Box user interface (see page 25). 2.
Setting Up Do Not Disturb • Block telephone numbers for incoming calls: If a number has been blocked for incoming calls, the FRITZ!Box will no longer accept any calls from this telephone number. However, the FRITZ!Box can only recognize a blocked telephone number if the caller allows transmission of her or his telephone number. You can also block all anonymous incoming calls, for which the caller has suppressed transmission of the telephone number. Setting Up a New Call Block 1.
Setting Up the Alarm Turning Do Not Disturb On/Off 1. Open the FRITZ!Box user interface (see page 25). 2. Select the “System / Night Service / Do Not Disturb” menu. 3. Enable the “Do Not Disturb enabled” option and define the time period during which the telephones should not be able to ring every day. 4. Save your settings by clicking “Apply”. Do not disturb is now enabled. To have the telephones ring again, disable the “Do Not Disturb enabled” option and then click “Apply”.
Enabling the Baby Monitor 15.9 Enabling the Baby Monitor When the baby monitor is enabled for a telephone, the telephone automatically calls a previously specified telephone number whenever the volume in the room reaches a defined level. If the telephone is in the same room as your child, you can use this function to monitor its sleep. Enabling Baby Monitor N Pick up the handset or activate the speaker phone function of your telephone. We recommend using a device with a speaker phone function.
Making Telephone Calls with Convenience Functions 15.10 Making Telephone Calls with Convenience Functions This chapter describes convenience functions you can use when placing and making telephone calls, for instance internal calling, forwarding calls, alternating between calls and three-party conferences. Making Internal Calls All calls conducted between telephones connected to the FRITZ!Box are internal telephone calls. Internal calls are free of charge. Dialing Internal Calls N Pick up the handset.
Making Telephone Calls with Convenience Functions Transferring: Forwarding Calls Internally You can transfer a call to another telephone connected with the FRITZ!Box. Transferring Calls Call 1 You are talking to caller 1. P R Press the Hold button. Caller 1 is now on hold. ss Call caller 2: Select ss and the internal telephone number of a telephone.
Making Telephone Calls with Convenience Functions Three-party Conference Call A three-party conference call can involve one other internal participant and one external participant, or two external participants. Conducting a Three-party Conference Call N Pick up the handset. M Establish the call with party 1: Dial ss and an internal telephone number (see page 75) or dial an external telephone number. Talk. R Press the Hold button. Call 1 is on hold. M Call party 2.
Making Telephone Calls with Convenience Functions Accepting or Rejecting Waiting Calls on an Analog Extension of the FRITZ!Box When the “call waiting” function is switched on, you hear a signal whenever you receive an external call during an active telephone conversation. You can then accept the call within 30 seconds. If you do not accept the call, it will be rejected. You can enable and disable the “call waiting” function in the FRITZ!Box user interface in the menu “Telephony / Telephony Devices”.
Making Telephone Calls with Convenience Functions Alternating Between Calls Call 1 You are talking with party 1. P R Press the Hold (“R”) button. M Call party 2. • Dial an external telephone number, • or dial ss and an internal telephone number. Internal telephone numbers: Cordless DECT telephones: 610 – 615 IP telephones: 620 – 629 Call 2 P When party 2 picks up the receiver the call has been established. The connection with party 1 is on hold.
Making Telephone Calls with Convenience Functions Consultation / Hold You can put a telephone call on hold in order to consult with another party. You call the second party. The party to the other call does not hear the consultation; after you are finished you can resume the call that was on hold. Consultation / Hold Call 1 You are talking to caller 1. P R Press the Hold button. Call 1 is on hold. Party 1 can no longer hear you.
Making Telephone Calls with Convenience Functions Using Keypad Shortcuts With keypad sequences you can control the services and features for your Internet telephone numbers. For information about which keypad sequences you can use, contact your carrier. Entering Keypad Sequences on an Extension with Automatic Outside Dialing N Pick up the handset. sr Dial the sequence shown at left. stands for a keyboard sequence.
FRITZ!Box as a DECT Base Station 16 FRITZ!Box as a DECT Base Station A DECT base station is integrated in your FRITZ!Box, on which you can register and configure a total of up to six cordless telephones. This chapter describes various functions of the DECT base station. 16.1 Paging Cordless Telephones If you have misplaced a cordless telephone, you can find it by using a paging call: 16.2 1. Briefly press the “DECT” button of the FRITZ!Box.
Enabling DECT Eco 16.3 Enabling DECT Eco The DECT Eco function allows the FRITZ!Box to switch off the DECT network whenever all of the cordless telephones registered are on stand-by. The connection between the FRITZ!Box and the cordless telephones remains active. You can place and accept calls at any time. Prerequisite for Using DECT Eco DECT Eco can be used only if all of the cordless telephones registered on the FRITZ!Box support DECT Eco.
The FRITZ!Box Home Network 17 The FRITZ!Box Home Network The FRITZ!Box connects your network devices in what we call a FRITZ!Box home network. In the home network the FRITZ!Box allows all connected users shared use of a printer, for instance. Network Devices • Network devices include, for instance, computers, game consoles and smartphones that are connected with the FRITZ!Box via a network cable connection or via WLAN. • All network devices can access each other’s folders released for sharing.
Network Devices in the FRITZ!Box Home Network 18 Network Devices in the FRITZ!Box Home Network All network devices connected with the FRITZ!Box comprise a network. Network devices include, for instance, computers, game consoles and smartphones. The devices can be connected with the FRITZ!Box by cable or wirelessly. This chapter describes the network settings in the FRITZ!Box and how you can change them.
Network Settings in the FRITZ!Box For each user and each network device, you find an entry in the network overview. The columns have the following meanings: Icon A green LED before the device name indicates that a device is actively connected with the FRITZ!Box, but not using the Internet connection at this time. A green-blue globe indicates that the device is currently using the Internet connection. Name This column displays the name under which the user or the network device is known to the FRITZ!Box.
Network Settings in the FRITZ!Box Always Assigning the Same IP Address The editing mode for network devices includes the setting “Always assign this network device the same IP address”. When this setting is enabled for a network device, the DHCP server of the FRITZ!Box will always assign the same IP address to this device each time the connection is established. Starting the Computer—Wake on LAN The Wake on LAN function of computers can be enabled in the editing mode for network devices.
Network Settings in the FRITZ!Box IPv4 Settings in the FRITZ!Box The IPv4 settings of the FRITZ!Box are preset upon delivery with the following values: Factory Settings IPv4 address 2.168.178.1 Subnet mask 255.255.255.0 DHCP server enabled The IP address and the corresponding subnet mask yield the following values: Network address of the subnet 192.168.178.0 Entire IPv4 address range for the com- 192.168.178.2 puters 192.168.178.
Network Settings in the FRITZ!Box • Fixed IPv4 addresses are registered in the network settings of the computer, and you do not want to or are not permitted to change these addresses. • You want to connect the FRITZ!Box to the local IPv4 network in order to make the FRITZ!Box features available to all of the computers in the IPv4 network. Reserved IP Addresses The entire IP network 192.168.180.0 in the FRITZ!Box is reserved for internal purposes.
Network Settings in the FRITZ!Box Fixed IPv4 Addresses When the DHCP Server Is Enabled If you would like to configure fixed IPv4 addresses on individual computers connected with the FRITZ!Box despite the enabled DHCP server, please note the following: • The IPv4 addresses must be from the IPv4 network of the FRITZ!Box. • The IPv4 addresses may not come from the address range of the DHCP server. • Each IPv4 address can be assigned only once. Disabling the DHCP Server You can disable the DHCP server.
Network Settings in the FRITZ!Box Changing Network Settings 1. Enable the advanced view in the user interface. 2. Select the “Home Network / Network” menu. 3. Select the “Network Settings” page. 4. Click the “IPv4 Addresses” or “IPv6 Addresses” button, depending on the address range you would like to change.
Network Settings in the FRITZ!Box Unique Local Adresses The communication within the local network takes place via the Unique Local Addresses (ULA). If no IPv6 Internet connection is established, the network devices do not have a ULA and communication between them is restricted. For this case you can set the FRITZ!Box such that the network devices receive the ULA from the FRITZ!Box. DHCPv6 Servers in the Home Network The FRITZ!Box is equipped with its own DHCPv6 server.
Obtaining an IP Address Automatically 18.2 Obtaining an IP Address Automatically The FRITZ!Box has its own DHCP server, which assigns IP addresses to the connected computers. The connected computers must be configured such that they can receive their IP addresses automatically. The steps for checking and adjusting this option differ among the operating systems. See the relevant section for your operating system. If FRITZ!Box is operated in a network, no other DHCP server may be activated in this network.
Obtaining an IP Address Automatically 5. On the “General” tab, enable the options “Obtain an IP address automatically” and “Obtain DNS server address automatically”. 6. Click “OK” to save the settings. The computer now receives an IP address from the FRITZ!Box. Obtaining an IP Address Automatically in Mac OS X 1. Select the “System Preferences...” in the Apple menu. 2. In the “System Preferences” window, click the “Network” icon. 3.
Obtaining an IP Address Automatically Obtaining an IP Address Automatically in Linux For comprehensive information and tips on the topic of network settings in Linux, see, for example: tldp.org/HOWTO/NET3-4-HOWTO-5.
Help in Case of Errors 19 Help in Case of Errors This chapter provides assistance if you are not able to open the user interface of your FRITZ!Box or are having problems with the WLAN connection. For more comprehensive help, see the AVM knowledge database in the Internet, which can be accessed at the following address: service.avm.de/support/en/skb 19.1 The User Interface Does Not Open If an error message is returned when you open the FRITZ!Box user interface, this can have various causes.
The User Interface Does Not Open Checking the Cable Connections The FRITZ!Box user interface is not displayed in your web browser. Cause The cable connections are not secure. Help Make sure that all cables are plugged in securely. Checking the Name Resolution The user interface of the FRITZ!Box cannot be opened by entering fritz.box. Cause The name resolution of the FRITZ!Box does not work. Help 1. In the web browser, enter the following IP address in place of fritz.box: 192.168.178.1 2.
The User Interface Does Not Open Disabling Dial-up Connections The user interface is not opened; a window for a dial-up connection appears instead. Cause The browser must use the network connection between the computer and FRITZ!Box when the user interface is opened. For this the automatic establishment of a Dial-Up Networking connection must be disabled. Help You can disable the automatic attempt to establish a Dial-up Networking connection.
The User Interface Does Not Open Checking the Proxy Settings The user interface does not appear in the window of your web browser. Cause The proxy settings of the web browser prevent the user interface from being opened. Help Enter the DNS name and the IP address of the FRITZ!Box as an exception in the proxy settings of the web browser, as described here for the example of the Internet Explorer 8. 1. Select the “Connections” settings page under “Tools / Internet Options”. 2.
Cannot Establish a WLAN Connection Opening the User Interface Using the Fixed IP Address The FRITZ!Box has a fixed IP address that cannot be changed. The FRITZ!Box always can be reached at this IP address. Fixed IP address 169.254.1.1 Proceed as follows to open the FRITZ!Box user interface using this IP address: 1. Connect a computer to the FRITZ!Box with a network cable (see page 17). 2. Make sure that the computer obtains its IP address automatically (see page 93. 3.
Cannot Establish a WLAN Connection Enabling WLAN The WLAN device cannot find the radio network of the FRITZ!Box. Cause WLAN is switched off in the FRITZ!Box. The “WLAN” LED on the FRITZ!Box is off. Help Press the “WLAN” button on the FRITZ!Box. The “WLAN” LED begins flashing. As soon as the “WLAN” LED stops flashing and stays lit, the WLAN function of the FRITZ!Box is enabled. Announcing the Name of the Radio Network The WLAN device cannot find the wireless network of the FRITZ!Box.
Cannot Establish a WLAN Connection Checking the Security Settings for WLAN Make sure that the WLAN security settings of the FRITZ!Box agree with the security settings of the WLAN adapter. The WLAN security settings of the FRITZ!Box are found in the user interface: 1. Connect a computer to the FRITZ!Box with a network cable (see page 17). 2. Open the FRITZ!Box user interface (see page 25). 3. Select “WLAN / Security”. 4. Click the “Apply” button. A window is displayed with the WLAN security settings.
Cannot Establish a WLAN Connection Installing the Current Service Pack for Windows XP The WLAN connection to the FRITZ!Box cannot be established using the Microsoft WLAN Service (WZC: Windows Zero Configuration) in Windows XP with Service Pack 2. Cause The required Microsoft patch for WPA2 (IEEE 802.11i) may not be not installed. Help Install Service Pack 3 (SP3) for Windows XP, available as a free download from Microsoft.
Configuring FRITZ!Box on the Telephone 20 Configuring FRITZ!Box on the Telephone Various functions can be enabled and disabled using a telephone connected to the FRITZ!Box. You can also restore the factory settings of the FRITZ!Box using a telephone. Only tone-dialing (dual-tone multifrequency: DTMF) telephones can be used for configuration. 20.
Switching the Alarm On and Off 20.3 Switching the Alarm On and Off You can use the telephones connected to the FRITZ!Box as alarms. The alarm can be set individually and enabled or disabled at any time. Configuring the Alarm for a Telephone N Pick up the handset. r881s
Setting Up Call Diversion 20.4 Setting Up Call Diversion With call diversion you can divert incoming calls. The calls are diverted to an external telephone line or to a certain telephone connected with your FRITZ!Box. If your telephony provider supports direct diversion of incoming calls, calls will be diverted by your provider. Otherwise the FRITZ!Box establishes a second connection to divert the call. In either case, call diversion to an external line will be charged at your contracted telephone rates.
Setting Up Call Diversion Disabling Call Diversion for All Incoming Calls N Pick up the handset. Enter one of the following three keypad sequences: s21ssr Disables immediate call diversion. s61ssr Disables delayed call diversion. s67ssr Disables call diversion on busy. Q Wait for the second-long positive acknowledgement tone. O Hang up the handset.
Setting Up Call Diversion Disabling Call Diversion for the Outgoing Telephone Number N Pick up the handset. Enter one of the following three keypad sequences: s21sr Disables immediate call diversion. s61sr Disables delayed call diversion. s67sr Disables call diversion on busy. Q Wait for the second-long positive acknowledgement tone. O Hang up the handset.
Disabling Automatic Outside Dialing Disabling Call Diversion for a Certain Telephone Number N Pick up the handset. Enter one of the following three keypad sequences: 20.5 s21ssr Disables immediate call diversion. s61ssr Disables delayed call diversion. s67ssr Disables call diversion on busy. Q Wait for the second-long positive acknowledgement tone. O Hang up the handset.
Taking FRITZ!Box out of Operation 21 Taking FRITZ!Box out of Operation In this chapter you receive tips and recommendations for taking the FRITZ!Box out of operation. Please also follow our instructions for the correct disposal of waste equipment on page 130. 21.1 Removing the SIM Card If you want to end operation of the FRITZ!Box, remove the SIM card from the slot. 21.
Uninstalling Software 3. Click the “Load Factory Settings” button. The FRITZ!Box is reset to its factory settings. 21.3 Uninstalling Software Additional software for the FRITZ!Box is available on the web pages of AVM at avm.de/en/download. If you have installed supplementary programs on one or more computers, uninstall the software using the control panel of your Windows operating system. Uninstalling Software in Windows 7 1. Open “Start / Control Panel / Programs”. 2.
Technical Specifications 22 Technical Specifications Facts worth knowing: Here you will find comprehensive technical data on your FRITZ!Box 6810 LTE. 22.1 Ports and Interfaces • LTE modem compliant with 3GPP standard, release 8 LTE category 3 UE • LTE frequency bands – LTE band 20: 791 - 862 MHz (digital dividend) – LTE band 7: 2500 - 2690 MHz • • DECT base station • WLAN base station with support for wireless networks in the 2.
User Interface and Display 22.3 22.4 User Interface and Display • Configuration and status messages via a web browser on a connected computer • Five LEDs indicate the condition of the device Physical Specifications • • • Dimensions (W x D x H): ca.
Customer Service 23 Customer Service Be it product documentation, frequently asked questions, tips or support: this chapter presents information on all important service topics. 23.1 Documentation on the FRITZ!Box To take advantage of all commands and features of your FRITZ!Box, consult the following documentation: Help In the FRITZ!Box user interface you can open the comprehensive Online Help by clicking the “Help” icon and the “Help” buttons.
Feedback on FRITZ!Box AVM Knowledge Base We would like to make our products as easy to use as possible. If you still have problems, sometimes you need just a tip to resolve them. In our AVM knowledge base you find immediately help and answers to your questions in easy dialogs. In a guided navigation we provide for customized solutions. You find the AVM knowledge base on the AVM Internet pages in the “Service” area: service.avm.de/support/en/skb 23.
Support from the Support Team Evaluating the Voice Quality of Internet Calls In the “Advanced View” of the FRITZ!Box, the “Telephony / Own Telephone Numbers / Voice Transmission” page offers you the opportunity to evaluate the quality of a call conducted over the Internet. Your evaluation will help us continue to improve the quality of voice transmission in Internet calls made over the FRITZ!Box. The contents of the call and numbers participating will not be transmitted to AVM. 23.
Support from the Support Team Support by E-mail You can send us an English-language e-mail request at any time using the “Service” area of our web site. The “Service” area can be reached at: avm.de/en/service 1. Select the product group and your product for which you need support from the “Support” area. You will receive a selection of FAQs. 2. If you need more help, click the “Contact support” button to open the e-mail support form. 3.
Manufacturer’s Warranty 23.5 Manufacturer’s Warranty We offer a manufacturer’s warranty of 5 years on the hardware of this original product. The warranty period begins with the purchase date from the first end user. Compliance with the warranty period can be proven by submission of the original invoice or comparable documents. This warranty does not restrict your warranty rights based on the contract of sale or other statutory rights.
AVM Products for the FRITZ!Box 24 AVM Products for the FRITZ!Box Here we introduce additional devices by AVM that are designed to be used in combination with your FRITZ!Box 6810 LTE. FRITZ!Powerline 520E LAN Powerline Power outlet With FRITZ!Powerline 520E your electrical outlet is transformed into a secure network line. And the power outlet can still be used to plug in devices.
AVM Products for the FRITZ!Box FRITZ!Powerline 500E LAN Powerline With FRITZ!Powerline 500E your electrical outlet is transformed into a secure network line.
AVM Products for the FRITZ!Box FRITZ!WLAN USB Stick N Up to 300 Mbit/s Dual band WPA2 (802.11i) Stick & Surf FRITZ!WLAN USB Stick N connects your computer easily and safely with your FRITZ!Box WLAN and other compatible WLAN routers: • USB stick for WLAN N with up to 300 Mbit/s • WLAN support for either 2.4-GHz or 5-GHz connections (dual band) • Supports the conventional standards 802.11n/g/b/a • WPA2 encryption for maximum WLAN security (802.
AVM Products for the FRITZ!Box FRITZ!WLAN USB Stick Up to 150 Mbit/s WPA2 (802.11i) Stick & Surf FRITZ!WLAN USB Stick connects your computer easily and safely with any WLAN router: • USB stick for WLAN N with up to 150 Mbit/s • Supports the WLAN standards 802.11n/b/g • WLAN support for 2.4-GHz connections • WPA2 encryption for maximum WLAN security (802.
AVM Products for the FRITZ!Box FRITZ!WLAN Repeater 300E Up to 300 Mbit/s WPS Gigabit LAN With the FRITZ!WLAN Repeater 300E the range of the wireless network can be conveniently extended: • Compatible with all conventional WLAN routers (802.11n/g/b/a radio standards) • WLAN support for either 2.
AVM Products for the FRITZ!Box Up to 300 Mbit/s WPS With the FRITZ!WLAN Repeater 310 the range of the wireless network can be conveniently extended: • Compatible with all conventional WLAN routers (802.11n/g/b/a radio standards) • WLAN support for 2.4-GHz conections • Simple configuration at the click of a button, via WPS or using a Wizard • Small and very compact: designed for operation at any 230-V outlet For more information, see avm.de/en/Produkte/FRITZ_ WLAN/FRITZ_WLAN_Repeater_300E.
AVM Products for the FRITZ!Box FRITZ!WLAN Repeater N/G Up to 300 Mbit/s WPS Media function With the FRITZ!WLAN Repeater N/G the range of the wireless network can be extended quickly and easily: • Compatible with all conventional WLAN routers (802.11n/g/b/a radio standards) • WLAN support for either 2.
AVM Products for the FRITZ!Box FRITZ!Fon MT-F HD telephony Color display Web radio Reading e-mail FRITZ!Fon MT-F is a convenient cordless telephone (DECT) developed especially for the FRITZ!Box: • Supports HD telephony for natural sound, full duplex handsfree calls and open listening in HD quality • Voice transmission encrypted upon delivery for greater security • Intuitive menus on a large color display • Receive RSS feeds, web radio and podcasts, and read and answer e-mail • Battery talk time u
AVM Products for the FRITZ!Box FRITZ!Fon M2 HD telephony Web radio Reading e-mail FRITZ!Fon M2 is an ergonomically designed cordless telephone (DECT) developed especially for the FRITZ!Box: • Supports HD telephony for natural sound, full duplex handsfree calls and open listening in HD quality • Voice transmission encrypted upon delivery for greater security • Range up to 300 meters outdoors and up to 40 meters indoors • Receive RSS feeds, web radio and podcasts, and read and answer e-mail • Batte
Legal Notice Legal Notice This documentation and the software it describes are protected by copyright. AVM grants the nonexclusive right to use the software, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. AVM reserves all rights that are not expressly granted to the licensee.
Declaration of CE Conformity Declaration of CE Conformity The manufacturer AVM GmbH Alt-Moabit 95 10559 Berlin Germany herewith declares that the product FRITZ!Box 6810 LTE LTE WLAN router complies with the following directives: 1999/5/EC R&TTE Directive: Radio Equipment and Telecommunications Terminal Equipment 2009/125/EC EU directive: ecodesign requirements for energy-related products The following norms were consulted to assess conformity: - EN 60950-1:2006 /A1:2010 - EN 55024:2010 - EN 301 489-1 V
Disposal Information In accordance with European regulations, the FRITZ!Box 6810 LTE, as well as all devices and electronic components contained in the package, may not be disposed with household waste. Please bring FRITZ!Box 6810 LTE to a collection point in your local community for the disposal of electric and electronic appliances after use. Symbol for the separate collection of electric and electronic devices Note the symbol for the separate collection of electric and electronic devices.
Glossary Glossary 3GPP short for 3rd Generation Partnership Project 3GPP is an international project in which standardization bodies work together to standardize mobile communications. Participants in the project include the ETSI (European Telecommunications Standards Institute). bandwidth management Bandwidth management distributes the available bandwidth of an Internet connection among various Internet applications.
Glossary Each time the IP address changes, the current IP address is transmitted to a special DDNS server. Except for the few seconds between the cancellation of the old IP address and the notification of the new IP address, the computer can always be reached at the selected domain name.
Glossary DHCP server The DHCP server assigns each client an IP address that it has not yet been assigned at the present time. The DHCP server also informs the client of the IP addresses of the DNS server to be used and of the default gateway. In assigning the IP addresses the DHCP server selects from a prescribed range of IP addresses. DHCP is used in IPv4 networks (see glossary). DNS short for Domain Name System Domain Name Service takes care of determining the IP address for a given domain name.
Glossary dynamic IP address A dynamic IP address is an IP address valid only for the duration of one Internet or network session. Every computer participating in the Internet must have a uniquely assigned public IP address. Since only a limited number of such IP addresses is available, they must be used sparingly. That is why most of the Internet participants who dial in to the Internet receive a dynamic IP address.
Glossary Especially effective firewalls go even further, analyzing and evaluating the contents of the packets and filtering them according to prescribed rules. Such techniques may also include a Stateful Packet Inspection Firewall, for instance. firmware The firmware is the software of an electronic device, which is stored in the device and controls its functions. FTP short for File Transfer Protocol The File Transfer Protocol allows files to be exchanged between two computers in the Internet.
Glossary hub A hub is a device that is used to connect network devices to each other, for instance through an Ethernet. Network devices are connected to each other in a star network, with each network device connected to the hub. There are no direct connections between the network devices. A hub can either send or receive data. Received data are sent to all connected devices. All connected devices share the data throughput.
Glossary IPv6 short for Internet Protocol version 6 IPv6 is the successor protocol to IPv4. IPv6 addresses are 128 bits long. This means that IPv6 makes approximately 340 undecillion (~ 3.4 x 1036) IPv6 addresses available. Each private user can be allotted over 18 quintillion public IPv6 addresses from her or his Internet service provider. The dearth of addresses in IPv4 is only one of the reasons for introducing IPv6.
Glossary LTE short for Long Term Evolution LTE is a mobile network technology standard specified by the 3GPP Release 8. LTE provides for high throughput rates and is quite suitable for mobile Internet. NAT short for Network Address Translation NAT is a technique used within IPv4 networks. NAT is used in routers to replace the address information in data packets with new address information. A typical application for NAT is routers that connect local networks with the Internet.
Glossary port So that a single network connection on a computer can be used by multiple applications to exchange data with remote sites at the same time, a computer administers what are known as ports for the IP-based protocols TCP and UDP. Ports substantiate the point of access for the data packets delivered via the IP Internet protocol.
Glossary port used by the server service for access to incoming data packets and thus keep it open permanently. The private IP address of the given computer must be saved as the destination address for all of the packets arriving at the port. Typical server applications that require port forwarding are FTP and web servers.
Glossary subnetwork A local IP network can consist of one subnetwork or be divided into multiple subnetworks. The division into subnetworks is performed when the local IP network is configured. The subnetworks of a local IP network are also IP networks (see glossary). subnet mask The subnet mask indicates which part of an IP address (see glossary) is the network address and which the address of the computer. The network address defines what is called the subnet.
Glossary update A more recent version of software or firmware is called an update. Updates are often free of charge, resolve minor programming errors, and sometimes also offer new functions. uplink port The uplink port on a hub or switch is designed for connecting another hub or switch, or a router. In contrast to the uplink port, there is also a user port for connecting terminal devices. The send and receive directions are transposed on the uplink port.
Glossary UPnP AV short for Universal Plug and Play Audio/Video UPnP AV is a UPnP specification for the interaction between the media server, playback devices and devices controlling the streaming (transmitting a data stream) of audio, image and video data within networks. Media servers are devices that make audio, image and video data available upon request. Playback devices render the audio, image and video data (television, stereo system, streaming clients).
Glossary VoIP short for for Voice over IP, also known as Internet telephony Calls from the Internet are possible to and from the fixed-line network and mobile communications networks. Various Internet service providers and telephony carriers provide SIPfixed-line gateways for this purpose. The gateways are used to produce voice connections between the Internet and conventional telephone networks. In principle, VoIP calls can be made over any Internet connection.
Glossary their customers, either free or subject to a charge. Ultimately this has maneuvered WLAN into serious competition with mobile UMTS technology. The application possibilities for wireless network communication also overlap with Bluetooth technology. For mobile devices with limited energy capacity Bluetooth is the more useful solution, however, as Bluetooth uses considerably less power than wireless LAN.
Index A connecting computers . . . . . . . . . . . . . 17 connecting to electrical power. . . . . . . 16 connection LEDs . . . . . . . . . . . . . . . . . . . . . . . . 10 consultation function . . . . . . . . . . . . . . 80 copyright . . . . . . . . . . . . . . . . . . . . . . . 128 cordless telephone deregistering. . . . . . . . . . . . . . . . . . 82 paging . . . . . . . . . . . . . . . . . . . . . . . 82 registering. . . . . . . . . . . . . . . . . . . . 32 customer service. . . . . . . . . . . . . . .
F I factory settings DHCP server . . . . . . . . . . . . . . . . . . 89 IPv4 address . . . . . . . . . . . . . . . . . . 88 loading by telephone . . . . . . . . . . 104 loading with FRITZ!Box . . . . . . . . . 110 fax receiving . . . . . . . . . . . . . . . . . . . . . 69 sending to e-mail address . . . . . . . 69 fax machine connecting . . . . . . . . . . . . . . . . . . . 32 features . . . . . . . . . . . . . . . . . . . . . . . . . 75 feedback . . . . . . . . . . . . . . . . . . . . . . . 115 filter .
M R manufacturer’s warranty. . . . . . . . . . . 118 MyFRITZ! . . . . . . . . . . . . . . . . . . . . . . . . 42 recovery electrical equipment . . . . . . . . . . 130 electronic equipment . . . . . . . . . . 130 recycling . . . . . . . . . . . . . . . . . . . . . . . 130 registering FRITZ!Fon . . . . . . . . . . . . . . 32 registering handset. . . . . . . . . . . . . . . . 32 remote access . . . . . . . . . . . . . . . . . 49, 52 see VPN requirements for operation . . . . . . . . . 12 room monitoring . .
T V technical specifications . . . . . . . . . . . 112 telephone connecting . . . . . . . . . . . . . . . . . . . 32 telephone book for FRITZ!Fon . . . . . . . . . . . . . . . . . . 67 of the FRITZ!Box . . . . . . . . . . . . . . . 67 telephone number blocking . . . . . . . . . . . . . . . . . . . . . 71 telephone numbers. . . . . . . . . . . . . . . . 36 configuring . . . . . . . . . . . . . . . . . . . 36 Internet . . . . . . . . . . . . . . . . . . . . . . 36 telephone system . . . . . . . . . . . . .
FRITZ!Box 6810 LTE 150
