Operation Manual

Factory Settings
46 FRITZ!X USB – 6 Configuring FRITZ!X USB
z
Call waiting is disabled on all extensions.
z Reject calls when busy (Busy on Busy) is disabled for all
extensions.
z Call Diversion via the second B channel is disabled on
all extensions.
z Call forwarding is disabled for all MSNs.
z Suppression of the outgoing Caller ID is disabled on all
extensions.
z Incoming Caller ID display is activated on all
extensions.
z The Do Not Disturb function is enabled for all
extensions.
z The LCR function is disabled for all extensions.
z The Group Call function is disabled for all extensions.
z For terminal devices that support SMS, the acceptance
of SMS messages is activated for all extensions.
z Dialing restrictions are disabled on all extensions.
z Connected Line Identification Presentation (COLP) is
enabled for all extensions.
z The 16 kHz charge-unit pulse is disabled for all
extensions.
z The Quick-Dial memory of the PBX is empty.
F!XUSB-e.book Seite 46 Mittwoch, 8. November 2006 2:23 14