Operation Manual

Factory Settings
FRITZ!X USB – 6 Configuring FRITZ!X USB 45
Charges
FRITZ!X logs all charges incurred at the PBX and provides
statistical evaluations. This provides an overview of the
monthly charges incurred by the PBX. The charge statistics
can be displayed in tables and also as a graph. The charge
lists can also be exported to a file for further processing.
Telephony
This menu includes everything you need to call internal or
external parties from your computer. With these commands
you can maintain the Address Book and view the Event Log
and the Caller List. The Event Log records all events that take
place at the extensions. All incoming calls are registered in
the Caller List.
LCR
FRITZ!X provides an LCR (Least Cost Routing) feature. With
this function, the most economical provider for a connection
is selected automatically, depending on the number dialed
and the time of day. You can configure schedules to select
the best provider according to the area code dialed and time
of day the call is conducted.
Update
Use this menu to update the PBX software (firmware) to keep
your PBX up with the latest technology.
6.2 Factory Settings
Your FRITZ!X USB telecommunications system is ready for
operation with the factory settings.
The following settings are configured upon delivery:
z No Multiple Subscriber Numbers (MSNs) are assigned
to the individual extensions. All extensions ring for all
incoming calls.
z All extensions are set to automatic outside dialing. You
hear the external dial tone immediately when you pick
up the receiver.
F!XUSB-e.book Seite 45 Mittwoch, 8. November 2006 2:23 14