Operation Manual

Always Prepared With “Remote Wake Up”
FRITZ!X USB – 5 FRITZ!: Internet and ISDN Software 43
For more information on ACPI, see Windows Help on the
FRITZ!X USB CD in the SOFTWARE\INFO folder or the manuals
for your computer and motherboard.
Always Prepared With “Remote Wake Up”
Please note the following to keep FRITZ!X USB and FRITZ!
ready to receive at all times in standby operation.
z Deactivate the “Hibernation” option. The “Remote
Wake Up over ISDN” command is not available when
the system is hibernating.
z For an incoming call to “wake up” the computer from
standby, at least one ISDN application must indicate to
the CAPI driver that it is ready to receive. Make sure that
a suitable application is started.
The computer will be “woken up” when FRITZ!X USB receives
information about an incoming call during standby (hence
the name “Remote Wake Up”). The program checks the
service indicator and phone number of the incoming call; if a
suitable program is active, the call will be accepted.
Depending on the power options set, the computer may
return to standby after checking the call parameters.
F!XUSB-e.book Seite 43 Mittwoch, 8. November 2006 2:23 14