Operation Manual

Installing the Driver Software in Windows 98
FRITZ!X USB – 3 Software Installation 27
3. When the program asks where to search for the driver,
activate only the option “CD-ROM drive”.
Specifying the driver location in Windows 98
4. When the message “Windows has finished installing
the software selected that your new hardware device
requires.” appears, click “Finish”.
5. Choose your language and click “Continue”.
6. Next, the sign-on window of the installation program for
the FRITZ!X USB PBX appears automatically.
7. Specify the folder in which the driver software is to be
installed on your computer.
8. As a final step of the driver software installation, a
message box is displayed showing the configuration of
FRITZ!X USB.
Once the driver software installation has been completed, a
message reports that the FRITZ! communications software
can be installed. For more information, read “Installing the
Communications Software FRITZ!” on page 28.
F!XUSB-e.book Seite 27 Mittwoch, 8. November 2006 2:23 14