Operation Manual

Using Keypad Messages
58 FRITZ!X PC – 6 Operation
6.12 Using Keypad Messages
FRITZ!X PC allows you to use keypad sequences.
Your ISDN provider may allow you to access additional or fu-
ture ISDN features, which may not be directly supported by
your terminal equipment, by dialing Keypad Messages. Key-
pad Messages are sequences of keys to press on your tele-
phone. In order for the ISDN PBX to interpret these sequenc-
es correctly, it must support the “Keypad Messages” feature.
Ask your ISDN provider for the specific Keypad Messages to
access ISDN features.
To enter a Keypad Message on an extension with automatic
outside dialing:
To enter a Keypad Message on an extension without auto-
matic outside dialing:
6.13 Adjusting the Hold Button Function
Make sure the Hold button function is properly adjusted on
your analog terminal equipment. FRITZ!X PC supports a hook
flash interval of 80 ms (short hook flash) to 310 ms (long
hook flash).
See the operating instructions accompanying your terminal
equipment.
N
Pick up the handset.
sr Seq Dial the sequence shown at left, where “Seq”
stands for the Keypad Message supplied by your
ISDN provider.
N
Pick up the handset.
0sr Seq Dial the sequence shown at left, where “Seq”
stands for the Keypad Message supplied by your
ISDN provider.
F!xpc_e.book Seite 58 Dienstag, 16. Oktober 2001 6:07 18