Operation Manual

Alternating Between Calls
FRITZ!X PC – 6 Operation 53
6.5 Alternating Between Calls
Whenever you have one active connection and one caller on
hold, you can switch from one call to the other as often as
you want using the Hold button.
To alternate between two connections, proceed as follows:
The alternating connections can be ended in a number of
ways:
Call No. 1
P
You are talking on an active connection.
R
Press the Hold button. Call No. 1 is now on hold.
M
To begin a connection to Caller No. 2, dial the de-
sired number.
Call No. 2
P
When Caller No. 2 answers, you can talk.
R2
To switch from Call No. 2 to Call No. 1, dial the se-
quence shown at left.
Call No. 1
P
Call No. 1 is now active again and Call No. 2 is on
hold.
R2
To switch back from Call No. 2 to Call No. 1, dial
the same sequence once more. In this way you
can alternate between Calls No. 1 and 2.
O
The caller on hold hangs up. You can continue
talking on the active connection.
R1
You end the active connection by dialing the se-
quence shown at left. The call that was on hold is
now active again, and there is no call left on hold.
O
You can also return to the call on hold by hanging
up the handset: this ends the currently active
connection. In this case the phone rings as soon
as you have hung up. Pick up the handset again
to return to the last call that was on hold.
F!xpc_e.book Seite 53 Dienstag, 16. Oktober 2001 6:07 18