Operation Manual

Dialing External Calls
50 FRITZ!X PC – 6 Operation
Dialing External Calls with No Outgoing Caller ID (CLIR)
This function prevents your number from being displayed on
the telephone of the subscriber you call. Proceed as follows:
After the CLIR sequence you do not need to dial the outside
line prefix “0”, even if your extension is not set for automat-
ic outside dialing.
The CLIR sequence must be dialed before each call for which
your outgoing Caller ID is to be suppressed. To activate this
feature for all your calls, set the CLIR option for your exten-
sion in the configuration program FRITZ!X.
This feature must be enabled for you ISDN line by your ISDN
provider.
N
Pick up the handset.
s31r
Dial the sequence shown at left. Now you hear
the external dial tone.
M
Dial the number you want to call.
F!xpc_e.book Seite 50 Dienstag, 16. Oktober 2001 6:07 18