Operation Manual

Factory Settings
38 FRITZ!X PC – 5 FRITZ!X PC Configuration
7. Specify the outside dialing mode for each extension
8. Enable or disable group calls for each extension
9. Update the PBX firmware
5.2 Factory Settings
FRITZ!X PC is shipped with the following settings:
l No Multiple Subscriber Numbers are defined (MSNs) or
assigned to the extensions. All extensions ring for all in-
coming calls.
l All extensions are set for automatic outside dialing: the
outside line’s dial tone is heard when the handset is
picked up.
l Call Waiting is deactivated on all extensions: a second
incoming call is not signaled on an extension that al-
ready has an active connection.
l Call Forwarding is deactivated on all extensions.
l Call Diversion is deactivated for all MSNs.
l Suppression of the outgoing Caller ID is deactivated on
all extensions.
l Incoming Caller ID display is activated on all exten-
sions.
5.3 Configuring FRITZ!X PC
To adjust your FRITZ!XPC for your individual requirements,
set the necessary options in the FRITZ!X configuration pro-
gram, then transmit the settings to FRITZ!X PC.
Starting FRITZ!X
Start the configuration program from the Windows “Start”
menu by selecting “Start / Programs / AVM / FRITZ!X”.
F!xpc_e.book Seite 38 Dienstag, 16. Oktober 2001 6:07 18