Operation Manual

Removing Software Components
28 FRITZ!X PC – 3 Software Installation
3.7 Removing Software Components
The software components of FRITZ!X PC are identified in Win-
dows by these names:
l AVM FRITZ!
l AVM ISDN CAPI Port
l AVM ISDN-Controller FRITZ!X PC
l AVM FRITZ!X Configuration
Removing Software in Windows Me/98/95 or NT
To remove some or all of the FRITZ!X PC software compo-
nents, proceed as follows:
1. Open the Control Panel under “Settings” in the Start
menu and double-click the “Add/Remove Programs”
icon.
Those components of FRTIZ!X PC which have been cor-
rectly installed are found in the list of installed soft-
ware. Select the component you want to remove, then
click the “Add/Remove” button.
2. The “Uninstall” program starts. All of the files and sys-
tem settings for the selected software component are
removed from your computer.
3. Repeat this process if you want to remove another soft-
ware component of FRITZ!X PC. When you have fin-
ished, restart your computer.
Removing Software in Windows 2000
The procedure for removing software in Windows 2000 is not
the same for all software components.
F!xpc_e.book Seite 28 Dienstag, 16. Oktober 2001 6:07 18