Operation Manual

Installing Individual Software Components
26 FRITZ!X PC – 3 Software Installation
3.4 Installing Individual Software Components
Certain software components supplied with FRITZ!X PC may
already be installed on your computer, such as the FRITZ!
communication software for example. In this case you may
want to install only certain individual components from the
FRITZ!X PC CD. You can do so as follows:
l To install the FRITZ!X PC driver software, follow the in-
structions in the section “Beginning the Installation” on
page 20.
l To install the FRITZ! communications software, start the
program SETUP.EXE in the directory \SOFTWARE\FRITZ!
on the FRITZ!X PC CD.
l To install the AVM ISDN CAPI Port Driver, run the program
SETUP.EXE in the directory \SOFTWARE\CAPIPORT\CAPI-
PORT.<operating system> on the CD.
l To install the FRITZ!X configuration program, run the pro-
gram SETUP.EXE in the folder \SOFTWARE\CONFIG\
DISK1 .
3.5 Program Installation Folders
After the installation has been completed using the default
paths, the FRITZ!X PC software components for the operating
systems Windows Me, 98, 95 and NT 4.0 are found in the lo-
cations described below.
The driver software for the ISDN-Connector FRITZ!X PC is
loaded automatically when Windows is started. During the
driver software installation in the operating systems named
above, the program group “AVM” is created under “Pro-
grams” in the Start menu. This group contains four items:
l “AVM Internet Home Page” is a link to AVM’s web site
(requires a web browser and a connection to the Inter-
net).
l The FRITZ!X configuration program.
l “FRITZ!X PC Readme” contains the latest information
about the product.
F!xpc_e.book Seite 26 Dienstag, 16. Oktober 2001 6:07 18