Operation Manual

Beginning the Installation in Windows 2000
22 FRITZ!X PC – 3 Software Installation
3. In the Help page that appears, choose the operating
system in which the software is to be installed by click-
ing the corresponding button.
4. The welcome page for your operating system appears.
Click “Continue”.
5. Please read the installation instructions in the next
Help page, then click “Continue”. The Setup program
starts.
6. A message appears informing you that the Setup pro-
gram was unable to find the “digital signature” for
FRITZ!X PC. Click “Yes” to continue the installation.
7. A second message then informs you that no digital sig-
nature was found for the AVM NDIS WAN CAPI driver.
Click “Yes” once again to continue.
8. In the next dialog, select an available COM port for
FRITZ!X PC and click “Continue”.
9. When the driver software installation is complete, a
message box appears displaying the configuration of
FRITZ!X PC. Click “Exit” to close the driver software in-
stallation.
After driver software for FRITZ!X PC has been installed, the
Setup program for the FRITZ! communications software is
started. Please skip ahead to the section “Continuing the In-
stallation” on page 24.
F!xpc_e.book Seite 22 Dienstag, 16. Oktober 2001 6:07 18