Operation Manual

Connectors
12 FRITZ!X PC – 1 Introduction
1.5 Connectors
FRITZ!X PC uses the following connectors:
The ISDN cable supplied with FRITZ!X PC has an RJ45 plug at
each end. The power cord also has a RJ45 plug at one end.
Analog terminal devices are connected to FRITZ!X PC by
means of an RJ12 plug.
FRITZ!X PC is connected to your computer’s serial interface
by means of the cable with the nine-pin sub-D plug.
1.6 Cables
FRITZ!X PC is connected to the ISDN line using the ISDN ca-
ble, which has an RJ45 plug at each end.
FRITZ!X PC is connected to your computer’s serial interface
by means of the serial cable with a nine-pin sub-D plug at
one end.
The AC power adapter cable connects FRITZ!X PC to the elec-
tric outlet.
RJ12 plug RJ45 plug Nine-pin sub-D
plug
F!xpc_e.book Seite 12 Dienstag, 16. Oktober 2001 6:07 18