Operation Manual
8
LEDs
• pentium-class computer or notebook
(500 MHz CPU or better)
• at least 64 MB RAM and 5 MB free memory on the
hard drive
• one CD drive
You can install FRITZ!WLAN USB Stick if your computer
meets all of these requirements.
If you would like to connect additional computers, addi-
tional FRITZ!WLAN USB Sticks are required.
1.3 LEDs
During operation, the orange LEDs on the FRITZ!WLAN USB
Stick indicate the following:
1.4 Technical Specifications
WLAN flashes during data exchange between WLAN
devices
USB remains lit as soon as the FRITZ!WLAN USB
Stick has been detected by the operating sys-
tem
LEDs: 2 (connection / activity)
USB port: USB version 2.0, compatible with
USB 1.1 with reduced data throughput
WLAN module: Support for radio network in accor-
dance with IEEE 802.11g (54 Mbit/s)
and IEEE 802.11b (11 Mbit/s) stan-
dards
Frequency band: 2.4 GHz
Encryption: WPA (Wi-Fi Protected Access) /
WPA2 (802.11i) /
WEP 64-/128-bit (Wired Equivalent
Privacy)
Antenna: Integrated antenna