Operation Manual
16
Information on WLAN Connections
Information on WLAN Connections
If you performed installation using Stick &Surf, no further
steps are necessary to establish a WLAN connection. Your
FRITZ!Box WLAN will be identified automatically as WLAN
access point. A WLAN connection you can use immediate-
ly will be established.
If you performed installation without using Stick & Surf,
you have to select the WLAN remote site (the WLAN access
point) to connect with manually in your WLAN control soft-
ware. Please see the corresponding chapter of the control
software for more information:
• If you are using the control software FRITZ!WLAN,
please continue by reading the section “Establishing
a Connection with a WLAN Access Point (Infrastruc-
ture Network)” from page 20.
• If you are using Microsoft Windows Vista’s WLAN Ser-
vice, depending on the version of Windows you use,
continue reading in the section “Establishing a WLAN
Connection (Windows 7)” from page 25, “Establish-
ing a WLAN Connection (Windows Vista)” from
page 26, or “Establishing a WLAN Connection
(Windows XP from Service Pack 2)” from page 28.