Operation Manual

Installation in Windows 7 / Windows Vista 64-bit Edition
13
5. Then click “Yes” (Windows 7) or “Continue”
(Windows Vista) in the “User Account Control” dia-
log.
The drivers and the control software for the
FRITZ!WLAN USB Stick are installed automatically.
A progress bar indicates the progress and the conclu-
sion of the installation.
This completes the driver installation for the
FRITZ!WLAN USB Stick. Continue reading from section
“Information on WLAN Connections” on page 16.
3.2 Installation in Windows 7 / Windows Vista 64-bit Edition
Administrator rights are required to install the
FRITZ!WLAN USB Stick in Windows 7 or Windows Vista 64-
bit Edition!
In order to install the FRITZ!WLAN USB Stick, perform the
following steps:
1. Switch on the WLAN device you wish to connect to.
2. Switch on your computer.
3. Insert the FRITZ!WLAN USB Stick into the USB port on
your computer.
Windows detects the FRITZ!WLAN USB Stick automat-
ically. This process may take some time.
4. In the “Autoplay” dialog, select the “AVM
FRITZ!WLAN USB Installation” option.
5. Then click “Yes” (Windows 7) or “Continue”
(Windows Vista) in the “User Account Control” dia-
log.
6. In the “Found New Hardware” window, select “Locate
and install driver software (recommended)”.
If Windows reports that the program may not have
been installed correctly, click “The Program was in-
stalled correctly.” or “Cancel”.