Specifications

Checking the Data of the Ad-hoc Connection

The FRITZ!WLAN USB Stick N and a further WLAN adapter

are connected directly via WLAN, but cannot exchange

any data with each other.

Switching the WLAN Channel

An undefined malfunction occurs.

Possible Cause

The IP address was not assigned by Windows automati-

cally (note: the process can take up to three minutes), or

the network key, workgroup or ad-hoc network names do

not match.

Remedy

Make sure that the ad-hoc network name of your connec-

tion and the network key match, and that automatic as-

signment of IP addresses is enabled in your operating

system. The connected computers must be in the same

working group (see also: “Encryption” from page 33 and

“Checking the IP Settings” from page 47).

Possible Cause

Radio traffic is subjected to interference by strong irradi-

ation.

Remedy

Switch the WLAN channel setting on the access point.

Find a better location for the WLAN devices to avoid po-

tential interference from baby monitors, video bridges,

microwaves, cordless DECT telephones or Bluetooth

devices.