Operation Manual

Installing FRITZ!
8 FRITZ! – 2 Installing FRITZ!
2 Installing FRITZ!
This chapter describes the first installation of the FRITZ! com-
munications software.
2.1 Starting Installation
If you have bought a FRITZ!Card, the first step is generally to
install the card in the computer (follow the installation proce-
dure in your ISDN-Controller manual). Then the FRITZ! soft-
ware can be installed using the integrated installation pro-
gram for all software components.
As soon as the installation of the driver software for your
FRITZ!Card has been completed, you can install the FRITZ!
communication software. Read the following sections for in-
structions.
2.2 Configuration During Installation
1. After the welcome screen, you are prompted to enter the
name of the folder in which the FRITZ! communications
software is to be installed.
2. Next, specify the program group for FRITZ! in the Start
menu.
3. Then choose between performing a simple installation
or an installation with configuration.
– If you choose “Installation”, FRITZ! will be installed
with the default parameters. All default settings can
be changed in the individual FRITZ! modules after in-
stallation. See the Online Help for more information. If
you choose “Installation”, FRITZ! is installed on your
computer now. To complete the installation, continue
reading from Step 7 on page 10.
– If you choose “Installation and configuration”, you
will be prompted to set a number of basic options.
Confirm each of your entries by clicking “Continue”.
Enter the settings as follows: