Operation Manual

Controlling Call Acceptance
FRITZ! – 3 FRITZ! in Brief 15
Controlling Call Acceptance
The “ISDN” dialog page contains settings for call acceptance.
This page is found in the Settings dialog in the modules
FRITZ!data, FRITZ!fax and FRITZ!fon.
Incoming fax call acceptance
FRITZ!fax and FRITZ!fon both use the “voice” service indicator,
it is necessary to disable the “all incoming calls” option and
assign these modules different MSNs.
Specifying call acceptance mode (here in FRITZ!fax)
My MSN (outgoing caller ID)
This is the number that the FRITZ! module uses to make outgo-
ing calls. When a connection is established, this number is
the caller ID displayed to the remote partner. Select the option
“Suppress caller ID (CLIR)” to prevent transmission of the
number entered here.
The “CLIR” feature must be supported by the local exchange.
All other options on the “ISDN” page are specific to the indi-
vidual programs. They are described in the Online Help for
each FRITZ! module.